Re: [PATCH v2 net-next 2/2] net: phy: air_en8811h: Add the Airoha EN8811H PHY driver

[Simon Horman <horms@kernel.org>]

On Sat, Mar 02, 2024 at 07:38:35PM +0100, Eric Woudstra wrote:

...

> +static int air_led_init(struct phy_device *phydev, u8 index, u8 state, u8 pol)
> +{
> +	int val;
> +	int err;
> +
> +	if (index >= EN8811H_LED_COUNT)
> +		return -EINVAL;

Hi Eric,

I think val needs to be initialised before it is used below.

Flagged by clang-17 W=1 build.

> +
> +	if (state == AIR_LED_ENABLE)
> +		val |= AIR_PHY_LED_ON_ENABLE;
> +	else
> +		val &= ~AIR_PHY_LED_ON_ENABLE;
> +
> +	if (pol == AIR_ACTIVE_HIGH)
> +		val |= AIR_PHY_LED_ON_POLARITY;
> +	else
> +		val &= ~AIR_PHY_LED_ON_POLARITY;
> +
> +	err = phy_modify_mmd(phydev, MDIO_MMD_VEND2, AIR_PHY_LED_ON(index),
> +			     AIR_PHY_LED_ON_ENABLE |
> +			     AIR_PHY_LED_ON_POLARITY, val);
> +
> +	if (err < 0)
> +		return err;
> +
> +	return 0;
> +}

...