Re: [PATCH] dt-bindings: PCI: ti,am65: Fix remaining binding warnings

[Rob Herring <robh@kernel.org>]

On Thu, Feb 15, 2024 at 09:14:47AM +0100, Jan Kiszka wrote:
> From: Jan Kiszka <jan.kiszka@siemens.com>
> 
> This adds the missing num-viewport, phys and phy-name properties to the
> schema. Based on driver code, num-viewport is required for the root
> complex, phys are optional. Their number corresponds to the number of
> lanes. The AM65x supports up to 2 lanes.

This is DW controller, right? num-viewport shouldn't be required. The 
number of iATU entries is determined at runtime now. If it stays, it 
should be deprecated.

> 
> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
> ---
>  .../bindings/pci/ti,am65-pci-host.yaml        | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml
> index a20dccbafd94..cdd6834f6a6f 100644
> --- a/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml
> +++ b/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml
> @@ -55,6 +55,20 @@ properties:
>  
>    dma-coherent: true
>  
> +  num-viewport:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +
> +  phys:
> +    description: per-lane PHYs
> +    minItems: 1
> +    maxItems: 2
> +
> +  phy-names:
> +    minItems: 1
> +    maxItems: 2
> +    items:
> +      pattern: '^pcie-phy[0-9]+$'

0-1 only

> +
>  required:
>    - compatible
>    - reg
> @@ -74,6 +88,7 @@ then:
>      - dma-coherent
>      - power-domains
>      - msi-map
> +    - num-viewport
>  
>  unevaluatedProperties: false
>  
> @@ -98,9 +113,13 @@ examples:
>          ti,syscon-pcie-id = <&scm_conf 0x0210>;
>          ti,syscon-pcie-mode = <&scm_conf 0x4060>;
>          bus-range = <0x0 0xff>;
> +        num-viewport = <16>;
>          max-link-speed = <2>;
>          dma-coherent;
>          interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
>          msi-map = <0x0 &gic_its 0x0 0x10000>;
>          device_type = "pci";
> +        num-lanes = <1>;
> +        phys = <&serdes0 PHY_TYPE_PCIE 0>;
> +        phy-names = "pcie-phy0";
>      };
> -- 
> 2.35.3