From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Baochen Qiang <quic_bqiang@quicinc.com>
Cc: ath11k@lists.infradead.org, mhi@lists.linux.dev,
linux-wireless@vger.kernel.org, linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH 2/3] net: qrtr: support suspend/hibernation
Date: Mon, 26 Feb 2024 17:50:55 +0530 [thread overview]
Message-ID: <20240226122055.GE8422@thinkpad> (raw)
In-Reply-To: <20240221030026.10553-3-quic_bqiang@quicinc.com>
On Wed, Feb 21, 2024 at 11:00:25AM +0800, Baochen Qiang wrote:
> MHI devices may not be destroyed during suspend/hibernation, so need
> to unprepare/prepare MHI channels throughout the transition.
>
Again, below content should go to the comment section, not in the commit
message.
Please add only relevant content in the commit message.
- Mani
> The RFC version adds new API to MHI stack with which an MHI controller
> driver can do unprepare/prepare directly by itself, see
>
> https://patchwork.kernel.org/project/linux-wireless/patch/20231127162022.518834-3-kvalo@kernel.org/
>
> Although it works well Mani pointed out that the design is not good
> because MHI channels are managed by MHI client driver thus should not
> be touched by others. See the discussion
>
> https://lore.kernel.org/mhi/20231127162022.518834-1-kvalo@kernel.org/
>
> This version changes to add suspend/resume callbacks to achieve the
> same purpose. The suspend callback is called in the late suspend stage,
> this means MHI channels are still alive at suspend stage, and that makes
> it possible for an MHI controller driver to communicate with others over
> those channels at suspend stage. While the resume callback is called in
> the early resume stage, for a similar reason.
>
> Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
>
> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
> ---
> net/qrtr/mhi.c | 29 +++++++++++++++++++++++++++++
> 1 file changed, 29 insertions(+)
>
> diff --git a/net/qrtr/mhi.c b/net/qrtr/mhi.c
> index 9ced13c0627a..b54a6c2113e9 100644
> --- a/net/qrtr/mhi.c
> +++ b/net/qrtr/mhi.c
> @@ -118,6 +118,32 @@ static const struct mhi_device_id qcom_mhi_qrtr_id_table[] = {
> };
> MODULE_DEVICE_TABLE(mhi, qcom_mhi_qrtr_id_table);
>
> +static int qcom_mhi_qrtr_pm_suspend_late(struct device *dev)
> +{
> + struct mhi_device *mhi_dev = container_of(dev, struct mhi_device, dev);
> +
> + mhi_unprepare_from_transfer(mhi_dev);
> +
> + return 0;
> +}
> +
> +static int qcom_mhi_qrtr_pm_resume_early(struct device *dev)
> +{
> + struct mhi_device *mhi_dev = container_of(dev, struct mhi_device, dev);
> + int rc;
> +
> + rc = mhi_prepare_for_transfer_autoqueue(mhi_dev);
> + if (rc)
> + dev_err(dev, "failed to prepare for autoqueue transfer %d\n", rc);
> +
> + return rc;
> +}
> +
> +static const struct dev_pm_ops __maybe_unused qcom_mhi_qrtr_pm_ops = {
> + SET_LATE_SYSTEM_SLEEP_PM_OPS(qcom_mhi_qrtr_pm_suspend_late,
> + qcom_mhi_qrtr_pm_resume_early)
> +};
> +
> static struct mhi_driver qcom_mhi_qrtr_driver = {
> .probe = qcom_mhi_qrtr_probe,
> .remove = qcom_mhi_qrtr_remove,
> @@ -126,6 +152,9 @@ static struct mhi_driver qcom_mhi_qrtr_driver = {
> .id_table = qcom_mhi_qrtr_id_table,
> .driver = {
> .name = "qcom_mhi_qrtr",
> +#ifdef CONFIG_PM
> + .pm = &qcom_mhi_qrtr_pm_ops,
> +#endif
> },
> };
>
> --
> 2.25.1
>
>
--
மணிவண்ணன் சதாசிவம்
next prev parent reply other threads:[~2024-02-26 12:21 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-21 3:00 [PATCH 0/3] wifi: ath11k: hibernation support Baochen Qiang
2024-02-21 3:00 ` [PATCH 1/3] bus: mhi: host: add mhi_power_down_no_destroy() Baochen Qiang
2024-02-21 17:22 ` Jeff Johnson
2024-02-26 12:15 ` Manivannan Sadhasivam
2024-02-27 6:29 ` Baochen Qiang
2024-02-21 3:00 ` [PATCH 2/3] net: qrtr: support suspend/hibernation Baochen Qiang
2024-02-21 18:24 ` Jeff Johnson
2024-02-22 7:48 ` Baochen Qiang
2024-02-26 12:20 ` Manivannan Sadhasivam [this message]
2024-02-21 3:00 ` [PATCH 3/3] wifi: ath11k: support hibernation Baochen Qiang
2024-02-21 18:35 ` Jeff Johnson
2024-02-23 2:30 ` [PATCH 0/3] wifi: ath11k: hibernation support Baochen Qiang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240226122055.GE8422@thinkpad \
--to=manivannan.sadhasivam@linaro.org \
--cc=ath11k@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=mhi@lists.linux.dev \
--cc=quic_bqiang@quicinc.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.