All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Geert Uytterhoeven <geert@linux-m68k.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Andy Shevchenko <andy@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Robin van der Gracht <robin@protonic.nl>,
	Paul Burton <paulburton@kernel.org>
Subject: [PATCH v3 9/9] auxdisplay: Add driver for MAX695x 7-segment LED controllers
Date: Mon, 19 Feb 2024 18:58:08 +0200	[thread overview]
Message-ID: <20240219170337.2161754-10-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20240219170337.2161754-1-andriy.shevchenko@linux.intel.com>

Add initial driver for the MAX6958 and MAX6959 7-segment LED
controllers.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/auxdisplay/Kconfig   |  14 +++
 drivers/auxdisplay/Makefile  |   1 +
 drivers/auxdisplay/max6959.c | 194 +++++++++++++++++++++++++++++++++++
 3 files changed, 209 insertions(+)
 create mode 100644 drivers/auxdisplay/max6959.c

diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig
index 109ac253d160..bc295ede3c2c 100644
--- a/drivers/auxdisplay/Kconfig
+++ b/drivers/auxdisplay/Kconfig
@@ -59,6 +59,20 @@ config LCD2S
 	  is a simple single color character display. You have to connect it
 	  to an I2C bus.
 
+config MAX6959
+	tristate "Maxim MAX6958/6959 7-segment LED controller"
+	depends on I2C
+	select REGMAP_I2C
+	select LINEDISP
+	help
+	  If you say yes here you get support for the following Maxim chips
+	  (I2C 7-segment LED display controller):
+	  - MAX6958
+	  - MAX6959 (input support)
+
+	  This driver can also be built as a module. If so, the module
+	  will be called max6959.
+
 menuconfig PARPORT_PANEL
 	tristate "Parallel port LCD/Keypad Panel support"
 	depends on PARPORT
diff --git a/drivers/auxdisplay/Makefile b/drivers/auxdisplay/Makefile
index 9197ea34e2d6..9718aedf6ee2 100644
--- a/drivers/auxdisplay/Makefile
+++ b/drivers/auxdisplay/Makefile
@@ -15,5 +15,6 @@ obj-$(CONFIG_CFAG12864B)	+= cfag12864b.o cfag12864bfb.o
 obj-$(CONFIG_LINEDISP)		+= line-display.o
 obj-$(CONFIG_IMG_ASCII_LCD)	+= img-ascii-lcd.o
 obj-$(CONFIG_HT16K33)		+= ht16k33.o
+obj-$(CONFIG_MAX6959)		+= max6959.o
 
 obj-$(CONFIG_ARM_CHARLCD)	+= arm-charlcd.o
diff --git a/drivers/auxdisplay/max6959.c b/drivers/auxdisplay/max6959.c
new file mode 100644
index 000000000000..5519c014bd29
--- /dev/null
+++ b/drivers/auxdisplay/max6959.c
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * MAX6958/6959 7-segment LED display controller
+ * Datasheet:
+ * https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6958-MAX6959.pdf
+ *
+ * Copyright (c) 2024, Intel Corporation.
+ * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ */
+#include <linux/array_size.h>
+#include <linux/bitrev.h>
+#include <linux/bits.h>
+#include <linux/container_of.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+
+#include <linux/map_to_7segment.h>
+
+#include "line-display.h"
+
+/* Registers */
+#define REG_DECODE_MODE			0x01
+#define REG_INTENSITY			0x02
+#define REG_SCAN_LIMIT			0x03
+#define REG_CONFIGURATION		0x04
+#define REG_CONFIGURATION_S_BIT		BIT(0)
+
+#define REG_DIGIT(x)			(0x20 + (x))
+#define REG_DIGIT0			0x20
+#define REG_DIGIT1			0x21
+#define REG_DIGIT2			0x22
+#define REG_DIGIT3			0x23
+
+#define REG_SEGMENTS			0x24
+#define REG_MAX				REG_SEGMENTS
+
+struct max6959_priv {
+	struct linedisp linedisp;
+	struct delayed_work work;
+	struct regmap *regmap;
+};
+
+static void max6959_disp_update(struct work_struct *work)
+{
+	struct max6959_priv *priv = container_of(work, struct max6959_priv, work.work);
+	struct linedisp *linedisp = &priv->linedisp;
+	struct linedisp_map *map = linedisp->map;
+	char *s = linedisp->buf;
+	u8 buf[4];
+
+	/* Map segments according to datasheet */
+	buf[0] = bitrev8(map_to_seg7(&map->map.seg7, *s++)) >> 1;
+	buf[1] = bitrev8(map_to_seg7(&map->map.seg7, *s++)) >> 1;
+	buf[2] = bitrev8(map_to_seg7(&map->map.seg7, *s++)) >> 1;
+	buf[3] = bitrev8(map_to_seg7(&map->map.seg7, *s++)) >> 1;
+
+	regmap_bulk_write(priv->regmap, REG_DIGIT(0), buf, ARRAY_SIZE(buf));
+}
+
+static int max6959_linedisp_get_map_type(struct linedisp *linedisp)
+{
+	struct max6959_priv *priv = container_of(linedisp, struct max6959_priv, linedisp);
+
+	INIT_DELAYED_WORK(&priv->work, max6959_disp_update);
+	return LINEDISP_MAP_SEG7;
+}
+
+static void max6959_linedisp_update(struct linedisp *linedisp)
+{
+	struct max6959_priv *priv = container_of(linedisp, struct max6959_priv, linedisp);
+
+	schedule_delayed_work(&priv->work, 0);
+}
+
+static const struct linedisp_ops max6959_linedisp_ops = {
+	.get_map_type = max6959_linedisp_get_map_type,
+	.update = max6959_linedisp_update,
+};
+
+static int max6959_enable(struct max6959_priv *priv, bool enable)
+{
+	u8 mask = REG_CONFIGURATION_S_BIT;
+	u8 value = enable ? mask : 0;
+
+	return regmap_update_bits(priv->regmap, REG_CONFIGURATION, mask, value);
+}
+
+static void max6959_power_off(void *priv)
+{
+	max6959_enable(priv, false);
+}
+
+static int max6959_power_on(struct max6959_priv *priv)
+{
+	struct device *dev = regmap_get_device(priv->regmap);
+	int ret;
+
+	ret = max6959_enable(priv, true);
+	if (ret)
+		return ret;
+
+	return devm_add_action_or_reset(dev, max6959_power_off, priv);
+}
+
+static const struct regmap_config max6959_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = REG_MAX,
+	.cache_type = REGCACHE_MAPLE,
+};
+
+static int max6959_i2c_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct max6959_priv *priv;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->regmap = devm_regmap_init_i2c(client, &max6959_regmap_config);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	ret = max6959_power_on(priv);
+	if (ret)
+		return ret;
+
+	ret = linedisp_register(&priv->linedisp, dev, 4, &max6959_linedisp_ops);
+	if (ret)
+		return ret;
+
+	i2c_set_clientdata(client, priv);
+
+	return 0;
+}
+
+static void max6959_i2c_remove(struct i2c_client *client)
+{
+	struct max6959_priv *priv = i2c_get_clientdata(client);
+
+	cancel_delayed_work_sync(&priv->work);
+	linedisp_unregister(&priv->linedisp);
+}
+
+static int max6959_suspend(struct device *dev)
+{
+	return max6959_enable(dev_get_drvdata(dev), false);
+}
+
+static int max6959_resume(struct device *dev)
+{
+	return max6959_enable(dev_get_drvdata(dev), true);
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(max6959_pm_ops, max6959_suspend, max6959_resume);
+
+static const struct i2c_device_id max6959_i2c_id[] = {
+	{ "max6959" },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, max6959_i2c_id);
+
+static const struct of_device_id max6959_of_table[] = {
+	{ .compatible = "maxim,max6959" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, max6959_of_table);
+
+static struct i2c_driver max6959_i2c_driver = {
+	.driver = {
+		.name = "max6959",
+		.pm = pm_sleep_ptr(&max6959_pm_ops),
+		.of_match_table = max6959_of_table,
+	},
+	.probe = max6959_i2c_probe,
+	.remove = max6959_i2c_remove,
+	.id_table = max6959_i2c_id,
+};
+module_i2c_driver(max6959_i2c_driver);
+
+MODULE_DESCRIPTION("MAX6958/6959 7-segment LED controller");
+MODULE_AUTHOR("Andy Shevchenko <andriy.shevchenko@linux.intel.com>");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(LINEDISP);
-- 
2.43.0.rc1.1.gbec44491f096


  parent reply	other threads:[~2024-02-19 17:03 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-19 16:57 [PATCH v3 0/9] auxdisplay: linedisp: Clean up and add new driver Andy Shevchenko
2024-02-19 16:58 ` [PATCH v3 1/9] auxdisplay: linedisp: Group display drivers together Andy Shevchenko
2024-02-26 15:28   ` Geert Uytterhoeven
2024-02-26 16:00     ` Andy Shevchenko
2024-02-26 16:03       ` Geert Uytterhoeven
2024-02-26 16:15         ` Andy Shevchenko
2024-02-19 16:58 ` [PATCH v3 2/9] auxdisplay: linedisp: Allocate buffer for the string Andy Shevchenko
2024-02-26 15:36   ` Geert Uytterhoeven
2024-02-19 16:58 ` [PATCH v3 3/9] auxdisplay: ht16k33: Add default to switch-cases Andy Shevchenko
2024-02-26 15:38   ` Geert Uytterhoeven
2024-02-19 16:58 ` [PATCH v3 4/9] auxdisplay: ht16k33: Move ht16k33_linedisp_ops down Andy Shevchenko
2024-02-19 16:58 ` [PATCH v3 5/9] auxdisplay: ht16k33: Define a few helper macros Andy Shevchenko
2024-02-20 18:05   ` Andy Shevchenko
2024-02-26 15:40     ` Geert Uytterhoeven
2024-02-19 16:58 ` [PATCH v3 6/9] auxdisplay: ht16k33: Switch to use line display character mapping Andy Shevchenko
2024-02-19 16:58 ` [PATCH v3 7/9] auxdisplay: ht16k33: Drop struct ht16k33_seg Andy Shevchenko
2024-02-26 15:44   ` Geert Uytterhoeven
2024-02-19 16:58 ` [PATCH v3 8/9] dt-bindings: auxdisplay: Add Maxim MAX6958/6959 Andy Shevchenko
2024-02-26 15:52   ` Geert Uytterhoeven
2024-02-26 17:03     ` Andy Shevchenko
2024-02-19 16:58 ` Andy Shevchenko [this message]
2024-02-26 16:01   ` [PATCH v3 9/9] auxdisplay: Add driver for MAX695x 7-segment LED controllers Geert Uytterhoeven
2024-02-26 16:17     ` Andy Shevchenko
2024-02-26 16:58       ` Geert Uytterhoeven
2024-02-26 17:04     ` Andy Shevchenko
2024-02-22 13:51 ` [PATCH v3 0/9] auxdisplay: linedisp: Clean up and add new driver Andy Shevchenko
2024-02-22 13:56   ` Geert Uytterhoeven
2024-02-26 14:30     ` Andy Shevchenko
2024-02-26 16:24     ` Andy Shevchenko
2024-02-26 18:00       ` Andy Shevchenko
2024-02-26 18:13         ` Geert Uytterhoeven

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240219170337.2161754-10-andriy.shevchenko@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=andy@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=geert@linux-m68k.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=krzysztof.kozlowski@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=paulburton@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=robin@protonic.nl \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.