From: Sven Schnelle <svens@stackframe.org>
To: Richard Henderson <richard.henderson@linaro.org>
Cc: qemu-devel@nongnu.org, Helge Deller <deller@gmx.de>,
Sven Schnelle <svens@stackframe.org>
Subject: [PATCH v2 3/6] target/hppa: fix access_id check
Date: Tue, 19 Mar 2024 17:19:18 +0100 [thread overview]
Message-ID: <20240319161921.487080-4-svens@stackframe.org> (raw)
In-Reply-To: <20240319161921.487080-1-svens@stackframe.org>
PA2.0 provides 8 instead of 4 PID registers.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
---
target/hppa/mem_helper.c | 59 +++++++++++++++++++++++++++++++++-------
1 file changed, 49 insertions(+), 10 deletions(-)
diff --git a/target/hppa/mem_helper.c b/target/hppa/mem_helper.c
index 80f51e753f..f89ba91b20 100644
--- a/target/hppa/mem_helper.c
+++ b/target/hppa/mem_helper.c
@@ -152,6 +152,49 @@ static HPPATLBEntry *hppa_alloc_tlb_ent(CPUHPPAState *env)
return ent;
}
+#define ACCESS_ID_MASK 0xffff
+
+/* Return the set of protections allowed by a PID match. */
+static int match_prot_id_1(uint32_t access_id, uint32_t prot_id)
+{
+ if (((access_id ^ (prot_id >> 1)) & ACCESS_ID_MASK) == 0) {
+ return (prot_id & 1
+ ? PROT_EXEC | PROT_READ
+ : PROT_EXEC | PROT_READ | PROT_WRITE);
+ }
+ return 0;
+}
+
+static int match_prot_id32(CPUHPPAState *env, uint32_t access_id)
+{
+ int r, i;
+
+ for (i = CR_PID1; i <= CR_PID4; ++i) {
+ r = match_prot_id_1(access_id, env->cr[i]);
+ if (r) {
+ return r;
+ }
+ }
+ return 0;
+}
+
+static int match_prot_id64(CPUHPPAState *env, uint32_t access_id)
+{
+ int r, i;
+
+ for (i = CR_PID1; i <= CR_PID4; ++i) {
+ r = match_prot_id_1(access_id, env->cr[i]);
+ if (r) {
+ return r;
+ }
+ r = match_prot_id_1(access_id, env->cr[i] >> 32);
+ if (r) {
+ return r;
+ }
+ }
+ return 0;
+}
+
int hppa_get_physical_address(CPUHPPAState *env, vaddr addr, int mmu_idx,
int type, hwaddr *pphys, int *pprot,
HPPATLBEntry **tlb_entry)
@@ -226,16 +269,12 @@ int hppa_get_physical_address(CPUHPPAState *env, vaddr addr, int mmu_idx,
/* access_id == 0 means public page and no check is performed */
if (ent->access_id && MMU_IDX_TO_P(mmu_idx)) {
- /* If bits [31:1] match, and bit 0 is set, suppress write. */
- int match = ent->access_id * 2 + 1;
-
- if (match == env->cr[CR_PID1] || match == env->cr[CR_PID2] ||
- match == env->cr[CR_PID3] || match == env->cr[CR_PID4]) {
- prot &= PAGE_READ | PAGE_EXEC;
- if (type == PAGE_WRITE) {
- ret = EXCP_DMPI;
- goto egress;
- }
+ int access_prot = (hppa_is_pa20(env)
+ ? match_prot_id64(env, ent->access_id)
+ : match_prot_id32(env, ent->access_id));
+ if (prot & ~access_prot) {
+ ret = type & PAGE_EXEC ? EXCP_IMP : EXCP_DMPI;
+ goto egress;
}
}
--
2.43.2
next prev parent reply other threads:[~2024-03-19 16:21 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-19 16:19 [PATCH v2 0/6] few fixes for hppa target Sven Schnelle
2024-03-19 16:19 ` [PATCH v2 1/6] target/hppa: ldcw,s uses static shift of 3 Sven Schnelle
2024-03-19 16:19 ` [PATCH v2 2/6] target/hppa: fix shrp for wide mode Sven Schnelle
2024-03-19 16:19 ` Sven Schnelle [this message]
2024-03-19 18:35 ` [PATCH v2 3/6] target/hppa: fix access_id check Richard Henderson
2024-03-19 16:19 ` [PATCH v2 4/6] target/hppa: exit tb on flush cache instructions Sven Schnelle
2024-03-19 16:19 ` [PATCH v2 5/6] target/hppa: mask privilege bits in mfia Sven Schnelle
2024-03-19 16:19 ` [PATCH v2 6/6] target/hppa: fix do_stdby_e() Sven Schnelle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240319161921.487080-4-svens@stackframe.org \
--to=svens@stackframe.org \
--cc=deller@gmx.de \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.