[merged mm-stable] docs-translations-damon-usage-update-for-monitor_on-renaming.patch removed from -mm tree

[Andrew Morton <akpm@linux-foundation.org>]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 8929 bytes --]


The quilt patch titled
     Subject: Docs/translations/damon/usage: update for monitor_on renaming
has been removed from the -mm tree.  Its filename was
     docs-translations-damon-usage-update-for-monitor_on-renaming.patch

This patch was dropped because it was merged into the mm-stable branch
of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

------------------------------------------------------
From: SeongJae Park <sj@kernel.org>
Subject: Docs/translations/damon/usage: update for monitor_on renaming
Date: Mon, 29 Jan 2024 17:35:48 -0800

Update DAMON debugfs interface sections on the translated usage documents
to reflect the fact that 'monitor_on' file has renamed to
'monitor_on_DEPRECATED'.

Link: https://lkml.kernel.org/r/20240130013549.89538-10-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Alex Shi <alexs@kernel.org>
Cc: Hu Haowen <2023002089@link.tyut.edu.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---

 Documentation/translations/zh_CN/admin-guide/mm/damon/usage.rst |   20 +++++-----
 Documentation/translations/zh_TW/admin-guide/mm/damon/usage.rst |   20 +++++-----
 2 files changed, 20 insertions(+), 20 deletions(-)

--- a/Documentation/translations/zh_CN/admin-guide/mm/damon/usage.rst~docs-translations-damon-usage-update-for-monitor_on-renaming
+++ a/Documentation/translations/zh_CN/admin-guide/mm/damon/usage.rst
@@ -344,7 +344,7 @@ debugfs接口
   :ref:`sysfs接口<sysfs_interface>`。
 
 DAMON导出了八个文件, ``attrs``, ``target_ids``, ``init_regions``,
-``schemes``, ``monitor_on``, ``kdamond_pid``, ``mk_contexts`` 和
+``schemes``, ``monitor_on_DEPRECATED``, ``kdamond_pid``, ``mk_contexts`` 和
 ``rm_contexts`` under its debugfs directory, ``<debugfs>/damon/``.
 
 
@@ -521,15 +521,15 @@ 大于60%，或低于30%，则停止监æ
 开关
 ----
 
-除非你明确地启动监测，否则如上所述的文件设置不会产生效果。你可以通过写入和读取 ``monitor_on``
+除非你明确地启动监测，否则如上所述的文件设置不会产生效果。你可以通过写入和读取 ``monitor_on_DEPRECATED``
 文件来启动、停止和检查监测的当前状态。写入 ``on`` 该文件可以启动对有属性的目标的监测。写入
 ``off`` 该文件则停止这些目标。如果每个目标进程被终止，DAMON也会停止。下面的示例命令开启、关
 闭和检查DAMON的状态::
 
     # cd <debugfs>/damon
-    # echo on > monitor_on
-    # echo off > monitor_on
-    # cat monitor_on
+    # echo on > monitor_on_DEPRECATED
+    # echo off > monitor_on_DEPRECATED
+    # cat monitor_on_DEPRECATED
     off
 
 请注意，当监测开启时，你不能写到上述的debugfs文件。如果你在DAMON运行时写到这些文件，将会返
@@ -543,11 +543,11 @@ DAMON通过一个叫做kdamond的内核ç
 得该线程的 ``pid`` 。当监测被 ``关闭`` 时，读取该文件不会返回任何信息::
 
     # cd <debugfs>/damon
-    # cat monitor_on
+    # cat monitor_on_DEPRECATED
     off
     # cat kdamond_pid
     none
-    # echo on > monitor_on
+    # echo on > monitor_on_DEPRECATED
     # cat kdamond_pid
     18594
 
@@ -574,7 +574,7 @@ 如果不再需要上下文，你可以é
     # ls foo
     # ls: cannot access 'foo': No such file or directory
 
-注意， ``mk_contexts`` 、 ``rm_contexts`` 和 ``monitor_on`` 文件只在根目录下。
+注意， ``mk_contexts`` 、 ``rm_contexts`` 和 ``monitor_on_DEPRECATED`` 文件只在根目录下。
 
 
 监测结果的监测点
@@ -583,9 +583,9 @@ 监测结果的监测点
 DAMON通过一个tracepoint ``damon:damon_aggregated`` 提供监测结果.  当监测开启时，你可
 以记录追踪点事件，并使用追踪点支持工具如perf显示结果。比如说::
 
-    # echo on > monitor_on
+    # echo on > monitor_on_DEPRECATED
     # perf record -e damon:damon_aggregated &
     # sleep 5
     # kill 9 $(pidof perf)
-    # echo off > monitor_on
+    # echo off > monitor_on_DEPRECATED
     # perf script
--- a/Documentation/translations/zh_TW/admin-guide/mm/damon/usage.rst~docs-translations-damon-usage-update-for-monitor_on-renaming
+++ a/Documentation/translations/zh_TW/admin-guide/mm/damon/usage.rst
@@ -344,7 +344,7 @@ debugfs接口
   :ref:`sysfs接口<sysfs_interface>`。
 
 DAMON導出了八個文件, ``attrs``, ``target_ids``, ``init_regions``,
-``schemes``, ``monitor_on``, ``kdamond_pid``, ``mk_contexts`` 和
+``schemes``, ``monitor_on_DEPRECATED``, ``kdamond_pid``, ``mk_contexts`` 和
 ``rm_contexts`` under its debugfs directory, ``<debugfs>/damon/``.
 
 
@@ -521,15 +521,15 @@ 大於60%，或低於30%，則停止監æ
 開關
 ----
 
-除非你明確地啓動監測，否則如上所述的文件設置不會產生效果。你可以通過寫入和讀取 ``monitor_on``
+除非你明確地啓動監測，否則如上所述的文件設置不會產生效果。你可以通過寫入和讀取 ``monitor_on_DEPRECATED``
 文件來啓動、停止和檢查監測的當前狀態。寫入 ``on`` 該文件可以啓動對有屬性的目標的監測。寫入
 ``off`` 該文件則停止這些目標。如果每個目標進程被終止，DAMON也會停止。下面的示例命令開啓、關
 閉和檢查DAMON的狀態::
 
     # cd <debugfs>/damon
-    # echo on > monitor_on
-    # echo off > monitor_on
-    # cat monitor_on
+    # echo on > monitor_on_DEPRECATED
+    # echo off > monitor_on_DEPRECATED
+    # cat monitor_on_DEPRECATED
     off
 
 請注意，當監測開啓時，你不能寫到上述的debugfs文件。如果你在DAMON運行時寫到這些文件，將會返
@@ -543,11 +543,11 @@ DAMON通過一個叫做kdamond的內核ç
 得該線程的 ``pid`` 。當監測被 ``關閉`` 時，讀取該文件不會返回任何信息::
 
     # cd <debugfs>/damon
-    # cat monitor_on
+    # cat monitor_on_DEPRECATED
     off
     # cat kdamond_pid
     none
-    # echo on > monitor_on
+    # echo on > monitor_on_DEPRECATED
     # cat kdamond_pid
     18594
 
@@ -574,7 +574,7 @@ 如果不再需要上下文，你可以é
     # ls foo
     # ls: cannot access 'foo': No such file or directory
 
-注意， ``mk_contexts`` 、 ``rm_contexts`` 和 ``monitor_on`` 文件只在根目錄下。
+注意， ``mk_contexts`` 、 ``rm_contexts`` 和 ``monitor_on_DEPRECATED`` 文件只在根目錄下。
 
 
 監測結果的監測點
@@ -583,10 +583,10 @@ 監測結果的監測點
 DAMON通過一個tracepoint ``damon:damon_aggregated`` 提供監測結果.  當監測開啓時，你可
 以記錄追蹤點事件，並使用追蹤點支持工具如perf顯示結果。比如說::
 
-    # echo on > monitor_on
+    # echo on > monitor_on_DEPRECATED
     # perf record -e damon:damon_aggregated &
     # sleep 5
     # kill 9 $(pidof perf)
-    # echo off > monitor_on
+    # echo off > monitor_on_DEPRECATED
     # perf script
 
_

Patches currently in -mm which might be from sj@kernel.org are

docs-mm-damon-maintainer-profile-fix-reference-links-for-mm-stable-tree.patch
docs-mm-damon-move-the-list-of-damos-actions-to-design-doc.patch
docs-mm-damon-move-damon-operation-sets-list-from-the-usage-to-the-design-document.patch
docs-mm-damon-move-damon-operation-sets-list-from-the-usage-to-the-design-document-fix.patch
docs-mm-damon-move-monitoring-target-regions-setup-detail-from-the-usage-to-the-design-document.patch
docs-admin-guide-mm-damon-usage-fix-wrong-quotas-diabling-condition.patch
mm-damon-core-set-damos_quota-esz-as-public-field-and-document.patch
mm-damon-sysfs-schemes-implement-quota-effective_bytes-file.patch
mm-damon-sysfs-implement-a-kdamond-command-for-updating-schemes-effective-quotas.patch
docs-abi-damon-document-effective_bytes-sysfs-file.patch
docs-admin-guide-mm-damon-usage-document-effective_bytes-file.patch
mm-damon-move-comments-and-fields-for-damos-quota-prioritization-to-the-end.patch
mm-damon-core-split-out-quota-goal-related-fields-to-a-struct.patch
mm-damon-core-add-multiple-goals-per-damos_quota-and-helpers-for-those.patch
mm-damon-sysfs-use-only-quota-goals.patch
mm-damon-core-remove-goal-field-of-damos_quota.patch
mm-damon-core-let-goal-specified-with-only-target-and-current-values.patch
mm-damon-core-support-multiple-metrics-for-quota-goal.patch
mm-damon-core-implement-psi-metric-damos-quota-goal.patch
mm-damon-sysfs-schemes-support-psi-based-quota-auto-tune.patch
docs-mm-damon-design-document-quota-goal-self-tuning.patch
docs-abi-damon-document-quota-goal-metric-file.patch
docs-admin-guide-mm-damon-usage-document-quota-goal-metric-file.patch
docs-admin-guide-mm-damon-usage-document-quota-goal-metric-file-fix.patch
mm-damon-reclaim-implement-user-feedback-driven-quota-auto-tuning.patch
mm-damon-reclaim-implement-memory-psi-driven-quota-self-tuning.patch
docs-admin-guide-mm-damon-reclaim-document-auto-tuning-parameters.patch