All of lore.kernel.org
 help / color / mirror / Atom feed
From: Eric Farman <farman@linux.ibm.com>
To: Christian Borntraeger <borntraeger@linux.ibm.com>,
	Janosch Frank <frankja@linux.ibm.com>,
	Claudio Imbrenda <imbrenda@linux.ibm.com>,
	David Hildenbrand <david@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>,
	Vasily Gorbik <gor@linux.ibm.com>,
	Alexander Gordeev <agordeev@linux.ibm.com>,
	Sven Schnelle <svens@linux.ibm.com>,
	Paolo Bonzini <pbonzini@redhat.com>,
	Shuah Khan <shuah@kernel.org>,
	kvm@vger.kernel.org, linux-s390@vger.kernel.org,
	linux-kselftest@vger.kernel.org,
	Eric Farman <farman@linux.ibm.com>
Subject: [PATCH v2 1/2] KVM: s390: load guest access registers in MEM_OP ioctl
Date: Thu, 15 Feb 2024 21:53:43 +0100	[thread overview]
Message-ID: <20240215205344.2562020-2-farman@linux.ibm.com> (raw)
In-Reply-To: <20240215205344.2562020-1-farman@linux.ibm.com>

The routine ar_translation() can be reached by both the instruction
intercept path (where the access registers had been loaded with the
guest register contents), and the MEM_OP ioctls (which hadn't).
This latter case means that any ALET the guest expects to be used
would be ignored.

Fix this by swapping the host/guest access registers around the
MEM_OP ioctl, in the same way that the KVM_RUN ioctl does with
sync_regs()/store_regs(). The full register swap isn't needed here,
since only the access registers are used in this interface.

Introduce a boolean in the kvm_vcpu_arch struct to indicate the
guest ARs have been loaded into the registers. This permits a
warning to be emitted if entering this path without a proper
register setup.

Suggested-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
---
 arch/s390/include/asm/kvm_host.h |  1 +
 arch/s390/kvm/gaccess.c          |  2 ++
 arch/s390/kvm/kvm-s390.c         | 11 +++++++++++
 3 files changed, 14 insertions(+)

diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index 52664105a473..c86215eb4ca7 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -765,6 +765,7 @@ struct kvm_vcpu_arch {
 	__u64 cputm_start;
 	bool gs_enabled;
 	bool skey_enabled;
+	bool acrs_loaded;
 	struct kvm_s390_pv_vcpu pv;
 	union diag318_info diag318_info;
 };
diff --git a/arch/s390/kvm/gaccess.c b/arch/s390/kvm/gaccess.c
index 5bfcc50c1a68..33587bb4c9e8 100644
--- a/arch/s390/kvm/gaccess.c
+++ b/arch/s390/kvm/gaccess.c
@@ -391,6 +391,8 @@ static int ar_translation(struct kvm_vcpu *vcpu, union asce *asce, u8 ar,
 	if (ar >= NUM_ACRS)
 		return -EINVAL;
 
+	WARN_ON_ONCE(!vcpu->arch.acrs_loaded);
+
 	save_access_regs(vcpu->run->s.regs.acrs);
 	alet.val = vcpu->run->s.regs.acrs[ar];
 
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index ea63ac769889..c60ec561f7f1 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -3951,6 +3951,7 @@ int kvm_arch_vcpu_create(struct kvm_vcpu *vcpu)
 				    KVM_SYNC_ARCH0 |
 				    KVM_SYNC_PFAULT |
 				    KVM_SYNC_DIAG318;
+	vcpu->arch.acrs_loaded = false;
 	kvm_s390_set_prefix(vcpu, 0);
 	if (test_kvm_facility(vcpu->kvm, 64))
 		vcpu->run->kvm_valid_regs |= KVM_SYNC_RICCB;
@@ -4951,6 +4952,7 @@ static void sync_regs(struct kvm_vcpu *vcpu)
 	}
 	save_access_regs(vcpu->arch.host_acrs);
 	restore_access_regs(vcpu->run->s.regs.acrs);
+	vcpu->arch.acrs_loaded = true;
 	/* save host (userspace) fprs/vrs */
 	save_fpu_regs();
 	vcpu->arch.host_fpregs.fpc = current->thread.fpu.fpc;
@@ -5021,6 +5023,7 @@ static void store_regs(struct kvm_vcpu *vcpu)
 	kvm_run->s.regs.pfc = vcpu->arch.pfault_compare;
 	save_access_regs(vcpu->run->s.regs.acrs);
 	restore_access_regs(vcpu->arch.host_acrs);
+	vcpu->arch.acrs_loaded = false;
 	/* Save guest register state */
 	save_fpu_regs();
 	vcpu->run->s.regs.fpc = current->thread.fpu.fpc;
@@ -5391,6 +5394,11 @@ static long kvm_s390_vcpu_mem_op(struct kvm_vcpu *vcpu,
 			return -ENOMEM;
 	}
 
+	/* Swap host/guest access registers */
+	save_access_regs(vcpu->arch.host_acrs);
+	restore_access_regs(vcpu->run->s.regs.acrs);
+	vcpu->arch.acrs_loaded = true;
+
 	acc_mode = mop->op == KVM_S390_MEMOP_LOGICAL_READ ? GACC_FETCH : GACC_STORE;
 	if (mop->flags & KVM_S390_MEMOP_F_CHECK_ONLY) {
 		r = check_gva_range(vcpu, mop->gaddr, mop->ar, mop->size,
@@ -5420,6 +5428,9 @@ static long kvm_s390_vcpu_mem_op(struct kvm_vcpu *vcpu,
 		kvm_s390_inject_prog_irq(vcpu, &vcpu->arch.pgm);
 
 out_free:
+	save_access_regs(vcpu->run->s.regs.acrs);
+	restore_access_regs(vcpu->arch.host_acrs);
+	vcpu->arch.acrs_loaded = false;
 	vfree(tmpbuf);
 	return r;
 }
-- 
2.40.1


  reply	other threads:[~2024-02-15 20:53 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-15 20:53 [PATCH v2 0/2] KVM: s390: Fix AR parameter in MEM_OP ioctl Eric Farman
2024-02-15 20:53 ` Eric Farman [this message]
2024-02-16  9:40   ` [PATCH v2 1/2] KVM: s390: load guest access registers " Heiko Carstens
2024-02-16 16:33     ` Eric Farman
2024-02-16 21:18       ` Eric Farman
2024-02-15 20:53 ` [PATCH v2 2/2] KVM: s390: selftests: memop: add a simple AR test Eric Farman
2024-02-20 13:34   ` Nina Schoetterl-Glausch
2024-02-20 15:44     ` Eric Farman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240215205344.2562020-2-farman@linux.ibm.com \
    --to=farman@linux.ibm.com \
    --cc=agordeev@linux.ibm.com \
    --cc=borntraeger@linux.ibm.com \
    --cc=david@redhat.com \
    --cc=frankja@linux.ibm.com \
    --cc=gor@linux.ibm.com \
    --cc=hca@linux.ibm.com \
    --cc=imbrenda@linux.ibm.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kselftest@vger.kernel.org \
    --cc=linux-s390@vger.kernel.org \
    --cc=pbonzini@redhat.com \
    --cc=shuah@kernel.org \
    --cc=svens@linux.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.