From: Jamin Lin via <qemu-devel@nongnu.org>
To: "Cédric Le Goater" <clg@kaod.org>,
"Peter Maydell" <peter.maydell@linaro.org>,
"Andrew Jeffery" <andrew@codeconstruct.com.au>,
"Joel Stanley" <joel@jms.id.au>,
"Alistair Francis" <alistair@alistair23.me>,
"open list:ASPEED BMCs" <qemu-arm@nongnu.org>,
"open list:All patches CC here" <qemu-devel@nongnu.org>
Cc: <troy_lee@aspeedtech.com>, <jamin_lin@aspeedtech.com>,
<yunlin.tang@aspeedtech.com>
Subject: [PATCH v1 8/8] aspeed: Add an AST2700 eval board
Date: Thu, 29 Feb 2024 16:00:14 +0800 [thread overview]
Message-ID: <20240229080014.1235018-9-jamin_lin@aspeedtech.com> (raw)
In-Reply-To: <20240229080014.1235018-1-jamin_lin@aspeedtech.com>
AST2700 CPU is ARM Cortex-A35 which is 64 bits.
Add TARGET_AARCH64 to build this machine.
According to the design of ast2700, it has a bootmcu(riscv-32) which
is used for executing SPL.
Then, CPUs(cortex-a35) execute u-boot, kernel and rofs.
Currently, qemu not support emulate two CPU architectures
at the same machine. Therefore, qemu will only support
to emulate CPU(cortex-a35) side for ast2700
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
hw/arm/aspeed.c | 32 ++++++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index 8854581ca8..4544026d14 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -178,6 +178,12 @@ struct AspeedMachineState {
#define AST2600_EVB_HW_STRAP1 0x000000C0
#define AST2600_EVB_HW_STRAP2 0x00000003
+#ifdef TARGET_AARCH64
+/* AST2700 evb hardware value */
+#define AST2700_EVB_HW_STRAP1 0x000000C0
+#define AST2700_EVB_HW_STRAP2 0x00000003
+#endif
+
/* Tacoma hardware value */
#define TACOMA_BMC_HW_STRAP1 0x00000000
#define TACOMA_BMC_HW_STRAP2 0x00000040
@@ -1588,6 +1594,26 @@ static void aspeed_minibmc_machine_ast1030_evb_class_init(ObjectClass *oc,
aspeed_machine_class_init_cpus_defaults(mc);
}
+#ifdef TARGET_AARCH64
+static void aspeed_machine_ast2700_evb_class_init(ObjectClass *oc, void *data)
+{
+ MachineClass *mc = MACHINE_CLASS(oc);
+ AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
+
+ mc->desc = "Aspeed AST2700 EVB (Cortex-A35)";
+ amc->soc_name = "ast2700-a0";
+ amc->hw_strap1 = AST2700_EVB_HW_STRAP1;
+ amc->hw_strap2 = AST2700_EVB_HW_STRAP2;
+ amc->fmc_model = "w25q01jvq";
+ amc->spi_model = "w25q512jv";
+ amc->num_cs = 2;
+ amc->macs_mask = ASPEED_MAC0_ON | ASPEED_MAC1_ON | ASPEED_MAC2_ON;
+ amc->uart_default = ASPEED_DEV_UART12;
+ mc->default_ram_size = 1 * GiB;
+ aspeed_machine_class_init_cpus_defaults(mc);
+}
+#endif
+
static void aspeed_machine_qcom_dc_scm_v1_class_init(ObjectClass *oc,
void *data)
{
@@ -1711,6 +1737,12 @@ static const TypeInfo aspeed_machine_types[] = {
.name = MACHINE_TYPE_NAME("ast1030-evb"),
.parent = TYPE_ASPEED_MACHINE,
.class_init = aspeed_minibmc_machine_ast1030_evb_class_init,
+#ifdef TARGET_AARCH64
+ }, {
+ .name = MACHINE_TYPE_NAME("ast2700-evb"),
+ .parent = TYPE_ASPEED_MACHINE,
+ .class_init = aspeed_machine_ast2700_evb_class_init,
+#endif
}, {
.name = TYPE_ASPEED_MACHINE,
.parent = TYPE_MACHINE,
--
2.25.1
next prev parent reply other threads:[~2024-02-29 8:01 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-29 8:00 [PATCH v1 0/8] Add AST2700 support Jamin Lin via
2024-02-29 8:00 ` Jamin Lin via
2024-02-29 8:00 ` [PATCH v1 2/8] aspeed/sli: " Jamin Lin via
2024-02-29 8:00 ` Jamin Lin via
2024-02-29 8:00 ` [PATCH v1 5/8] aspeed/scu: " Jamin Lin via
2024-02-29 8:00 ` [PATCH v1 6/8] aspeed/intc: " Jamin Lin via
2024-02-29 8:00 ` Jamin Lin via
2024-02-29 8:00 ` Jamin Lin via [this message]
[not found] <20240229074234.976164-1-jamin_lin@aspeedtech.com>
[not found] ` <20240229074234.976164-9-jamin_lin@aspeedtech.com>
2024-02-29 7:53 ` [PATCH v1 8/8] aspeed: Add an AST2700 eval board Jamin Lin
2024-02-29 7:58 ` Jamin Lin
2024-02-29 8:32 ` Cédric Le Goater
2024-03-04 9:56 ` Jamin Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240229080014.1235018-9-jamin_lin@aspeedtech.com \
--to=qemu-devel@nongnu.org \
--cc=alistair@alistair23.me \
--cc=andrew@codeconstruct.com.au \
--cc=clg@kaod.org \
--cc=jamin_lin@aspeedtech.com \
--cc=joel@jms.id.au \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=troy_lee@aspeedtech.com \
--cc=yunlin.tang@aspeedtech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.