[PATCH v3 2/5] phycore_imx8mp: Move default bootcmd to board env

[Leonard Anderweit <l.anderweit@phytec.de>]

Move the default bootcmd from the defconfig to the board environment.
No change in functionality.

Signed-off-by: Leonard Anderweit <l.anderweit@phytec.de>
Tested-by: Teresa Remmet <t.remmet@phytec.de>
---
 board/phytec/phycore_imx8mp/phycore_imx8mp.env | 12 ++++++++++++
 configs/phycore-imx8mp_defconfig               |  2 --
 2 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/board/phytec/phycore_imx8mp/phycore_imx8mp.env b/board/phytec/phycore_imx8mp/phycore_imx8mp.env
index 32513e70fec2..dc9ad0fe9d15 100644
--- a/board/phytec/phycore_imx8mp/phycore_imx8mp.env
+++ b/board/phytec/phycore_imx8mp/phycore_imx8mp.env
@@ -1,3 +1,15 @@
+bootcmd=
+	if test ${dofastboot} = 1; then
+		fastboot 0;
+	fi;
+	mmc dev ${mmcdev};
+	if mmc rescan; then
+		if run loadimage; then
+			run mmcboot;
+		else
+			run netboot;
+		fi;
+	fi;
 console=ttymxc0,115200
 dofastboot=0
 emmc_dev=2
diff --git a/configs/phycore-imx8mp_defconfig b/configs/phycore-imx8mp_defconfig
index b3a7bbd79bb6..fd492eba3c10 100644
--- a/configs/phycore-imx8mp_defconfig
+++ b/configs/phycore-imx8mp_defconfig
@@ -25,8 +25,6 @@ CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_OF_SYSTEM_SETUP=y
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="if test ${dofastboot} = 1; then fastboot 0; fi; mmc dev ${mmcdev}; if mmc rescan; then if run loadimage; then run mmcboot; else run netboot; fi; fi;"
 CONFIG_DEFAULT_FDT_FILE="oftree"
 CONFIG_SYS_CBSIZE=2048
 CONFIG_SYS_PBSIZE=2074
-- 
2.25.1