All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: johan+linaro@kernel.org,bhelgaas@google.com,stable@vger.kernel.org
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] PCI/ASPM: Fix deadlock when enabling ASPM" failed to apply to 6.1-stable tree
Date: Tue, 13 Feb 2024 14:25:35 +0100	[thread overview]
Message-ID: <2024021334-each-residence-41ce@gregkh> (raw)


The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 1e560864159d002b453da42bd2c13a1805515a20
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2024021334-each-residence-41ce@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..

Possible dependencies:

1e560864159d ("PCI/ASPM: Fix deadlock when enabling ASPM")
ac865f00af29 ("Merge tag 'pci-v6.7-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 1e560864159d002b453da42bd2c13a1805515a20 Mon Sep 17 00:00:00 2001
From: Johan Hovold <johan+linaro@kernel.org>
Date: Tue, 30 Jan 2024 11:02:43 +0100
Subject: [PATCH] PCI/ASPM: Fix deadlock when enabling ASPM

A last minute revert in 6.7-final introduced a potential deadlock when
enabling ASPM during probe of Qualcomm PCIe controllers as reported by
lockdep:

  ============================================
  WARNING: possible recursive locking detected
  6.7.0 #40 Not tainted
  --------------------------------------------
  kworker/u16:5/90 is trying to acquire lock:
  ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc

              but task is already holding lock:
  ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc

              other info that might help us debug this:
   Possible unsafe locking scenario:

         CPU0
         ----
    lock(pci_bus_sem);
    lock(pci_bus_sem);

               *** DEADLOCK ***

  Call trace:
   print_deadlock_bug+0x25c/0x348
   __lock_acquire+0x10a4/0x2064
   lock_acquire+0x1e8/0x318
   down_read+0x60/0x184
   pcie_aspm_pm_state_change+0x58/0xdc
   pci_set_full_power_state+0xa8/0x114
   pci_set_power_state+0xc4/0x120
   qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom]
   pci_walk_bus+0x64/0xbc
   qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom]

The deadlock can easily be reproduced on machines like the Lenovo ThinkPad
X13s by adding a delay to increase the race window during asynchronous
probe where another thread can take a write lock.

Add a new pci_set_power_state_locked() and associated helper functions that
can be called with the PCI bus semaphore held to avoid taking the read lock
twice.

Link: https://lore.kernel.org/r/ZZu0qx2cmn7IwTyQ@hovoldconsulting.com
Link: https://lore.kernel.org/r/20240130100243.11011-1-johan+linaro@kernel.org
Fixes: f93e71aea6c6 ("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: <stable@vger.kernel.org>	# 6.7

diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index 9c2137dae429..826b5016a101 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -386,21 +386,8 @@ void pci_bus_add_devices(const struct pci_bus *bus)
 }
 EXPORT_SYMBOL(pci_bus_add_devices);
 
-/** pci_walk_bus - walk devices on/under bus, calling callback.
- *  @top      bus whose devices should be walked
- *  @cb       callback to be called for each device found
- *  @userdata arbitrary pointer to be passed to callback.
- *
- *  Walk the given bus, including any bridged devices
- *  on buses under this bus.  Call the provided callback
- *  on each device found.
- *
- *  We check the return of @cb each time. If it returns anything
- *  other than 0, we break out.
- *
- */
-void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
-		  void *userdata)
+static void __pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
+			   void *userdata, bool locked)
 {
 	struct pci_dev *dev;
 	struct pci_bus *bus;
@@ -408,7 +395,8 @@ void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
 	int retval;
 
 	bus = top;
-	down_read(&pci_bus_sem);
+	if (!locked)
+		down_read(&pci_bus_sem);
 	next = top->devices.next;
 	for (;;) {
 		if (next == &bus->devices) {
@@ -431,10 +419,37 @@ void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
 		if (retval)
 			break;
 	}
-	up_read(&pci_bus_sem);
+	if (!locked)
+		up_read(&pci_bus_sem);
+}
+
+/**
+ *  pci_walk_bus - walk devices on/under bus, calling callback.
+ *  @top: bus whose devices should be walked
+ *  @cb: callback to be called for each device found
+ *  @userdata: arbitrary pointer to be passed to callback
+ *
+ *  Walk the given bus, including any bridged devices
+ *  on buses under this bus.  Call the provided callback
+ *  on each device found.
+ *
+ *  We check the return of @cb each time. If it returns anything
+ *  other than 0, we break out.
+ */
+void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *), void *userdata)
+{
+	__pci_walk_bus(top, cb, userdata, false);
 }
 EXPORT_SYMBOL_GPL(pci_walk_bus);
 
+void pci_walk_bus_locked(struct pci_bus *top, int (*cb)(struct pci_dev *, void *), void *userdata)
+{
+	lockdep_assert_held(&pci_bus_sem);
+
+	__pci_walk_bus(top, cb, userdata, true);
+}
+EXPORT_SYMBOL_GPL(pci_walk_bus_locked);
+
 struct pci_bus *pci_bus_get(struct pci_bus *bus)
 {
 	if (bus)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 10f2d0bb86be..2ce2a3bd932b 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -972,7 +972,7 @@ static int qcom_pcie_enable_aspm(struct pci_dev *pdev, void *userdata)
 	 * Downstream devices need to be in D0 state before enabling PCI PM
 	 * substates.
 	 */
-	pci_set_power_state(pdev, PCI_D0);
+	pci_set_power_state_locked(pdev, PCI_D0);
 	pci_enable_link_state_locked(pdev, PCIE_LINK_STATE_ALL);
 
 	return 0;
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index d8f11a078924..9ab9b1008d8b 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1354,6 +1354,7 @@ int pci_power_up(struct pci_dev *dev)
 /**
  * pci_set_full_power_state - Put a PCI device into D0 and update its state
  * @dev: PCI device to power up
+ * @locked: whether pci_bus_sem is held
  *
  * Call pci_power_up() to put @dev into D0, read from its PCI_PM_CTRL register
  * to confirm the state change, restore its BARs if they might be lost and
@@ -1363,7 +1364,7 @@ int pci_power_up(struct pci_dev *dev)
  * to D0, it is more efficient to use pci_power_up() directly instead of this
  * function.
  */
-static int pci_set_full_power_state(struct pci_dev *dev)
+static int pci_set_full_power_state(struct pci_dev *dev, bool locked)
 {
 	u16 pmcsr;
 	int ret;
@@ -1399,7 +1400,7 @@ static int pci_set_full_power_state(struct pci_dev *dev)
 	}
 
 	if (dev->bus->self)
-		pcie_aspm_pm_state_change(dev->bus->self);
+		pcie_aspm_pm_state_change(dev->bus->self, locked);
 
 	return 0;
 }
@@ -1428,10 +1429,22 @@ void pci_bus_set_current_state(struct pci_bus *bus, pci_power_t state)
 		pci_walk_bus(bus, __pci_dev_set_current_state, &state);
 }
 
+static void __pci_bus_set_current_state(struct pci_bus *bus, pci_power_t state, bool locked)
+{
+	if (!bus)
+		return;
+
+	if (locked)
+		pci_walk_bus_locked(bus, __pci_dev_set_current_state, &state);
+	else
+		pci_walk_bus(bus, __pci_dev_set_current_state, &state);
+}
+
 /**
  * pci_set_low_power_state - Put a PCI device into a low-power state.
  * @dev: PCI device to handle.
  * @state: PCI power state (D1, D2, D3hot) to put the device into.
+ * @locked: whether pci_bus_sem is held
  *
  * Use the device's PCI_PM_CTRL register to put it into a low-power state.
  *
@@ -1442,7 +1455,7 @@ void pci_bus_set_current_state(struct pci_bus *bus, pci_power_t state)
  * 0 if device already is in the requested state.
  * 0 if device's power state has been successfully changed.
  */
-static int pci_set_low_power_state(struct pci_dev *dev, pci_power_t state)
+static int pci_set_low_power_state(struct pci_dev *dev, pci_power_t state, bool locked)
 {
 	u16 pmcsr;
 
@@ -1496,29 +1509,12 @@ static int pci_set_low_power_state(struct pci_dev *dev, pci_power_t state)
 				     pci_power_name(state));
 
 	if (dev->bus->self)
-		pcie_aspm_pm_state_change(dev->bus->self);
+		pcie_aspm_pm_state_change(dev->bus->self, locked);
 
 	return 0;
 }
 
-/**
- * pci_set_power_state - Set the power state of a PCI device
- * @dev: PCI device to handle.
- * @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
- *
- * Transition a device to a new power state, using the platform firmware and/or
- * the device's PCI PM registers.
- *
- * RETURN VALUE:
- * -EINVAL if the requested state is invalid.
- * -EIO if device does not support PCI PM or its PM capabilities register has a
- * wrong version, or device doesn't support the requested state.
- * 0 if the transition is to D1 or D2 but D1 and D2 are not supported.
- * 0 if device already is in the requested state.
- * 0 if the transition is to D3 but D3 is not supported.
- * 0 if device's power state has been successfully changed.
- */
-int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
+static int __pci_set_power_state(struct pci_dev *dev, pci_power_t state, bool locked)
 {
 	int error;
 
@@ -1542,7 +1538,7 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
 		return 0;
 
 	if (state == PCI_D0)
-		return pci_set_full_power_state(dev);
+		return pci_set_full_power_state(dev, locked);
 
 	/*
 	 * This device is quirked not to be put into D3, so don't put it in
@@ -1556,16 +1552,16 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
 		 * To put the device in D3cold, put it into D3hot in the native
 		 * way, then put it into D3cold using platform ops.
 		 */
-		error = pci_set_low_power_state(dev, PCI_D3hot);
+		error = pci_set_low_power_state(dev, PCI_D3hot, locked);
 
 		if (pci_platform_power_transition(dev, PCI_D3cold))
 			return error;
 
 		/* Powering off a bridge may power off the whole hierarchy */
 		if (dev->current_state == PCI_D3cold)
-			pci_bus_set_current_state(dev->subordinate, PCI_D3cold);
+			__pci_bus_set_current_state(dev->subordinate, PCI_D3cold, locked);
 	} else {
-		error = pci_set_low_power_state(dev, state);
+		error = pci_set_low_power_state(dev, state, locked);
 
 		if (pci_platform_power_transition(dev, state))
 			return error;
@@ -1573,8 +1569,38 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
 
 	return 0;
 }
+
+/**
+ * pci_set_power_state - Set the power state of a PCI device
+ * @dev: PCI device to handle.
+ * @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
+ *
+ * Transition a device to a new power state, using the platform firmware and/or
+ * the device's PCI PM registers.
+ *
+ * RETURN VALUE:
+ * -EINVAL if the requested state is invalid.
+ * -EIO if device does not support PCI PM or its PM capabilities register has a
+ * wrong version, or device doesn't support the requested state.
+ * 0 if the transition is to D1 or D2 but D1 and D2 are not supported.
+ * 0 if device already is in the requested state.
+ * 0 if the transition is to D3 but D3 is not supported.
+ * 0 if device's power state has been successfully changed.
+ */
+int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
+{
+	return __pci_set_power_state(dev, state, false);
+}
 EXPORT_SYMBOL(pci_set_power_state);
 
+int pci_set_power_state_locked(struct pci_dev *dev, pci_power_t state)
+{
+	lockdep_assert_held(&pci_bus_sem);
+
+	return __pci_set_power_state(dev, state, true);
+}
+EXPORT_SYMBOL(pci_set_power_state_locked);
+
 #define PCI_EXP_SAVE_REGS	7
 
 static struct pci_cap_saved_state *_pci_find_saved_cap(struct pci_dev *pci_dev,
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 2336a8d1edab..e9750b1b19ba 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -571,12 +571,12 @@ int pcie_retrain_link(struct pci_dev *pdev, bool use_lt);
 #ifdef CONFIG_PCIEASPM
 void pcie_aspm_init_link_state(struct pci_dev *pdev);
 void pcie_aspm_exit_link_state(struct pci_dev *pdev);
-void pcie_aspm_pm_state_change(struct pci_dev *pdev);
+void pcie_aspm_pm_state_change(struct pci_dev *pdev, bool locked);
 void pcie_aspm_powersave_config_link(struct pci_dev *pdev);
 #else
 static inline void pcie_aspm_init_link_state(struct pci_dev *pdev) { }
 static inline void pcie_aspm_exit_link_state(struct pci_dev *pdev) { }
-static inline void pcie_aspm_pm_state_change(struct pci_dev *pdev) { }
+static inline void pcie_aspm_pm_state_change(struct pci_dev *pdev, bool locked) { }
 static inline void pcie_aspm_powersave_config_link(struct pci_dev *pdev) { }
 #endif
 
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 5a0066ecc3c5..bc0bd86695ec 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -1003,8 +1003,11 @@ void pcie_aspm_exit_link_state(struct pci_dev *pdev)
 	up_read(&pci_bus_sem);
 }
 
-/* @pdev: the root port or switch downstream port */
-void pcie_aspm_pm_state_change(struct pci_dev *pdev)
+/*
+ * @pdev: the root port or switch downstream port
+ * @locked: whether pci_bus_sem is held
+ */
+void pcie_aspm_pm_state_change(struct pci_dev *pdev, bool locked)
 {
 	struct pcie_link_state *link = pdev->link_state;
 
@@ -1014,12 +1017,14 @@ void pcie_aspm_pm_state_change(struct pci_dev *pdev)
 	 * Devices changed PM state, we should recheck if latency
 	 * meets all functions' requirement
 	 */
-	down_read(&pci_bus_sem);
+	if (!locked)
+		down_read(&pci_bus_sem);
 	mutex_lock(&aspm_lock);
 	pcie_update_aspm_capable(link->root);
 	pcie_config_aspm_path(link);
 	mutex_unlock(&aspm_lock);
-	up_read(&pci_bus_sem);
+	if (!locked)
+		up_read(&pci_bus_sem);
 }
 
 void pcie_aspm_powersave_config_link(struct pci_dev *pdev)
diff --git a/include/linux/pci.h b/include/linux/pci.h
index add9368e6314..7ab0d13672da 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1422,6 +1422,7 @@ int pci_load_and_free_saved_state(struct pci_dev *dev,
 				  struct pci_saved_state **state);
 int pci_platform_power_transition(struct pci_dev *dev, pci_power_t state);
 int pci_set_power_state(struct pci_dev *dev, pci_power_t state);
+int pci_set_power_state_locked(struct pci_dev *dev, pci_power_t state);
 pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state);
 bool pci_pme_capable(struct pci_dev *dev, pci_power_t state);
 void pci_pme_active(struct pci_dev *dev, bool enable);
@@ -1625,6 +1626,8 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max,
 
 void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
 		  void *userdata);
+void pci_walk_bus_locked(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
+			 void *userdata);
 int pci_cfg_space_size(struct pci_dev *dev);
 unsigned char pci_bus_max_busnr(struct pci_bus *bus);
 void pci_setup_bridge(struct pci_bus *bus);
@@ -2025,6 +2028,8 @@ static inline int pci_save_state(struct pci_dev *dev) { return 0; }
 static inline void pci_restore_state(struct pci_dev *dev) { }
 static inline int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
 { return 0; }
+static inline int pci_set_power_state_locked(struct pci_dev *dev, pci_power_t state)
+{ return 0; }
 static inline int pci_wake_from_d3(struct pci_dev *dev, bool enable)
 { return 0; }
 static inline pci_power_t pci_choose_state(struct pci_dev *dev,


             reply	other threads:[~2024-02-13 13:25 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-13 13:25 gregkh [this message]
2024-04-23 20:34 ` [PATCH 6.1.y] PCI/ASPM: Fix deadlock when enabling ASPM Bjorn Helgaas
2024-04-23 20:39   ` Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2024021334-each-residence-41ce@gregkh \
    --to=gregkh@linuxfoundation.org \
    --cc=bhelgaas@google.com \
    --cc=johan+linaro@kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.