From: Jonathan Cameron <jic23@kernel.org>
To: gregkh@linuxfoundation.org, linux-iio@vger.kernel.org
Subject: Re: [PULL] IIO: First set of new device support, features and cleanup for 6.9
Date: Thu, 22 Feb 2024 19:13:31 +0000 [thread overview]
Message-ID: <20240222191331.75b32286@jic23-huawei> (raw)
In-Reply-To: <20240222190623.44f36707@jic23-huawei>
On Thu, 22 Feb 2024 19:06:23 +0000
Jonathan Cameron <jic23@kernel.org> wrote:
> The following changes since commit 6613476e225e090cc9aad49be7fa504e290dd33d:
>
> Linux 6.8-rc1 (2024-01-21 14:11:32 -0800)
>
> are available in the Git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-6.9a
>
> for you to fetch changes up to 3cc5ebd3a2d6247aeba81873d6b040d5d87f7db1:
>
> iio: imu: bmi323: Add ACPI Match Table (2024-02-19 19:34:44 +0000)
>
Hi Greg,
There is a small conflict in here due to racing with a fix that went
through the dt tree.
Stephen has been carrying a fix up in linux-next which resolves it as expected.
https://lore.kernel.org/linux-next/20240219143945.1460f25f@canb.auug.org.au/
Thanks,
Jonathan
> ----------------------------------------------------------------
> IIO: 1st set of new device support, features and cleanup for 6.9
>
> IIO Backend support
> ===================
>
> New approach from Nuno Sa to the problem of reuse of drivers with
> IIO devices that are actually the combination of a highspeed chip
> and an FPGA core handling the data capture and flows. It will hopefully
> also apply to some other split designs. The ad9467 and axi-adi drivers
> are converted over to this framework.
>
> New device support
> ==================
>
> adi,admfm2000
> - New driver for this dual microwave down converter.
> ams,as73211
> - Add support for as7331 UV sensor.
> richtek,rtq6056
> - Add support for related parts RTQ6053 and RTQ6059
> st,lsm6dsx
> - Add ASM330LHHXG1 accelerometer and gyro support (mainly IDs)
> ti,ads1298
> - New driver for this medical ADC.
>
> Features
> ========
>
> tests
> - Unit tests for the gain-time-scale helper library.
> bosch,bmi088
> - I2C support.
> bosh,bmi160
> - Add 10EC5280 ACPI ID. Used in a number of devices that won't get fixed.
> The ID is actually a PCI ID belonging to realtech. No response was received
> to earlier attempts to notify them of this.
> The manufacturers of some devices have replied to say they will not fix
> this incorrect ID. Add the ID and hope it isn't a problem.
> bosch,bmi323
> - Add BOSC0200 ACPI ID. Note this is a duplicate of one in the bmc150
> driver (it appears these parts share a windows driver).
> Both drivers perform an ID check that is safe on the other part before
> successfully probing.
> hid-sensors-als
> - Add color temperature and chromaticity support. Note this is a replacement
> for the series reverted in 6.8 that correctly handles all the potential
> channel combinations.
> honeywell,hsc030pa
> - Triggered buffer support (after driver cleanup).
> honeywell,mprls00025pa
> - Improved error handling.
> - New DT binding to allow use of part number triplet as provided in data sheet
> to specify equivalent of most of the binding more efficiently.
> - SPI support.
> memsic,mxc4005
> - ACPI ID MDA6655 as seen in the Chuwi Minibook X 2023
> ti,hdc3020
> - Add threshold event support (after some driver cleanup)
> veml,vcnl4000
> - Switch to high resolution proximity measurement.
>
> Cleanup
> =======
> Various minor typo fixes and better use of defines etc.
>
> Treewide
> - Stop using ACPI_PTR(). The savings in space are small and not worth
> the complexity of __maybe_unused of ifdef guards. To avoid use in
> new IIO drivers based on copy and paste, clean it out.
> - cleanup.h based handling of iio_device_claim_direct_mode()/
> iio_device_release_direct_mode() using scope_cond_guard().
> In many drivers this is combined with other automated cleanup
> to give maximum simplifications.
> An initial set of drivers are converted over to this infrastructure.
>
> Tools
> - Use rewinddir() instead of seekdir() to return to start of file.
>
> core
> - Make iio_bus_type constant.
>
> adi,ad16475
> - Use irq_get_trigger_type() instead of opencoding.
> adi,ad16480
> - Use irq_get_trigger_type() instead of opencoding.
> adi,ad-sigma-delta
> - Avoid overwriting IRQ flags if provided by firmware.
> ams,as73211
> - Use IIO_VAL_FRACTIONAL for scales to simplify the code and potentially
> improve accuracy.
> gts-library
> - Use a div64_u64() instead of a loop to do a division.
> honeywell,mprls00025pa
> - Clean up dt-binding doc.
> - Drop defaults when DT binding not providing values. Very unlikely
> these were useful given they were wrong for vast majority of supported
> devices.
> - Whitespace cleanup
> miramems,da280
> - Use i2c_get_match_data() to replace hand rolled ACPI matching code.
> semtech,sx9324
> - Avoid unnecessary copying of property strings.
> st,lsm6dsx
> - Improve docs, particularly wrt to making addition of new device
> support less noisy.
> st,lsm9ds0
> - Use dev_err_probe() in all probe() error handling.
> - Improved header includes.
> - Tidy up termination of ID tables.
> ti,ads1014
> - Correct upper bound on PGA (wrong value had no actual impact)
> ti,afe4403/4404
> - devm_ useage to simplify error handling in probe() and allow() remove to
> be dropped.
> voltage-divider
> - Add dt-binding for io-channel-cells to allow such a device to be both
> an IIO consumer and IIO producer at the same time.
>
> ----------------------------------------------------------------
> Amit Dhingra (1):
> MAINTAINERS: correct file entry for AD7091R
>
> Andrew Davis (4):
> iio: health: afe4403: Use devm action helper for regulator disable
> iio: health: afe4403: Use devm IIO helpers
> iio: health: afe4404: Use devm action helper for regulator disable
> iio: health: afe4404: Use devm IIO helpers
>
> Basavaraj Natikar (2):
> iio: hid-sensor-als: Add light color temperature support
> iio: hid-sensor-als: Add light chromaticity support
>
> ChiYuan Huang (2):
> dt-bindings: iio: adc: rtq6056: add support for the whole RTQ6056 family
> iio: adc: rtq6056: Add support for the whole RTQ6056 family
>
> Colin Ian King (1):
> iio: invensense: remove redundant initialization of variable period
>
> David Lechner (1):
> iio: core: use INDIO_ALL_BUFFER_MODES in iio_buffer_enabled()
>
> Dimitri Fedrau (3):
> iio: humidity: hdc3020: switch to 16bit register defines
> dt-bindings: iio: humidity: hdc3020: add interrupt bindings in example
> iio: humidity: hdc3020: add threshold events support
>
> Hans de Goede (1):
> iio: accel: da280: Simplify id-matching
>
> Javier Carrasco (3):
> iio: light: as73211: use IIO_VAL_FRACTIONAL for intensity scales
> dt-bindings: iio: light: as73211: add support for as7331
> iio: light: as73211: add support for as7331
>
> Jesus Gonzalez (1):
> Add 10EC5280 to bmi160_i2c ACPI IDs to allow binding on some devices
>
> Jonathan Cameron (34):
> iio: accel: da280: Stop using ACPI_PTR()
> iio: accel: kxcjk-1013: Move acpi_device_id table under ifdef CONFIG_ACPI
> iio: accel: mma9551: Drop ACPI_PTR() usage
> iio: accel: mma9553: Drop ACPI_PTR() usage
> iio: accel: mxc4005: Drop ACPI_PTR() usage
> iio: accel: mxc6255: Drop ACPI_PTR() usage
> iio: accel: stk8ba50: Drop ACPI_PTR() usage
> iio: accel: bmc150: Drop ACPI_PTR()
> iio: gyro: bmg160: Drop ACPI_PTR() usage
> iio: humidity: hts221: Drop ACPI_PTR() usage
> iio: imu: fxos8700: Drop ACPI_PTR() usage
> iio: imu: kmx61: Drop ACPI_PTR() usage
> iio: light: jsa1212: Drop ACPI_PTR() usage
> iio: light: ltr501: Drop ACPI_PTR() usage
> iio: light: rpr0521: Drop ACPI_PTR() usage
> iio: light: stk3310: Drop ACPI_PTR() usage
> iio: light: us5182d: Drop ACPI_PTR() usage
> iio: magnetometer: bmc150: Drop ACPI_PTR() usage
> iio: magnetometer: mmc35240: Drop ACPI_PTR() usage
> iio: potentiometer: max5487: Drop ACPI_PTR() usage
> iio: st_sensors: drop ACPI_PTR() and CONFIG_ACPI guards
> iio: pressure: hp206c: drop ACPI_PTR() and CONFIG_ACPI guards
> iio: light: max44000: drop ACPI_PTR() and CONFIG_ACPI guards
> iio: adc: ti-adc109s102: drop ACPI_PTR() and CONFIG_ACPI guards
> iio: locking: introduce __cleanup() based direct mode claiming infrastructure
> iio: dummy: Use automatic lock and direct mode cleanup.
> iio: accel: adxl367: Use automated cleanup for locks and iio direct mode.
> iio: imu: bmi323: Use cleanup handling for iio_device_claim_direct_mode()
> iio: adc: max1363: Use automatic cleanup for locks and iio mode claiming.
> iio: proximity: sx9360: Use automated cleanup for locks and IIO mode claiming.
> iio: proximity: sx9324: Use automated cleanup for locks and IIO mode claiming.
> iio: proximity: sx9310: Use automated cleanup for locks and IIO mode claiming.
> iio: adc: ad4130: Use automatic cleanup of locks and direct mode.
> iio: adc: ad7091r-base: Use auto cleanup of locks.
>
> Jonathan LoBue (2):
> iio: accel: bmc150: Document duplicate ACPI entries with bmi323 driver
> iio: imu: bmi323: Add ACPI Match Table
>
> Jun Yan (1):
> iio: accel: bmi088: add i2c support for bmi088 accel driver
>
> Justin Stitt (1):
> iio: sx9324: avoid copying property strings
>
> Kim Seer Paller (2):
> dt-bindings: iio: frequency: add admfm2000
> iio: frequency: admfm2000: New driver
>
> Lorenzo Bianconi (3):
> iio: imu: st_lsm6dsx: improve kernel docs and comments
> iio: imu: st_lsm6dsx: add support to ASM330LHHXG1
> dt-bindings: iio: imu: st_lsm6dsx: add asm330lhhxg1
>
> Matti Vaittinen (3):
> iio: test: test gain-time-scale helpers
> MAINTAINERS: add IIO GTS tests
> iio: gts-helper: Fix division loop
>
> Mike Looijmans (2):
> dt-bindings: iio: adc: ti-ads1298: Add bindings
> iio: adc: ti-ads1298: Add driver
>
> Mohammed Billoo (1):
> iio: adc: ti-ads1015: Use correct pga upper bound
>
> Mårten Lindahl (1):
> iio: light: vcnl4000: Set ps high definition for 4040/4200
>
> Naresh Solanki (1):
> dt-bindings: iio: afe: voltage-divider: Add io-channel-cells
>
> Nikita Mikhailevich (1):
> iio: accel: mxc4005: new ACPI ID for the MXC6655 accelerometer
>
> Nuno Sa (10):
> iio: buffer-dmaengine: make use of the 'struct device *' argument
> iio: imu: adis16475: make use of irq_get_trigger_type()
> iio: imu: adis16480: make use of irq_get_trigger_type()
> iio: adc: ad_sigma_delta: allow overwriting the IRQ flags
> dt-bindings: adc: ad9467: add new io-backend property
> dt-bindings: adc: axi-adc: update bindings for backend framework
> iio: buffer-dmaengine: export buffer alloc and free functions
> iio: add the IIO backend framework
> iio: adc: ad9467: convert to backend framework
> iio: adc: adi-axi-adc: move to backend framework
>
> Olivier Moysan (1):
> of: property: add device link support for io-backends
>
> Petre Rodan (17):
> dt-bindings: iio: pressure: honeywell,mprls0025pa.yaml improvements
> dt-bindings: iio: pressure: honeywell,mprls0025pa.yaml add pressure-triplet
> dt-bindings: iio: pressure: honeywell,mprls0025pa.yaml add spi bus
> iio: pressure: mprls0025pa fix off-by-one enum
> iio: pressure: mprls0025pa improve driver error resilience
> iio: pressure: mprls0025pa remove defaults
> iio: pressure: mprls0025pa whitespace cleanup
> iio: pressure: mprls0025pa refactor to split core and i2c parts.
> iio: pressure: mprls0025pa add triplet property
> iio: pressure: mprls0025pa add SPI driver
> tools: iio: replace seekdir() in iio_generic_buffer
> dt-bindings: iio: pressure: honeywell,hsc030pa.yaml add spi props
> iio: pressure: hsc030pa: use signed type to hold div_64() result
> iio: pressure: hsc030pa: include cleanup
> iio: pressure: hsc030pa: update datasheet URLs
> iio: pressure: hsc030pa add mandatory delay
> iio: pressure: hsc030pa add triggered buffer
>
> Randy Dunlap (1):
> iio: dummy_evgen: remove Excess kernel-doc comments
>
> Ricardo B. Marliere (1):
> iio: core: make iio_bus_type const
>
> Srinivas Pandruvada (2):
> iio: hid-sensor-als: Assign channels dynamically
> iio: hid-sensor-als: Remove hardcoding of values for enums
>
> andy.shevchenko@gmail.com (3):
> iio: st_sensors: lsm9ds0: Use dev_err_probe() everywhere
> iio: st_sensors: lsm9ds0: Don't use "proxy" headers
> iio: st_sensors: lsm9ds0: Use common style for terminator in ID tables
>
> .../devicetree/bindings/iio/adc/adi,ad9467.yaml | 4 +
> .../devicetree/bindings/iio/adc/adi,axi-adc.yaml | 8 +-
> .../bindings/iio/adc/richtek,rtq6056.yaml | 9 +-
> .../devicetree/bindings/iio/adc/ti,ads1298.yaml | 80 +++
> .../bindings/iio/afe/voltage-divider.yaml | 11 +
> .../bindings/iio/frequency/adi,admfm2000.yaml | 127 ++++
> .../bindings/iio/humidity/ti,hdc3020.yaml | 3 +
> .../devicetree/bindings/iio/imu/st,lsm6dsx.yaml | 4 +-
> .../devicetree/bindings/iio/light/ams,as73211.yaml | 7 +-
> .../bindings/iio/pressure/honeywell,hsc030pa.yaml | 3 +
> .../iio/pressure/honeywell,mprls0025pa.yaml | 98 ++-
> MAINTAINERS | 22 +-
> drivers/iio/Kconfig | 9 +
> drivers/iio/Makefile | 1 +
> drivers/iio/accel/Kconfig | 8 +-
> drivers/iio/accel/Makefile | 1 +
> drivers/iio/accel/adxl367.c | 297 ++++----
> drivers/iio/accel/bmc150-accel-i2c.c | 15 +-
> drivers/iio/accel/bmc150-accel-spi.c | 3 +-
> drivers/iio/accel/bmi088-accel-i2c.c | 70 ++
> drivers/iio/accel/da280.c | 66 +-
> drivers/iio/accel/kxcjk-1013.c | 33 +-
> drivers/iio/accel/mma9551.c | 4 +-
> drivers/iio/accel/mma9553.c | 4 +-
> drivers/iio/accel/mxc4005.c | 5 +-
> drivers/iio/accel/mxc6255.c | 4 +-
> drivers/iio/accel/st_accel_i2c.c | 5 +-
> drivers/iio/accel/stk8ba50.c | 4 +-
> drivers/iio/adc/Kconfig | 15 +-
> drivers/iio/adc/Makefile | 1 +
> drivers/iio/adc/ad4130.c | 131 ++--
> drivers/iio/adc/ad7091r-base.c | 25 +-
> drivers/iio/adc/ad9467.c | 267 ++++---
> drivers/iio/adc/ad_sigma_delta.c | 7 +-
> drivers/iio/adc/adi-axi-adc.c | 385 +++--------
> drivers/iio/adc/max1363.c | 171 +++--
> drivers/iio/adc/rtq6056.c | 275 +++++++-
> drivers/iio/adc/ti-adc108s102.c | 4 +-
> drivers/iio/adc/ti-ads1015.c | 2 +-
> drivers/iio/adc/ti-ads1298.c | 769 +++++++++++++++++++++
> drivers/iio/buffer/industrialio-buffer-dmaengine.c | 11 +-
> .../iio/common/inv_sensors/inv_sensors_timestamp.c | 2 +-
> drivers/iio/dummy/iio_dummy_evgen.c | 2 -
> drivers/iio/dummy/iio_simple_dummy.c | 185 +++--
> drivers/iio/frequency/Kconfig | 10 +
> drivers/iio/frequency/Makefile | 1 +
> drivers/iio/frequency/admfm2000.c | 282 ++++++++
> drivers/iio/gyro/bmg160_i2c.c | 4 +-
> drivers/iio/health/afe4403.c | 65 +-
> drivers/iio/health/afe4404.c | 65 +-
> drivers/iio/humidity/hdc3020.c | 445 ++++++++----
> drivers/iio/humidity/hts221_i2c.c | 4 +-
> drivers/iio/imu/adis16475.c | 8 +-
> drivers/iio/imu/adis16480.c | 9 +-
> drivers/iio/imu/bmi160/bmi160_i2c.c | 9 +
> drivers/iio/imu/bmi323/bmi323_core.c | 78 +--
> drivers/iio/imu/bmi323/bmi323_i2c.c | 21 +
> drivers/iio/imu/fxos8700_i2c.c | 3 +-
> drivers/iio/imu/fxos8700_spi.c | 3 +-
> drivers/iio/imu/kmx61.c | 2 +-
> drivers/iio/imu/st_lsm6dsx/Kconfig | 31 +-
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 +
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 28 +-
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 33 +-
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 +
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 +
> drivers/iio/imu/st_lsm9ds0/st_lsm9ds0.h | 5 +-
> drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_core.c | 21 +-
> drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c | 6 +-
> drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c | 4 +-
> drivers/iio/industrialio-backend.c | 418 +++++++++++
> drivers/iio/industrialio-core.c | 6 +-
> drivers/iio/industrialio-gts-helper.c | 15 +-
> drivers/iio/light/Kconfig | 5 +-
> drivers/iio/light/as73211.c | 142 +++-
> drivers/iio/light/hid-sensor-als.c | 122 +++-
> drivers/iio/light/jsa1212.c | 4 +-
> drivers/iio/light/ltr501.c | 3 +-
> drivers/iio/light/max44000.c | 6 +-
> drivers/iio/light/rpr0521.c | 4 +-
> drivers/iio/light/stk3310.c | 4 +-
> drivers/iio/light/us5182d.c | 4 +-
> drivers/iio/light/vcnl4000.c | 36 +-
> drivers/iio/magnetometer/bmc150_magn_i2c.c | 3 +-
> drivers/iio/magnetometer/bmc150_magn_spi.c | 3 +-
> drivers/iio/magnetometer/mmc35240.c | 4 +-
> drivers/iio/potentiometer/max5487.c | 4 +-
> drivers/iio/pressure/Kconfig | 16 +-
> drivers/iio/pressure/Makefile | 2 +
> drivers/iio/pressure/hp206c.c | 6 +-
> drivers/iio/pressure/hsc030pa.c | 49 +-
> drivers/iio/pressure/hsc030pa.h | 7 +
> drivers/iio/pressure/hsc030pa_i2c.c | 9 +-
> drivers/iio/pressure/hsc030pa_spi.c | 7 +-
> drivers/iio/pressure/mprls0025pa.c | 313 ++++-----
> drivers/iio/pressure/mprls0025pa.h | 102 +++
> drivers/iio/pressure/mprls0025pa_i2c.c | 100 +++
> drivers/iio/pressure/mprls0025pa_spi.c | 92 +++
> drivers/iio/pressure/st_pressure_i2c.c | 5 +-
> drivers/iio/proximity/sx9310.c | 114 ++-
> drivers/iio/proximity/sx9324.c | 178 +++--
> drivers/iio/proximity/sx9360.c | 115 ++-
> drivers/iio/test/Kconfig | 14 +
> drivers/iio/test/Makefile | 1 +
> drivers/iio/test/iio-test-gts.c | 513 ++++++++++++++
> drivers/of/property.c | 2 +
> include/linux/hid-sensor-ids.h | 4 +
> include/linux/iio/adc/adi-axi-adc.h | 68 --
> include/linux/iio/backend.h | 72 ++
> include/linux/iio/buffer-dmaengine.h | 3 +
> include/linux/iio/iio.h | 30 +-
> tools/iio/iio_utils.c | 2 +-
> 112 files changed, 5038 insertions(+), 1875 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,ads1298.yaml
> create mode 100644 Documentation/devicetree/bindings/iio/frequency/adi,admfm2000.yaml
> create mode 100644 drivers/iio/accel/bmi088-accel-i2c.c
> create mode 100644 drivers/iio/adc/ti-ads1298.c
> create mode 100644 drivers/iio/frequency/admfm2000.c
> create mode 100644 drivers/iio/industrialio-backend.c
> create mode 100644 drivers/iio/pressure/mprls0025pa.h
> create mode 100644 drivers/iio/pressure/mprls0025pa_i2c.c
> create mode 100644 drivers/iio/pressure/mprls0025pa_spi.c
> create mode 100644 drivers/iio/test/iio-test-gts.c
> delete mode 100644 include/linux/iio/adc/adi-axi-adc.h
> create mode 100644 include/linux/iio/backend.h
>
next prev parent reply other threads:[~2024-02-22 19:13 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-22 19:06 [PULL] IIO: First set of new device support, features and cleanup for 6.9 Jonathan Cameron
2024-02-22 19:13 ` Jonathan Cameron [this message]
2024-02-25 13:12 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240222191331.75b32286@jic23-huawei \
--to=jic23@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.