diff for duplicates of <20240326103549.2413515-3-Kelly_Hung@asus.com> diff --git a/a/1.txt b/N1/1.txt index 418f398..c20479e 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -65,7 +65,7 @@ index 000000000..64f4ed07c + stdout-path = "serial4:115200n8"; + }; + -+ memory at 80000000 { ++ memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; @@ -164,7 +164,7 @@ index 000000000..64f4ed07c +&fmc { + status = "okay"; + -+ flash at 0 { ++ flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; @@ -178,7 +178,7 @@ index 000000000..64f4ed07c + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + -+ flash at 0 { ++ flash@0 { + status = "okay"; + label = "bios"; + spi-max-frequency = <50000000>; @@ -204,31 +204,31 @@ index 000000000..64f4ed07c +&i2c4 { + status = "okay"; + -+ temperature-sensor at 48 { ++ temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + -+ temperature-sensor at 49 { ++ temperature-sensor@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + -+ pca9555_4_20: gpio at 20 { ++ pca9555_4_20: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + -+ pca9555_4_22: gpio at 22 { ++ pca9555_4_22: gpio@22 { + compatible = "nxp,pca9555"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + -+ pca9555_4_24: gpio at 24 { ++ pca9555_4_24: gpio@24 { + compatible = "nxp,pca9555"; + reg = <0x24>; + gpio-controller; @@ -239,39 +239,39 @@ index 000000000..64f4ed07c + /*B0 - B7 8*/ "", "", "", "", "", "", "", ""; + }; + -+ pca9555_4_26: gpio at 26 { ++ pca9555_4_26: gpio@26 { + compatible = "nxp,pca9555"; + reg = <0x26>; + gpio-controller; + #gpio-cells = <2>; + }; + -+ i2c-mux at 70 { ++ i2c-mux@70 { + compatible = "nxp,pca9546"; + status = "okay"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + -+ channel_1: i2c at 0 { ++ channel_1: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + -+ channel_2: i2c at 1 { ++ channel_2: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + -+ channel_3: i2c at 2 { ++ channel_3: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + -+ channel_4: i2c at 3 { ++ channel_4: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; @@ -282,26 +282,26 @@ index 000000000..64f4ed07c +&i2c5 { + status = "okay"; + -+ pca9555_5_24: gpio at 24 { ++ pca9555_5_24: gpio@24 { + compatible = "nxp,pca9555"; + reg = <0x24>; + gpio-controller; + #gpio-cells = <2>; + }; + -+ i2c-mux at 70 { ++ i2c-mux@70 { + compatible = "nxp,pca9546"; + status = "okay"; + reg = <0x70 >; + #address-cells = <1>; + #size-cells = <0>; + -+ channel_5: i2c at 0 { ++ channel_5: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + -+ pca9555_5_5_20: gpio at 20 { ++ pca9555_5_5_20: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; @@ -313,33 +313,33 @@ index 000000000..64f4ed07c + "SYS_FAN2", "SYS_FAN1"; + }; + -+ pca9555_5_5_21: gpio at 21 { ++ pca9555_5_5_21: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + -+ power-monitor at 44 { ++ power-monitor@44 { + compatible = "ti,ina219"; + reg = <0x44>; + shunt-resistor = <2>; + }; + }; + -+ channel_6: i2c at 1 { ++ channel_6: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + -+ channel_7: i2c at 2 { ++ channel_7: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + -+ channel_8: i2c at 3 { ++ channel_8: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; @@ -350,14 +350,14 @@ index 000000000..64f4ed07c +&i2c6 { + status = "okay"; + -+ pca9555_6_27: gpio at 27 { ++ pca9555_6_27: gpio@27 { + compatible = "nxp,pca9555"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + }; + -+ pca9555_6_20: gpio at 20 { ++ pca9555_6_20: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; @@ -368,7 +368,7 @@ index 000000000..64f4ed07c + /*B4 12*/ "", "", "", ""; + }; + -+ pca9555_6_21: gpio at 21 { ++ pca9555_6_21: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; @@ -379,7 +379,7 @@ index 000000000..64f4ed07c +&i2c7 { + status = "okay"; + -+ i2c-mux at 70 { ++ i2c-mux@70 { + compatible = "nxp,pca9546"; + status = "okay"; + reg = <0x70>; @@ -387,54 +387,54 @@ index 000000000..64f4ed07c + #size-cells = <0>; + idle-state = <1>; + -+ channel_9: i2c at 0 { ++ channel_9: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + -+ temperature-sensor at 48 { ++ temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + -+ temperature-sensor at 49 { ++ temperature-sensor@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + -+ power-monitor at 40 { ++ power-monitor@40 { + compatible = "ti,ina219"; + reg = <0x40>; + shunt-resistor = <2>; + }; + -+ power-monitor at 41 { ++ power-monitor@41 { + compatible = "ti,ina219"; + reg = <0x41>; + shunt-resistor = <5>; + }; + }; + -+ channel_10: i2c at 1 { ++ channel_10: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + -+ channel_11: i2c at 2 { ++ channel_11: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + -+ channel_12: i2c at 3 { ++ channel_12: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + -+ i2c-mux at 71 { ++ i2c-mux@71 { + compatible = "nxp,pca9546"; + status = "okay"; + reg = <0x71>; @@ -442,25 +442,25 @@ index 000000000..64f4ed07c + #size-cells = <0>; + i2c-mux-idle-disconnect; + -+ channel_13: i2c at 0 { ++ channel_13: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + -+ channel_14: i2c at 1 { ++ channel_14: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + -+ channel_15: i2c at 2 { ++ channel_15: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + -+ channel_16: i2c at 3 { ++ channel_16: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; @@ -471,7 +471,7 @@ index 000000000..64f4ed07c +&i2c8 { + status = "okay"; + -+ i2c-mux at 70 { ++ i2c-mux@70 { + compatible = "nxp,pca9546"; + status = "okay"; + reg = <0x70>; @@ -479,36 +479,36 @@ index 000000000..64f4ed07c + #size-cells = <0>; + i2c-mux-idle-disconnect; + -+ channel_17: i2c at 0 { ++ channel_17: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + -+ channel_18: i2c at 1 { ++ channel_18: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + -+ temperature-sensor at 48 { ++ temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + -+ power-monitor at 41 { ++ power-monitor@41 { + compatible = "ti,ina219"; + reg = <0x41>; + shunt-resistor = <5>; + }; + }; + -+ channel_19: i2c at 2 { ++ channel_19: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + -+ channel_20: i2c at 3 { ++ channel_20: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; @@ -532,12 +532,12 @@ index 000000000..64f4ed07c + status = "okay"; + multi-master; + -+ eeprom at 50 { ++ eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + }; + -+ eeprom at 51 { ++ eeprom@51 { + compatible = "atmel,24c08"; + reg = <0x51>; + }; diff --git a/a/content_digest b/N1/content_digest index 5ec7bc5..222bdd7 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,8 +1,19 @@ "ref\020240326103549.2413515-1-Kelly_Hung@asus.com\0" "From\0Kelly Hung <ppighouse@gmail.com>\0" "Subject\0[PATCH v6 2/2] ARM: dts: aspeed: x4tf: Add dts for asus x4tf project\0" - "Date\0Tue, 26 Mar 2024 10:36:10 -0000\0" - "To\0linux-aspeed@lists.ozlabs.org\0" + "Date\0Tue, 26 Mar 2024 18:35:49 +0800\0" + "To\0robh+dt@kernel.org\0" + "Cc\0devicetree@vger.kernel.org" + conor+dt@kernel.org + linux-aspeed@lists.ozlabs.org + openbmc@lists.ozlabs.org + linux-kernel@vger.kernel.org + Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + Kelly Hung <Kelly_Hung@asus.com> + joel@jms.id.au + krzysztof.kozlowski+dt@linaro.org + Allenyy_Hsu@asus.com + " linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" "Base on aspeed-g6.dtsi and can boot into BMC console.\n" @@ -72,7 +83,7 @@ "+\t\tstdout-path = \"serial4:115200n8\";\n" "+\t};\n" "+\n" - "+\tmemory at 80000000 {\n" + "+\tmemory@80000000 {\n" "+\t\tdevice_type = \"memory\";\n" "+\t\treg = <0x80000000 0x40000000>;\n" "+\t};\n" @@ -171,7 +182,7 @@ "+&fmc {\n" "+\tstatus = \"okay\";\n" "+\n" - "+\tflash at 0 {\n" + "+\tflash@0 {\n" "+\t\tstatus = \"okay\";\n" "+\t\tm25p,fast-read;\n" "+\t\tlabel = \"bmc\";\n" @@ -185,7 +196,7 @@ "+\tpinctrl-names = \"default\";\n" "+\tpinctrl-0 = <&pinctrl_spi1_default>;\n" "+\n" - "+\tflash at 0 {\n" + "+\tflash@0 {\n" "+\t\tstatus = \"okay\";\n" "+\t\tlabel = \"bios\";\n" "+\t\tspi-max-frequency = <50000000>;\n" @@ -211,31 +222,31 @@ "+&i2c4 {\n" "+\tstatus = \"okay\";\n" "+\n" - "+\ttemperature-sensor at 48 {\n" + "+\ttemperature-sensor@48 {\n" "+\t\tcompatible = \"ti,tmp75\";\n" "+\t\treg = <0x48>;\n" "+\t};\n" "+\n" - "+\ttemperature-sensor at 49 {\n" + "+\ttemperature-sensor@49 {\n" "+\t\tcompatible = \"ti,tmp75\";\n" "+\t\treg = <0x49>;\n" "+\t};\n" "+\n" - "+\tpca9555_4_20: gpio at 20 {\n" + "+\tpca9555_4_20: gpio@20 {\n" "+\t\tcompatible = \"nxp,pca9555\";\n" "+\t\treg = <0x20>;\n" "+\t\tgpio-controller;\n" "+\t\t#gpio-cells = <2>;\n" "+\t};\n" "+\n" - "+\tpca9555_4_22: gpio at 22 {\n" + "+\tpca9555_4_22: gpio@22 {\n" "+\t\tcompatible = \"nxp,pca9555\";\n" "+\t\treg = <0x22>;\n" "+\t\tgpio-controller;\n" "+\t\t#gpio-cells = <2>;\n" "+\t};\n" "+\n" - "+\tpca9555_4_24: gpio at 24 {\n" + "+\tpca9555_4_24: gpio@24 {\n" "+\t\tcompatible = \"nxp,pca9555\";\n" "+\t\treg = <0x24>;\n" "+\t\tgpio-controller;\n" @@ -246,39 +257,39 @@ "+\t\t/*B0 - B7 8*/\t\"\", \"\", \"\", \"\", \"\", \"\", \"\", \"\";\n" "+\t};\n" "+\n" - "+\tpca9555_4_26: gpio at 26 {\n" + "+\tpca9555_4_26: gpio@26 {\n" "+\t\tcompatible = \"nxp,pca9555\";\n" "+\t\treg = <0x26>;\n" "+\t\tgpio-controller;\n" "+\t\t#gpio-cells = <2>;\n" "+\t};\n" "+\n" - "+\ti2c-mux at 70 {\n" + "+\ti2c-mux@70 {\n" "+\t\tcompatible = \"nxp,pca9546\";\n" "+\t\tstatus = \"okay\";\n" "+\t\treg = <0x70>;\n" "+\t\t#address-cells = <1>;\n" "+\t\t#size-cells = <0>;\n" "+\n" - "+\t\tchannel_1: i2c at 0 {\n" + "+\t\tchannel_1: i2c@0 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <0>;\n" "+\t\t};\n" "+\n" - "+\t\tchannel_2: i2c at 1 {\n" + "+\t\tchannel_2: i2c@1 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <1>;\n" "+\t\t};\n" "+\n" - "+\t\tchannel_3: i2c at 2 {\n" + "+\t\tchannel_3: i2c@2 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <2>;\n" "+\t\t};\n" "+\n" - "+\t\tchannel_4: i2c at 3 {\n" + "+\t\tchannel_4: i2c@3 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <3>;\n" @@ -289,26 +300,26 @@ "+&i2c5 {\n" "+\tstatus = \"okay\";\n" "+\n" - "+\tpca9555_5_24: gpio at 24 {\n" + "+\tpca9555_5_24: gpio@24 {\n" "+\t\tcompatible = \"nxp,pca9555\";\n" "+\t\treg = <0x24>;\n" "+\t\tgpio-controller;\n" "+\t\t#gpio-cells = <2>;\n" "+\t};\n" "+\n" - "+\ti2c-mux at 70 {\n" + "+\ti2c-mux@70 {\n" "+\t\tcompatible = \"nxp,pca9546\";\n" "+\t\tstatus = \"okay\";\n" "+\t\treg = <0x70 >;\n" "+\t\t#address-cells = <1>;\n" "+\t\t#size-cells = <0>;\n" "+\n" - "+\t\tchannel_5: i2c at 0 {\n" + "+\t\tchannel_5: i2c@0 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <0>;\n" "+\n" - "+\t\t\tpca9555_5_5_20: gpio at 20 {\n" + "+\t\t\tpca9555_5_5_20: gpio@20 {\n" "+\t\t\t\tcompatible = \"nxp,pca9555\";\n" "+\t\t\t\treg = <0x20>;\n" "+\t\t\t\tgpio-controller;\n" @@ -320,33 +331,33 @@ "+\t\t\t\t\t\"SYS_FAN2\", \"SYS_FAN1\";\n" "+\t\t\t};\n" "+\n" - "+\t\t\tpca9555_5_5_21: gpio at 21 {\n" + "+\t\t\tpca9555_5_5_21: gpio@21 {\n" "+\t\t\t\tcompatible = \"nxp,pca9555\";\n" "+\t\t\t\treg = <0x21>;\n" "+\t\t\t\tgpio-controller;\n" "+\t\t\t\t#gpio-cells = <2>;\n" "+\t\t\t};\n" "+\n" - "+\t\t\tpower-monitor at 44 {\n" + "+\t\t\tpower-monitor@44 {\n" "+\t\t\t\tcompatible = \"ti,ina219\";\n" "+\t\t\t\treg = <0x44>;\n" "+\t\t\t\tshunt-resistor = <2>;\n" "+\t\t\t};\n" "+\t\t};\n" "+\n" - "+\t\tchannel_6: i2c at 1 {\n" + "+\t\tchannel_6: i2c@1 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <1>;\n" "+\t\t};\n" "+\n" - "+\t\tchannel_7: i2c at 2 {\n" + "+\t\tchannel_7: i2c@2 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <2>;\n" "+\t\t};\n" "+\n" - "+\t\tchannel_8: i2c at 3 {\n" + "+\t\tchannel_8: i2c@3 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <3>;\n" @@ -357,14 +368,14 @@ "+&i2c6 {\n" "+\tstatus = \"okay\";\n" "+\n" - "+\tpca9555_6_27: gpio at 27 {\n" + "+\tpca9555_6_27: gpio@27 {\n" "+\t\tcompatible = \"nxp,pca9555\";\n" "+\t\treg = <0x27>;\n" "+\t\tgpio-controller;\n" "+\t\t#gpio-cells = <2>;\n" "+\t};\n" "+\n" - "+\tpca9555_6_20: gpio at 20 {\n" + "+\tpca9555_6_20: gpio@20 {\n" "+\t\tcompatible = \"nxp,pca9555\";\n" "+\t\treg = <0x20>;\n" "+\t\tgpio-controller;\n" @@ -375,7 +386,7 @@ "+\t\t/*B4 12*/\t\"\", \"\", \"\", \"\";\n" "+\t};\n" "+\n" - "+\tpca9555_6_21: gpio at 21 {\n" + "+\tpca9555_6_21: gpio@21 {\n" "+\t\tcompatible = \"nxp,pca9555\";\n" "+\t\treg = <0x21>;\n" "+\t\tgpio-controller;\n" @@ -386,7 +397,7 @@ "+&i2c7 {\n" "+\tstatus = \"okay\";\n" "+\n" - "+\ti2c-mux at 70 {\n" + "+\ti2c-mux@70 {\n" "+\t\tcompatible = \"nxp,pca9546\";\n" "+\t\tstatus = \"okay\";\n" "+\t\treg = <0x70>;\n" @@ -394,54 +405,54 @@ "+\t\t#size-cells = <0>;\n" "+\t\tidle-state = <1>;\n" "+\n" - "+\t\tchannel_9: i2c at 0 {\n" + "+\t\tchannel_9: i2c@0 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <0>;\n" "+\n" - "+\t\t\ttemperature-sensor at 48 {\n" + "+\t\t\ttemperature-sensor@48 {\n" "+\t\t\t\tcompatible = \"ti,tmp75\";\n" "+\t\t\t\treg = <0x48>;\n" "+\t\t\t};\n" "+\n" - "+\t\t\ttemperature-sensor at 49 {\n" + "+\t\t\ttemperature-sensor@49 {\n" "+\t\t\t\tcompatible = \"ti,tmp75\";\n" "+\t\t\t\treg = <0x49>;\n" "+\t\t\t};\n" "+\n" - "+\t\t\tpower-monitor at 40 {\n" + "+\t\t\tpower-monitor@40 {\n" "+\t\t\t\tcompatible = \"ti,ina219\";\n" "+\t\t\t\treg = <0x40>;\n" "+\t\t\t\tshunt-resistor = <2>;\n" "+\t\t\t};\n" "+\n" - "+\t\t\tpower-monitor at 41 {\n" + "+\t\t\tpower-monitor@41 {\n" "+\t\t\t\tcompatible = \"ti,ina219\";\n" "+\t\t\t\treg = <0x41>;\n" "+\t\t\t\tshunt-resistor = <5>;\n" "+\t\t\t};\n" "+\t\t};\n" "+\n" - "+\t\tchannel_10: i2c at 1 {\n" + "+\t\tchannel_10: i2c@1 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <1>;\n" "+\t\t};\n" "+\n" - "+\t\tchannel_11: i2c at 2 {\n" + "+\t\tchannel_11: i2c@2 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <2>;\n" "+\t\t};\n" "+\n" - "+\t\tchannel_12: i2c at 3 {\n" + "+\t\tchannel_12: i2c@3 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <3>;\n" "+\t\t};\n" "+\t};\n" "+\n" - "+\ti2c-mux at 71 {\n" + "+\ti2c-mux@71 {\n" "+\t\tcompatible = \"nxp,pca9546\";\n" "+\t\tstatus = \"okay\";\n" "+\t\treg = <0x71>;\n" @@ -449,25 +460,25 @@ "+\t\t#size-cells = <0>;\n" "+\t\ti2c-mux-idle-disconnect;\n" "+\n" - "+\t\tchannel_13: i2c at 0 {\n" + "+\t\tchannel_13: i2c@0 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <0>;\n" "+\t\t};\n" "+\n" - "+\t\tchannel_14: i2c at 1 {\n" + "+\t\tchannel_14: i2c@1 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <1>;\n" "+\t\t};\n" "+\n" - "+\t\tchannel_15: i2c at 2 {\n" + "+\t\tchannel_15: i2c@2 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <2>;\n" "+\t\t};\n" "+\n" - "+\t\tchannel_16: i2c at 3 {\n" + "+\t\tchannel_16: i2c@3 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <3>;\n" @@ -478,7 +489,7 @@ "+&i2c8 {\n" "+\tstatus = \"okay\";\n" "+\n" - "+\ti2c-mux at 70 {\n" + "+\ti2c-mux@70 {\n" "+\t\tcompatible = \"nxp,pca9546\";\n" "+\t\tstatus = \"okay\";\n" "+\t\treg = <0x70>;\n" @@ -486,36 +497,36 @@ "+\t\t#size-cells = <0>;\n" "+\t\ti2c-mux-idle-disconnect;\n" "+\n" - "+\t\tchannel_17: i2c at 0 {\n" + "+\t\tchannel_17: i2c@0 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <0>;\n" "+\t\t};\n" "+\n" - "+\t\tchannel_18: i2c at 1 {\n" + "+\t\tchannel_18: i2c@1 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <1>;\n" "+\n" - "+\t\t\ttemperature-sensor at 48 {\n" + "+\t\t\ttemperature-sensor@48 {\n" "+\t\t\t\tcompatible = \"ti,tmp75\";\n" "+\t\t\t\treg = <0x48>;\n" "+\t\t\t};\n" "+\n" - "+\t\t\tpower-monitor at 41 {\n" + "+\t\t\tpower-monitor@41 {\n" "+\t\t\t\tcompatible = \"ti,ina219\";\n" "+\t\t\t\treg = <0x41>;\n" "+\t\t\t\tshunt-resistor = <5>;\n" "+\t\t\t};\n" "+\t\t};\n" "+\n" - "+\t\tchannel_19: i2c at 2 {\n" + "+\t\tchannel_19: i2c@2 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <2>;\n" "+\t\t};\n" "+\n" - "+\t\tchannel_20: i2c at 3 {\n" + "+\t\tchannel_20: i2c@3 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <3>;\n" @@ -539,12 +550,12 @@ "+\tstatus = \"okay\";\n" "+\tmulti-master;\n" "+\n" - "+\teeprom at 50 {\n" + "+\teeprom@50 {\n" "+\t\tcompatible = \"atmel,24c08\";\n" "+\t\treg = <0x50>;\n" "+\t};\n" "+\n" - "+\teeprom at 51 {\n" + "+\teeprom@51 {\n" "+\t\tcompatible = \"atmel,24c08\";\n" "+\t\treg = <0x51>;\n" "+\t};\n" @@ -634,4 +645,4 @@ "-- \n" 2.25.1 -67f5a542c299dc52c90d485034aed29d95bddda55a42fab1f397896f4cb13049 +b7b220d120e5d43455f23770844d3824aca9a8c27a631e64b04aad284ef1f360
diff --git a/a/1.txt b/N2/1.txt index 418f398..d264379 100644 --- a/a/1.txt +++ b/N2/1.txt @@ -65,7 +65,7 @@ index 000000000..64f4ed07c + stdout-path = "serial4:115200n8"; + }; + -+ memory at 80000000 { ++ memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; @@ -164,7 +164,7 @@ index 000000000..64f4ed07c +&fmc { + status = "okay"; + -+ flash at 0 { ++ flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; @@ -178,7 +178,7 @@ index 000000000..64f4ed07c + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + -+ flash at 0 { ++ flash@0 { + status = "okay"; + label = "bios"; + spi-max-frequency = <50000000>; @@ -204,31 +204,31 @@ index 000000000..64f4ed07c +&i2c4 { + status = "okay"; + -+ temperature-sensor at 48 { ++ temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + -+ temperature-sensor at 49 { ++ temperature-sensor@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + -+ pca9555_4_20: gpio at 20 { ++ pca9555_4_20: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + -+ pca9555_4_22: gpio at 22 { ++ pca9555_4_22: gpio@22 { + compatible = "nxp,pca9555"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + -+ pca9555_4_24: gpio at 24 { ++ pca9555_4_24: gpio@24 { + compatible = "nxp,pca9555"; + reg = <0x24>; + gpio-controller; @@ -239,39 +239,39 @@ index 000000000..64f4ed07c + /*B0 - B7 8*/ "", "", "", "", "", "", "", ""; + }; + -+ pca9555_4_26: gpio at 26 { ++ pca9555_4_26: gpio@26 { + compatible = "nxp,pca9555"; + reg = <0x26>; + gpio-controller; + #gpio-cells = <2>; + }; + -+ i2c-mux at 70 { ++ i2c-mux@70 { + compatible = "nxp,pca9546"; + status = "okay"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + -+ channel_1: i2c at 0 { ++ channel_1: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + -+ channel_2: i2c at 1 { ++ channel_2: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + -+ channel_3: i2c at 2 { ++ channel_3: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + -+ channel_4: i2c at 3 { ++ channel_4: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; @@ -282,26 +282,26 @@ index 000000000..64f4ed07c +&i2c5 { + status = "okay"; + -+ pca9555_5_24: gpio at 24 { ++ pca9555_5_24: gpio@24 { + compatible = "nxp,pca9555"; + reg = <0x24>; + gpio-controller; + #gpio-cells = <2>; + }; + -+ i2c-mux at 70 { ++ i2c-mux@70 { + compatible = "nxp,pca9546"; + status = "okay"; + reg = <0x70 >; + #address-cells = <1>; + #size-cells = <0>; + -+ channel_5: i2c at 0 { ++ channel_5: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + -+ pca9555_5_5_20: gpio at 20 { ++ pca9555_5_5_20: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; @@ -313,33 +313,33 @@ index 000000000..64f4ed07c + "SYS_FAN2", "SYS_FAN1"; + }; + -+ pca9555_5_5_21: gpio at 21 { ++ pca9555_5_5_21: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + -+ power-monitor at 44 { ++ power-monitor@44 { + compatible = "ti,ina219"; + reg = <0x44>; + shunt-resistor = <2>; + }; + }; + -+ channel_6: i2c at 1 { ++ channel_6: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + -+ channel_7: i2c at 2 { ++ channel_7: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + -+ channel_8: i2c at 3 { ++ channel_8: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; @@ -350,14 +350,14 @@ index 000000000..64f4ed07c +&i2c6 { + status = "okay"; + -+ pca9555_6_27: gpio at 27 { ++ pca9555_6_27: gpio@27 { + compatible = "nxp,pca9555"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + }; + -+ pca9555_6_20: gpio at 20 { ++ pca9555_6_20: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; @@ -368,7 +368,7 @@ index 000000000..64f4ed07c + /*B4 12*/ "", "", "", ""; + }; + -+ pca9555_6_21: gpio at 21 { ++ pca9555_6_21: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; @@ -379,7 +379,7 @@ index 000000000..64f4ed07c +&i2c7 { + status = "okay"; + -+ i2c-mux at 70 { ++ i2c-mux@70 { + compatible = "nxp,pca9546"; + status = "okay"; + reg = <0x70>; @@ -387,54 +387,54 @@ index 000000000..64f4ed07c + #size-cells = <0>; + idle-state = <1>; + -+ channel_9: i2c at 0 { ++ channel_9: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + -+ temperature-sensor at 48 { ++ temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + -+ temperature-sensor at 49 { ++ temperature-sensor@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + -+ power-monitor at 40 { ++ power-monitor@40 { + compatible = "ti,ina219"; + reg = <0x40>; + shunt-resistor = <2>; + }; + -+ power-monitor at 41 { ++ power-monitor@41 { + compatible = "ti,ina219"; + reg = <0x41>; + shunt-resistor = <5>; + }; + }; + -+ channel_10: i2c at 1 { ++ channel_10: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + -+ channel_11: i2c at 2 { ++ channel_11: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + -+ channel_12: i2c at 3 { ++ channel_12: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + -+ i2c-mux at 71 { ++ i2c-mux@71 { + compatible = "nxp,pca9546"; + status = "okay"; + reg = <0x71>; @@ -442,25 +442,25 @@ index 000000000..64f4ed07c + #size-cells = <0>; + i2c-mux-idle-disconnect; + -+ channel_13: i2c at 0 { ++ channel_13: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + -+ channel_14: i2c at 1 { ++ channel_14: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + -+ channel_15: i2c at 2 { ++ channel_15: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + -+ channel_16: i2c at 3 { ++ channel_16: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; @@ -471,7 +471,7 @@ index 000000000..64f4ed07c +&i2c8 { + status = "okay"; + -+ i2c-mux at 70 { ++ i2c-mux@70 { + compatible = "nxp,pca9546"; + status = "okay"; + reg = <0x70>; @@ -479,36 +479,36 @@ index 000000000..64f4ed07c + #size-cells = <0>; + i2c-mux-idle-disconnect; + -+ channel_17: i2c at 0 { ++ channel_17: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + -+ channel_18: i2c at 1 { ++ channel_18: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + -+ temperature-sensor at 48 { ++ temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + -+ power-monitor at 41 { ++ power-monitor@41 { + compatible = "ti,ina219"; + reg = <0x41>; + shunt-resistor = <5>; + }; + }; + -+ channel_19: i2c at 2 { ++ channel_19: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + -+ channel_20: i2c at 3 { ++ channel_20: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; @@ -532,12 +532,12 @@ index 000000000..64f4ed07c + status = "okay"; + multi-master; + -+ eeprom at 50 { ++ eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + }; + -+ eeprom at 51 { ++ eeprom@51 { + compatible = "atmel,24c08"; + reg = <0x51>; + }; @@ -626,3 +626,9 @@ index 000000000..64f4ed07c +}; -- 2.25.1 + + +_______________________________________________ +linux-arm-kernel mailing list +linux-arm-kernel@lists.infradead.org +http://lists.infradead.org/mailman/listinfo/linux-arm-kernel diff --git a/a/content_digest b/N2/content_digest index 5ec7bc5..f6f2627 100644 --- a/a/content_digest +++ b/N2/content_digest @@ -1,8 +1,21 @@ "ref\020240326103549.2413515-1-Kelly_Hung@asus.com\0" "From\0Kelly Hung <ppighouse@gmail.com>\0" "Subject\0[PATCH v6 2/2] ARM: dts: aspeed: x4tf: Add dts for asus x4tf project\0" - "Date\0Tue, 26 Mar 2024 10:36:10 -0000\0" - "To\0linux-aspeed@lists.ozlabs.org\0" + "Date\0Tue, 26 Mar 2024 18:35:49 +0800\0" + "To\0robh+dt@kernel.org\0" + "Cc\0krzysztof.kozlowski+dt@linaro.org" + conor+dt@kernel.org + joel@jms.id.au + andrew@codeconstruct.com.au + devicetree@vger.kernel.org + linux-arm-kernel@lists.infradead.org + linux-aspeed@lists.ozlabs.org + linux-kernel@vger.kernel.org + openbmc@lists.ozlabs.org + kelly_hung@asus.com + Allenyy_Hsu@asus.com + Kelly Hung <Kelly_Hung@asus.com> + " Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>\0" "\00:1\0" "b\0" "Base on aspeed-g6.dtsi and can boot into BMC console.\n" @@ -72,7 +85,7 @@ "+\t\tstdout-path = \"serial4:115200n8\";\n" "+\t};\n" "+\n" - "+\tmemory at 80000000 {\n" + "+\tmemory@80000000 {\n" "+\t\tdevice_type = \"memory\";\n" "+\t\treg = <0x80000000 0x40000000>;\n" "+\t};\n" @@ -171,7 +184,7 @@ "+&fmc {\n" "+\tstatus = \"okay\";\n" "+\n" - "+\tflash at 0 {\n" + "+\tflash@0 {\n" "+\t\tstatus = \"okay\";\n" "+\t\tm25p,fast-read;\n" "+\t\tlabel = \"bmc\";\n" @@ -185,7 +198,7 @@ "+\tpinctrl-names = \"default\";\n" "+\tpinctrl-0 = <&pinctrl_spi1_default>;\n" "+\n" - "+\tflash at 0 {\n" + "+\tflash@0 {\n" "+\t\tstatus = \"okay\";\n" "+\t\tlabel = \"bios\";\n" "+\t\tspi-max-frequency = <50000000>;\n" @@ -211,31 +224,31 @@ "+&i2c4 {\n" "+\tstatus = \"okay\";\n" "+\n" - "+\ttemperature-sensor at 48 {\n" + "+\ttemperature-sensor@48 {\n" "+\t\tcompatible = \"ti,tmp75\";\n" "+\t\treg = <0x48>;\n" "+\t};\n" "+\n" - "+\ttemperature-sensor at 49 {\n" + "+\ttemperature-sensor@49 {\n" "+\t\tcompatible = \"ti,tmp75\";\n" "+\t\treg = <0x49>;\n" "+\t};\n" "+\n" - "+\tpca9555_4_20: gpio at 20 {\n" + "+\tpca9555_4_20: gpio@20 {\n" "+\t\tcompatible = \"nxp,pca9555\";\n" "+\t\treg = <0x20>;\n" "+\t\tgpio-controller;\n" "+\t\t#gpio-cells = <2>;\n" "+\t};\n" "+\n" - "+\tpca9555_4_22: gpio at 22 {\n" + "+\tpca9555_4_22: gpio@22 {\n" "+\t\tcompatible = \"nxp,pca9555\";\n" "+\t\treg = <0x22>;\n" "+\t\tgpio-controller;\n" "+\t\t#gpio-cells = <2>;\n" "+\t};\n" "+\n" - "+\tpca9555_4_24: gpio at 24 {\n" + "+\tpca9555_4_24: gpio@24 {\n" "+\t\tcompatible = \"nxp,pca9555\";\n" "+\t\treg = <0x24>;\n" "+\t\tgpio-controller;\n" @@ -246,39 +259,39 @@ "+\t\t/*B0 - B7 8*/\t\"\", \"\", \"\", \"\", \"\", \"\", \"\", \"\";\n" "+\t};\n" "+\n" - "+\tpca9555_4_26: gpio at 26 {\n" + "+\tpca9555_4_26: gpio@26 {\n" "+\t\tcompatible = \"nxp,pca9555\";\n" "+\t\treg = <0x26>;\n" "+\t\tgpio-controller;\n" "+\t\t#gpio-cells = <2>;\n" "+\t};\n" "+\n" - "+\ti2c-mux at 70 {\n" + "+\ti2c-mux@70 {\n" "+\t\tcompatible = \"nxp,pca9546\";\n" "+\t\tstatus = \"okay\";\n" "+\t\treg = <0x70>;\n" "+\t\t#address-cells = <1>;\n" "+\t\t#size-cells = <0>;\n" "+\n" - "+\t\tchannel_1: i2c at 0 {\n" + "+\t\tchannel_1: i2c@0 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <0>;\n" "+\t\t};\n" "+\n" - "+\t\tchannel_2: i2c at 1 {\n" + "+\t\tchannel_2: i2c@1 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <1>;\n" "+\t\t};\n" "+\n" - "+\t\tchannel_3: i2c at 2 {\n" + "+\t\tchannel_3: i2c@2 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <2>;\n" "+\t\t};\n" "+\n" - "+\t\tchannel_4: i2c at 3 {\n" + "+\t\tchannel_4: i2c@3 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <3>;\n" @@ -289,26 +302,26 @@ "+&i2c5 {\n" "+\tstatus = \"okay\";\n" "+\n" - "+\tpca9555_5_24: gpio at 24 {\n" + "+\tpca9555_5_24: gpio@24 {\n" "+\t\tcompatible = \"nxp,pca9555\";\n" "+\t\treg = <0x24>;\n" "+\t\tgpio-controller;\n" "+\t\t#gpio-cells = <2>;\n" "+\t};\n" "+\n" - "+\ti2c-mux at 70 {\n" + "+\ti2c-mux@70 {\n" "+\t\tcompatible = \"nxp,pca9546\";\n" "+\t\tstatus = \"okay\";\n" "+\t\treg = <0x70 >;\n" "+\t\t#address-cells = <1>;\n" "+\t\t#size-cells = <0>;\n" "+\n" - "+\t\tchannel_5: i2c at 0 {\n" + "+\t\tchannel_5: i2c@0 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <0>;\n" "+\n" - "+\t\t\tpca9555_5_5_20: gpio at 20 {\n" + "+\t\t\tpca9555_5_5_20: gpio@20 {\n" "+\t\t\t\tcompatible = \"nxp,pca9555\";\n" "+\t\t\t\treg = <0x20>;\n" "+\t\t\t\tgpio-controller;\n" @@ -320,33 +333,33 @@ "+\t\t\t\t\t\"SYS_FAN2\", \"SYS_FAN1\";\n" "+\t\t\t};\n" "+\n" - "+\t\t\tpca9555_5_5_21: gpio at 21 {\n" + "+\t\t\tpca9555_5_5_21: gpio@21 {\n" "+\t\t\t\tcompatible = \"nxp,pca9555\";\n" "+\t\t\t\treg = <0x21>;\n" "+\t\t\t\tgpio-controller;\n" "+\t\t\t\t#gpio-cells = <2>;\n" "+\t\t\t};\n" "+\n" - "+\t\t\tpower-monitor at 44 {\n" + "+\t\t\tpower-monitor@44 {\n" "+\t\t\t\tcompatible = \"ti,ina219\";\n" "+\t\t\t\treg = <0x44>;\n" "+\t\t\t\tshunt-resistor = <2>;\n" "+\t\t\t};\n" "+\t\t};\n" "+\n" - "+\t\tchannel_6: i2c at 1 {\n" + "+\t\tchannel_6: i2c@1 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <1>;\n" "+\t\t};\n" "+\n" - "+\t\tchannel_7: i2c at 2 {\n" + "+\t\tchannel_7: i2c@2 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <2>;\n" "+\t\t};\n" "+\n" - "+\t\tchannel_8: i2c at 3 {\n" + "+\t\tchannel_8: i2c@3 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <3>;\n" @@ -357,14 +370,14 @@ "+&i2c6 {\n" "+\tstatus = \"okay\";\n" "+\n" - "+\tpca9555_6_27: gpio at 27 {\n" + "+\tpca9555_6_27: gpio@27 {\n" "+\t\tcompatible = \"nxp,pca9555\";\n" "+\t\treg = <0x27>;\n" "+\t\tgpio-controller;\n" "+\t\t#gpio-cells = <2>;\n" "+\t};\n" "+\n" - "+\tpca9555_6_20: gpio at 20 {\n" + "+\tpca9555_6_20: gpio@20 {\n" "+\t\tcompatible = \"nxp,pca9555\";\n" "+\t\treg = <0x20>;\n" "+\t\tgpio-controller;\n" @@ -375,7 +388,7 @@ "+\t\t/*B4 12*/\t\"\", \"\", \"\", \"\";\n" "+\t};\n" "+\n" - "+\tpca9555_6_21: gpio at 21 {\n" + "+\tpca9555_6_21: gpio@21 {\n" "+\t\tcompatible = \"nxp,pca9555\";\n" "+\t\treg = <0x21>;\n" "+\t\tgpio-controller;\n" @@ -386,7 +399,7 @@ "+&i2c7 {\n" "+\tstatus = \"okay\";\n" "+\n" - "+\ti2c-mux at 70 {\n" + "+\ti2c-mux@70 {\n" "+\t\tcompatible = \"nxp,pca9546\";\n" "+\t\tstatus = \"okay\";\n" "+\t\treg = <0x70>;\n" @@ -394,54 +407,54 @@ "+\t\t#size-cells = <0>;\n" "+\t\tidle-state = <1>;\n" "+\n" - "+\t\tchannel_9: i2c at 0 {\n" + "+\t\tchannel_9: i2c@0 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <0>;\n" "+\n" - "+\t\t\ttemperature-sensor at 48 {\n" + "+\t\t\ttemperature-sensor@48 {\n" "+\t\t\t\tcompatible = \"ti,tmp75\";\n" "+\t\t\t\treg = <0x48>;\n" "+\t\t\t};\n" "+\n" - "+\t\t\ttemperature-sensor at 49 {\n" + "+\t\t\ttemperature-sensor@49 {\n" "+\t\t\t\tcompatible = \"ti,tmp75\";\n" "+\t\t\t\treg = <0x49>;\n" "+\t\t\t};\n" "+\n" - "+\t\t\tpower-monitor at 40 {\n" + "+\t\t\tpower-monitor@40 {\n" "+\t\t\t\tcompatible = \"ti,ina219\";\n" "+\t\t\t\treg = <0x40>;\n" "+\t\t\t\tshunt-resistor = <2>;\n" "+\t\t\t};\n" "+\n" - "+\t\t\tpower-monitor at 41 {\n" + "+\t\t\tpower-monitor@41 {\n" "+\t\t\t\tcompatible = \"ti,ina219\";\n" "+\t\t\t\treg = <0x41>;\n" "+\t\t\t\tshunt-resistor = <5>;\n" "+\t\t\t};\n" "+\t\t};\n" "+\n" - "+\t\tchannel_10: i2c at 1 {\n" + "+\t\tchannel_10: i2c@1 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <1>;\n" "+\t\t};\n" "+\n" - "+\t\tchannel_11: i2c at 2 {\n" + "+\t\tchannel_11: i2c@2 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <2>;\n" "+\t\t};\n" "+\n" - "+\t\tchannel_12: i2c at 3 {\n" + "+\t\tchannel_12: i2c@3 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <3>;\n" "+\t\t};\n" "+\t};\n" "+\n" - "+\ti2c-mux at 71 {\n" + "+\ti2c-mux@71 {\n" "+\t\tcompatible = \"nxp,pca9546\";\n" "+\t\tstatus = \"okay\";\n" "+\t\treg = <0x71>;\n" @@ -449,25 +462,25 @@ "+\t\t#size-cells = <0>;\n" "+\t\ti2c-mux-idle-disconnect;\n" "+\n" - "+\t\tchannel_13: i2c at 0 {\n" + "+\t\tchannel_13: i2c@0 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <0>;\n" "+\t\t};\n" "+\n" - "+\t\tchannel_14: i2c at 1 {\n" + "+\t\tchannel_14: i2c@1 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <1>;\n" "+\t\t};\n" "+\n" - "+\t\tchannel_15: i2c at 2 {\n" + "+\t\tchannel_15: i2c@2 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <2>;\n" "+\t\t};\n" "+\n" - "+\t\tchannel_16: i2c at 3 {\n" + "+\t\tchannel_16: i2c@3 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <3>;\n" @@ -478,7 +491,7 @@ "+&i2c8 {\n" "+\tstatus = \"okay\";\n" "+\n" - "+\ti2c-mux at 70 {\n" + "+\ti2c-mux@70 {\n" "+\t\tcompatible = \"nxp,pca9546\";\n" "+\t\tstatus = \"okay\";\n" "+\t\treg = <0x70>;\n" @@ -486,36 +499,36 @@ "+\t\t#size-cells = <0>;\n" "+\t\ti2c-mux-idle-disconnect;\n" "+\n" - "+\t\tchannel_17: i2c at 0 {\n" + "+\t\tchannel_17: i2c@0 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <0>;\n" "+\t\t};\n" "+\n" - "+\t\tchannel_18: i2c at 1 {\n" + "+\t\tchannel_18: i2c@1 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <1>;\n" "+\n" - "+\t\t\ttemperature-sensor at 48 {\n" + "+\t\t\ttemperature-sensor@48 {\n" "+\t\t\t\tcompatible = \"ti,tmp75\";\n" "+\t\t\t\treg = <0x48>;\n" "+\t\t\t};\n" "+\n" - "+\t\t\tpower-monitor at 41 {\n" + "+\t\t\tpower-monitor@41 {\n" "+\t\t\t\tcompatible = \"ti,ina219\";\n" "+\t\t\t\treg = <0x41>;\n" "+\t\t\t\tshunt-resistor = <5>;\n" "+\t\t\t};\n" "+\t\t};\n" "+\n" - "+\t\tchannel_19: i2c at 2 {\n" + "+\t\tchannel_19: i2c@2 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <2>;\n" "+\t\t};\n" "+\n" - "+\t\tchannel_20: i2c at 3 {\n" + "+\t\tchannel_20: i2c@3 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <3>;\n" @@ -539,12 +552,12 @@ "+\tstatus = \"okay\";\n" "+\tmulti-master;\n" "+\n" - "+\teeprom at 50 {\n" + "+\teeprom@50 {\n" "+\t\tcompatible = \"atmel,24c08\";\n" "+\t\treg = <0x50>;\n" "+\t};\n" "+\n" - "+\teeprom at 51 {\n" + "+\teeprom@51 {\n" "+\t\tcompatible = \"atmel,24c08\";\n" "+\t\treg = <0x51>;\n" "+\t};\n" @@ -632,6 +645,12 @@ "+\t/*Z0 200*/\t\"\", \"\", \"\", \"\", \"\", \"\", \"\", \"\";\n" "+};\n" "-- \n" - 2.25.1 + "2.25.1\n" + "\n" + "\n" + "_______________________________________________\n" + "linux-arm-kernel mailing list\n" + "linux-arm-kernel@lists.infradead.org\n" + http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -67f5a542c299dc52c90d485034aed29d95bddda55a42fab1f397896f4cb13049 +a1315b7333739cb0435f280cfb0bea35ed34d018564339a8984c4c914ecd8d18
diff --git a/a/1.txt b/N3/1.txt index 418f398..c20479e 100644 --- a/a/1.txt +++ b/N3/1.txt @@ -65,7 +65,7 @@ index 000000000..64f4ed07c + stdout-path = "serial4:115200n8"; + }; + -+ memory at 80000000 { ++ memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; @@ -164,7 +164,7 @@ index 000000000..64f4ed07c +&fmc { + status = "okay"; + -+ flash at 0 { ++ flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; @@ -178,7 +178,7 @@ index 000000000..64f4ed07c + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + -+ flash at 0 { ++ flash@0 { + status = "okay"; + label = "bios"; + spi-max-frequency = <50000000>; @@ -204,31 +204,31 @@ index 000000000..64f4ed07c +&i2c4 { + status = "okay"; + -+ temperature-sensor at 48 { ++ temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + -+ temperature-sensor at 49 { ++ temperature-sensor@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + -+ pca9555_4_20: gpio at 20 { ++ pca9555_4_20: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + -+ pca9555_4_22: gpio at 22 { ++ pca9555_4_22: gpio@22 { + compatible = "nxp,pca9555"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + -+ pca9555_4_24: gpio at 24 { ++ pca9555_4_24: gpio@24 { + compatible = "nxp,pca9555"; + reg = <0x24>; + gpio-controller; @@ -239,39 +239,39 @@ index 000000000..64f4ed07c + /*B0 - B7 8*/ "", "", "", "", "", "", "", ""; + }; + -+ pca9555_4_26: gpio at 26 { ++ pca9555_4_26: gpio@26 { + compatible = "nxp,pca9555"; + reg = <0x26>; + gpio-controller; + #gpio-cells = <2>; + }; + -+ i2c-mux at 70 { ++ i2c-mux@70 { + compatible = "nxp,pca9546"; + status = "okay"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + -+ channel_1: i2c at 0 { ++ channel_1: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + -+ channel_2: i2c at 1 { ++ channel_2: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + -+ channel_3: i2c at 2 { ++ channel_3: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + -+ channel_4: i2c at 3 { ++ channel_4: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; @@ -282,26 +282,26 @@ index 000000000..64f4ed07c +&i2c5 { + status = "okay"; + -+ pca9555_5_24: gpio at 24 { ++ pca9555_5_24: gpio@24 { + compatible = "nxp,pca9555"; + reg = <0x24>; + gpio-controller; + #gpio-cells = <2>; + }; + -+ i2c-mux at 70 { ++ i2c-mux@70 { + compatible = "nxp,pca9546"; + status = "okay"; + reg = <0x70 >; + #address-cells = <1>; + #size-cells = <0>; + -+ channel_5: i2c at 0 { ++ channel_5: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + -+ pca9555_5_5_20: gpio at 20 { ++ pca9555_5_5_20: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; @@ -313,33 +313,33 @@ index 000000000..64f4ed07c + "SYS_FAN2", "SYS_FAN1"; + }; + -+ pca9555_5_5_21: gpio at 21 { ++ pca9555_5_5_21: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + -+ power-monitor at 44 { ++ power-monitor@44 { + compatible = "ti,ina219"; + reg = <0x44>; + shunt-resistor = <2>; + }; + }; + -+ channel_6: i2c at 1 { ++ channel_6: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + -+ channel_7: i2c at 2 { ++ channel_7: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + -+ channel_8: i2c at 3 { ++ channel_8: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; @@ -350,14 +350,14 @@ index 000000000..64f4ed07c +&i2c6 { + status = "okay"; + -+ pca9555_6_27: gpio at 27 { ++ pca9555_6_27: gpio@27 { + compatible = "nxp,pca9555"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + }; + -+ pca9555_6_20: gpio at 20 { ++ pca9555_6_20: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; @@ -368,7 +368,7 @@ index 000000000..64f4ed07c + /*B4 12*/ "", "", "", ""; + }; + -+ pca9555_6_21: gpio at 21 { ++ pca9555_6_21: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; @@ -379,7 +379,7 @@ index 000000000..64f4ed07c +&i2c7 { + status = "okay"; + -+ i2c-mux at 70 { ++ i2c-mux@70 { + compatible = "nxp,pca9546"; + status = "okay"; + reg = <0x70>; @@ -387,54 +387,54 @@ index 000000000..64f4ed07c + #size-cells = <0>; + idle-state = <1>; + -+ channel_9: i2c at 0 { ++ channel_9: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + -+ temperature-sensor at 48 { ++ temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + -+ temperature-sensor at 49 { ++ temperature-sensor@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + -+ power-monitor at 40 { ++ power-monitor@40 { + compatible = "ti,ina219"; + reg = <0x40>; + shunt-resistor = <2>; + }; + -+ power-monitor at 41 { ++ power-monitor@41 { + compatible = "ti,ina219"; + reg = <0x41>; + shunt-resistor = <5>; + }; + }; + -+ channel_10: i2c at 1 { ++ channel_10: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + -+ channel_11: i2c at 2 { ++ channel_11: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + -+ channel_12: i2c at 3 { ++ channel_12: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + -+ i2c-mux at 71 { ++ i2c-mux@71 { + compatible = "nxp,pca9546"; + status = "okay"; + reg = <0x71>; @@ -442,25 +442,25 @@ index 000000000..64f4ed07c + #size-cells = <0>; + i2c-mux-idle-disconnect; + -+ channel_13: i2c at 0 { ++ channel_13: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + -+ channel_14: i2c at 1 { ++ channel_14: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + -+ channel_15: i2c at 2 { ++ channel_15: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + -+ channel_16: i2c at 3 { ++ channel_16: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; @@ -471,7 +471,7 @@ index 000000000..64f4ed07c +&i2c8 { + status = "okay"; + -+ i2c-mux at 70 { ++ i2c-mux@70 { + compatible = "nxp,pca9546"; + status = "okay"; + reg = <0x70>; @@ -479,36 +479,36 @@ index 000000000..64f4ed07c + #size-cells = <0>; + i2c-mux-idle-disconnect; + -+ channel_17: i2c at 0 { ++ channel_17: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + -+ channel_18: i2c at 1 { ++ channel_18: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + -+ temperature-sensor at 48 { ++ temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + -+ power-monitor at 41 { ++ power-monitor@41 { + compatible = "ti,ina219"; + reg = <0x41>; + shunt-resistor = <5>; + }; + }; + -+ channel_19: i2c at 2 { ++ channel_19: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + -+ channel_20: i2c at 3 { ++ channel_20: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; @@ -532,12 +532,12 @@ index 000000000..64f4ed07c + status = "okay"; + multi-master; + -+ eeprom at 50 { ++ eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + }; + -+ eeprom at 51 { ++ eeprom@51 { + compatible = "atmel,24c08"; + reg = <0x51>; + }; diff --git a/a/content_digest b/N3/content_digest index 5ec7bc5..b24b4b1 100644 --- a/a/content_digest +++ b/N3/content_digest @@ -1,8 +1,21 @@ "ref\020240326103549.2413515-1-Kelly_Hung@asus.com\0" "From\0Kelly Hung <ppighouse@gmail.com>\0" "Subject\0[PATCH v6 2/2] ARM: dts: aspeed: x4tf: Add dts for asus x4tf project\0" - "Date\0Tue, 26 Mar 2024 10:36:10 -0000\0" - "To\0linux-aspeed@lists.ozlabs.org\0" + "Date\0Tue, 26 Mar 2024 18:35:49 +0800\0" + "To\0robh+dt@kernel.org\0" + "Cc\0krzysztof.kozlowski+dt@linaro.org" + conor+dt@kernel.org + joel@jms.id.au + andrew@codeconstruct.com.au + devicetree@vger.kernel.org + linux-arm-kernel@lists.infradead.org + linux-aspeed@lists.ozlabs.org + linux-kernel@vger.kernel.org + openbmc@lists.ozlabs.org + kelly_hung@asus.com + Allenyy_Hsu@asus.com + Kelly Hung <Kelly_Hung@asus.com> + " Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>\0" "\00:1\0" "b\0" "Base on aspeed-g6.dtsi and can boot into BMC console.\n" @@ -72,7 +85,7 @@ "+\t\tstdout-path = \"serial4:115200n8\";\n" "+\t};\n" "+\n" - "+\tmemory at 80000000 {\n" + "+\tmemory@80000000 {\n" "+\t\tdevice_type = \"memory\";\n" "+\t\treg = <0x80000000 0x40000000>;\n" "+\t};\n" @@ -171,7 +184,7 @@ "+&fmc {\n" "+\tstatus = \"okay\";\n" "+\n" - "+\tflash at 0 {\n" + "+\tflash@0 {\n" "+\t\tstatus = \"okay\";\n" "+\t\tm25p,fast-read;\n" "+\t\tlabel = \"bmc\";\n" @@ -185,7 +198,7 @@ "+\tpinctrl-names = \"default\";\n" "+\tpinctrl-0 = <&pinctrl_spi1_default>;\n" "+\n" - "+\tflash at 0 {\n" + "+\tflash@0 {\n" "+\t\tstatus = \"okay\";\n" "+\t\tlabel = \"bios\";\n" "+\t\tspi-max-frequency = <50000000>;\n" @@ -211,31 +224,31 @@ "+&i2c4 {\n" "+\tstatus = \"okay\";\n" "+\n" - "+\ttemperature-sensor at 48 {\n" + "+\ttemperature-sensor@48 {\n" "+\t\tcompatible = \"ti,tmp75\";\n" "+\t\treg = <0x48>;\n" "+\t};\n" "+\n" - "+\ttemperature-sensor at 49 {\n" + "+\ttemperature-sensor@49 {\n" "+\t\tcompatible = \"ti,tmp75\";\n" "+\t\treg = <0x49>;\n" "+\t};\n" "+\n" - "+\tpca9555_4_20: gpio at 20 {\n" + "+\tpca9555_4_20: gpio@20 {\n" "+\t\tcompatible = \"nxp,pca9555\";\n" "+\t\treg = <0x20>;\n" "+\t\tgpio-controller;\n" "+\t\t#gpio-cells = <2>;\n" "+\t};\n" "+\n" - "+\tpca9555_4_22: gpio at 22 {\n" + "+\tpca9555_4_22: gpio@22 {\n" "+\t\tcompatible = \"nxp,pca9555\";\n" "+\t\treg = <0x22>;\n" "+\t\tgpio-controller;\n" "+\t\t#gpio-cells = <2>;\n" "+\t};\n" "+\n" - "+\tpca9555_4_24: gpio at 24 {\n" + "+\tpca9555_4_24: gpio@24 {\n" "+\t\tcompatible = \"nxp,pca9555\";\n" "+\t\treg = <0x24>;\n" "+\t\tgpio-controller;\n" @@ -246,39 +259,39 @@ "+\t\t/*B0 - B7 8*/\t\"\", \"\", \"\", \"\", \"\", \"\", \"\", \"\";\n" "+\t};\n" "+\n" - "+\tpca9555_4_26: gpio at 26 {\n" + "+\tpca9555_4_26: gpio@26 {\n" "+\t\tcompatible = \"nxp,pca9555\";\n" "+\t\treg = <0x26>;\n" "+\t\tgpio-controller;\n" "+\t\t#gpio-cells = <2>;\n" "+\t};\n" "+\n" - "+\ti2c-mux at 70 {\n" + "+\ti2c-mux@70 {\n" "+\t\tcompatible = \"nxp,pca9546\";\n" "+\t\tstatus = \"okay\";\n" "+\t\treg = <0x70>;\n" "+\t\t#address-cells = <1>;\n" "+\t\t#size-cells = <0>;\n" "+\n" - "+\t\tchannel_1: i2c at 0 {\n" + "+\t\tchannel_1: i2c@0 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <0>;\n" "+\t\t};\n" "+\n" - "+\t\tchannel_2: i2c at 1 {\n" + "+\t\tchannel_2: i2c@1 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <1>;\n" "+\t\t};\n" "+\n" - "+\t\tchannel_3: i2c at 2 {\n" + "+\t\tchannel_3: i2c@2 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <2>;\n" "+\t\t};\n" "+\n" - "+\t\tchannel_4: i2c at 3 {\n" + "+\t\tchannel_4: i2c@3 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <3>;\n" @@ -289,26 +302,26 @@ "+&i2c5 {\n" "+\tstatus = \"okay\";\n" "+\n" - "+\tpca9555_5_24: gpio at 24 {\n" + "+\tpca9555_5_24: gpio@24 {\n" "+\t\tcompatible = \"nxp,pca9555\";\n" "+\t\treg = <0x24>;\n" "+\t\tgpio-controller;\n" "+\t\t#gpio-cells = <2>;\n" "+\t};\n" "+\n" - "+\ti2c-mux at 70 {\n" + "+\ti2c-mux@70 {\n" "+\t\tcompatible = \"nxp,pca9546\";\n" "+\t\tstatus = \"okay\";\n" "+\t\treg = <0x70 >;\n" "+\t\t#address-cells = <1>;\n" "+\t\t#size-cells = <0>;\n" "+\n" - "+\t\tchannel_5: i2c at 0 {\n" + "+\t\tchannel_5: i2c@0 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <0>;\n" "+\n" - "+\t\t\tpca9555_5_5_20: gpio at 20 {\n" + "+\t\t\tpca9555_5_5_20: gpio@20 {\n" "+\t\t\t\tcompatible = \"nxp,pca9555\";\n" "+\t\t\t\treg = <0x20>;\n" "+\t\t\t\tgpio-controller;\n" @@ -320,33 +333,33 @@ "+\t\t\t\t\t\"SYS_FAN2\", \"SYS_FAN1\";\n" "+\t\t\t};\n" "+\n" - "+\t\t\tpca9555_5_5_21: gpio at 21 {\n" + "+\t\t\tpca9555_5_5_21: gpio@21 {\n" "+\t\t\t\tcompatible = \"nxp,pca9555\";\n" "+\t\t\t\treg = <0x21>;\n" "+\t\t\t\tgpio-controller;\n" "+\t\t\t\t#gpio-cells = <2>;\n" "+\t\t\t};\n" "+\n" - "+\t\t\tpower-monitor at 44 {\n" + "+\t\t\tpower-monitor@44 {\n" "+\t\t\t\tcompatible = \"ti,ina219\";\n" "+\t\t\t\treg = <0x44>;\n" "+\t\t\t\tshunt-resistor = <2>;\n" "+\t\t\t};\n" "+\t\t};\n" "+\n" - "+\t\tchannel_6: i2c at 1 {\n" + "+\t\tchannel_6: i2c@1 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <1>;\n" "+\t\t};\n" "+\n" - "+\t\tchannel_7: i2c at 2 {\n" + "+\t\tchannel_7: i2c@2 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <2>;\n" "+\t\t};\n" "+\n" - "+\t\tchannel_8: i2c at 3 {\n" + "+\t\tchannel_8: i2c@3 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <3>;\n" @@ -357,14 +370,14 @@ "+&i2c6 {\n" "+\tstatus = \"okay\";\n" "+\n" - "+\tpca9555_6_27: gpio at 27 {\n" + "+\tpca9555_6_27: gpio@27 {\n" "+\t\tcompatible = \"nxp,pca9555\";\n" "+\t\treg = <0x27>;\n" "+\t\tgpio-controller;\n" "+\t\t#gpio-cells = <2>;\n" "+\t};\n" "+\n" - "+\tpca9555_6_20: gpio at 20 {\n" + "+\tpca9555_6_20: gpio@20 {\n" "+\t\tcompatible = \"nxp,pca9555\";\n" "+\t\treg = <0x20>;\n" "+\t\tgpio-controller;\n" @@ -375,7 +388,7 @@ "+\t\t/*B4 12*/\t\"\", \"\", \"\", \"\";\n" "+\t};\n" "+\n" - "+\tpca9555_6_21: gpio at 21 {\n" + "+\tpca9555_6_21: gpio@21 {\n" "+\t\tcompatible = \"nxp,pca9555\";\n" "+\t\treg = <0x21>;\n" "+\t\tgpio-controller;\n" @@ -386,7 +399,7 @@ "+&i2c7 {\n" "+\tstatus = \"okay\";\n" "+\n" - "+\ti2c-mux at 70 {\n" + "+\ti2c-mux@70 {\n" "+\t\tcompatible = \"nxp,pca9546\";\n" "+\t\tstatus = \"okay\";\n" "+\t\treg = <0x70>;\n" @@ -394,54 +407,54 @@ "+\t\t#size-cells = <0>;\n" "+\t\tidle-state = <1>;\n" "+\n" - "+\t\tchannel_9: i2c at 0 {\n" + "+\t\tchannel_9: i2c@0 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <0>;\n" "+\n" - "+\t\t\ttemperature-sensor at 48 {\n" + "+\t\t\ttemperature-sensor@48 {\n" "+\t\t\t\tcompatible = \"ti,tmp75\";\n" "+\t\t\t\treg = <0x48>;\n" "+\t\t\t};\n" "+\n" - "+\t\t\ttemperature-sensor at 49 {\n" + "+\t\t\ttemperature-sensor@49 {\n" "+\t\t\t\tcompatible = \"ti,tmp75\";\n" "+\t\t\t\treg = <0x49>;\n" "+\t\t\t};\n" "+\n" - "+\t\t\tpower-monitor at 40 {\n" + "+\t\t\tpower-monitor@40 {\n" "+\t\t\t\tcompatible = \"ti,ina219\";\n" "+\t\t\t\treg = <0x40>;\n" "+\t\t\t\tshunt-resistor = <2>;\n" "+\t\t\t};\n" "+\n" - "+\t\t\tpower-monitor at 41 {\n" + "+\t\t\tpower-monitor@41 {\n" "+\t\t\t\tcompatible = \"ti,ina219\";\n" "+\t\t\t\treg = <0x41>;\n" "+\t\t\t\tshunt-resistor = <5>;\n" "+\t\t\t};\n" "+\t\t};\n" "+\n" - "+\t\tchannel_10: i2c at 1 {\n" + "+\t\tchannel_10: i2c@1 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <1>;\n" "+\t\t};\n" "+\n" - "+\t\tchannel_11: i2c at 2 {\n" + "+\t\tchannel_11: i2c@2 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <2>;\n" "+\t\t};\n" "+\n" - "+\t\tchannel_12: i2c at 3 {\n" + "+\t\tchannel_12: i2c@3 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <3>;\n" "+\t\t};\n" "+\t};\n" "+\n" - "+\ti2c-mux at 71 {\n" + "+\ti2c-mux@71 {\n" "+\t\tcompatible = \"nxp,pca9546\";\n" "+\t\tstatus = \"okay\";\n" "+\t\treg = <0x71>;\n" @@ -449,25 +462,25 @@ "+\t\t#size-cells = <0>;\n" "+\t\ti2c-mux-idle-disconnect;\n" "+\n" - "+\t\tchannel_13: i2c at 0 {\n" + "+\t\tchannel_13: i2c@0 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <0>;\n" "+\t\t};\n" "+\n" - "+\t\tchannel_14: i2c at 1 {\n" + "+\t\tchannel_14: i2c@1 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <1>;\n" "+\t\t};\n" "+\n" - "+\t\tchannel_15: i2c at 2 {\n" + "+\t\tchannel_15: i2c@2 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <2>;\n" "+\t\t};\n" "+\n" - "+\t\tchannel_16: i2c at 3 {\n" + "+\t\tchannel_16: i2c@3 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <3>;\n" @@ -478,7 +491,7 @@ "+&i2c8 {\n" "+\tstatus = \"okay\";\n" "+\n" - "+\ti2c-mux at 70 {\n" + "+\ti2c-mux@70 {\n" "+\t\tcompatible = \"nxp,pca9546\";\n" "+\t\tstatus = \"okay\";\n" "+\t\treg = <0x70>;\n" @@ -486,36 +499,36 @@ "+\t\t#size-cells = <0>;\n" "+\t\ti2c-mux-idle-disconnect;\n" "+\n" - "+\t\tchannel_17: i2c at 0 {\n" + "+\t\tchannel_17: i2c@0 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <0>;\n" "+\t\t};\n" "+\n" - "+\t\tchannel_18: i2c at 1 {\n" + "+\t\tchannel_18: i2c@1 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <1>;\n" "+\n" - "+\t\t\ttemperature-sensor at 48 {\n" + "+\t\t\ttemperature-sensor@48 {\n" "+\t\t\t\tcompatible = \"ti,tmp75\";\n" "+\t\t\t\treg = <0x48>;\n" "+\t\t\t};\n" "+\n" - "+\t\t\tpower-monitor at 41 {\n" + "+\t\t\tpower-monitor@41 {\n" "+\t\t\t\tcompatible = \"ti,ina219\";\n" "+\t\t\t\treg = <0x41>;\n" "+\t\t\t\tshunt-resistor = <5>;\n" "+\t\t\t};\n" "+\t\t};\n" "+\n" - "+\t\tchannel_19: i2c at 2 {\n" + "+\t\tchannel_19: i2c@2 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <2>;\n" "+\t\t};\n" "+\n" - "+\t\tchannel_20: i2c at 3 {\n" + "+\t\tchannel_20: i2c@3 {\n" "+\t\t\t#address-cells = <1>;\n" "+\t\t\t#size-cells = <0>;\n" "+\t\t\treg = <3>;\n" @@ -539,12 +552,12 @@ "+\tstatus = \"okay\";\n" "+\tmulti-master;\n" "+\n" - "+\teeprom at 50 {\n" + "+\teeprom@50 {\n" "+\t\tcompatible = \"atmel,24c08\";\n" "+\t\treg = <0x50>;\n" "+\t};\n" "+\n" - "+\teeprom at 51 {\n" + "+\teeprom@51 {\n" "+\t\tcompatible = \"atmel,24c08\";\n" "+\t\treg = <0x51>;\n" "+\t};\n" @@ -634,4 +647,4 @@ "-- \n" 2.25.1 -67f5a542c299dc52c90d485034aed29d95bddda55a42fab1f397896f4cb13049 +e3dd4c9d49814a89f50eff013248026ad11f31761143f260025fdeb0edad071a
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.