From: Petr Vorel <pvorel@suse.cz>
To: Alexander Reimelt <alexander.reimelt@posteo.de>
Cc: andersson@kernel.org, konrad.dybcio@linaro.org,
robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
conor+dt@kernel.org, linux-arm-msm@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Subject: Re: [PATCH 2/2] arm64: dts: qcom: Add basic support for LG G4 (H815)
Date: Wed, 3 Apr 2024 20:43:53 +0200 [thread overview]
Message-ID: <20240403184353.GC462665@pevik> (raw)
In-Reply-To: <20240403104415.30636-3-alexander.reimelt@posteo.de>
Hi,
> To make it easier for downstream projects and avoid duplication of work.
> Makes the device bootable and enables all buttons, most regulators, hall sensor, eMMC and SD-Card.
> Signed-off-by: Alexander Reimelt <alexander.reimelt@posteo.de>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> arch/arm64/boot/dts/qcom/msm8992-lg-h815.dts | 422 +++++++++++++++++++
> 2 files changed, 423 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/msm8992-lg-h815.dts
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 7d40ec5e7d21..5b7f8741006f 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -62,6 +62,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8956-sony-xperia-loire-kugo.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8956-sony-xperia-loire-suzu.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-10.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-101.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-h815.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8992-msft-lumia-octagon-talkman.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8992-xiaomi-libra.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8994-huawei-angler-rev-101.dtb
> diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-h815.dts b/arch/arm64/boot/dts/qcom/msm8992-lg-h815.dts
> new file mode 100644
> index 000000000000..b7fa48337e25
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/msm8992-lg-h815.dts
> @@ -0,0 +1,422 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +/*
> + * MSM8992 LG G4 (h815) device tree.
> + *
> + * Copyright (c) 2024, Alexander Reimelt <alexander.reimelt@posteo.de>
> + */
> +
> +/dts-v1/;
> +
> +#include "msm8992.dtsi"
> +#include "pm8994.dtsi"
> +#include "pmi8994.dtsi"
> +#include <dt-bindings/leds/common.h>
> +
> +/* different mapping */
> +/delete-node/ &cont_splash_mem;
> +
> +/* disabled downstream */
> +/delete-node/ &dfps_data_mem;
> +
> +&CPU0 {
> + enable-method = "spin-table";
> +};
> +
> +&CPU1 {
> + enable-method = "spin-table";
> +};
> +
> +&CPU2 {
> + enable-method = "spin-table";
> +};
> +
> +&CPU3 {
> + enable-method = "spin-table";
> +};
> +
> +&CPU4 {
> + enable-method = "spin-table";
> +};
> +
> +&CPU5 {
> + enable-method = "spin-table";
> +};
> +
> +/ {
> + model = "LG G4 (International)";
I'm not sure if " (International)" shouldn't be dropped.
I guess maintainers will know.
> + compatible = "lg,h815", "qcom,msm8992";
> + chassis-type = "handset";
> +
> + qcom,msm-id = <251 0>;
> + qcom,pmic-id = <0x10009 0x1000a 0x00 0x00>;
> + qcom,board-id = <0xb64 0>;
> +
> + /* psci is broken */
> + /delete-node/ psci;
> +
> + chosen {
> + bootargs = "earlycon=tty0 console=tty0";
> + };
> +
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + spin-table@6000000 {
> + reg = <0 0x6000000 0 0x1000>;
> + no-map;
> + };
> +
> + ramoops@ff00000 {
> + compatible = "ramoops";
> + reg = <0x0 0xff00000 0x0 0x100000>;
> + console-size = <0x20000>;
> + pmsg-size = <0x20000>;
> + record-size = <0x10000>;
> + ecc-size = <0x10>;
> + };
> +
> + cont_splash_mem: fb@3400000 {
> + compatible = "framebuffer";
> + reg = <0 0x3400000 0 0xc00000>;
> + no-map;
> + };
> +
> + crash_fb_mem: crash_fb@4000000 {
> + reg = <0 0x4000000 0 0xc00000>;
> + no-map;
> + };
> + };
> +
> + gpio-hall-sensor {
> + compatible = "gpio-keys";
> +
> + pinctrl-0 = <&hall_sensor_default>;
> + pinctrl-names = "default";
> +
> + label = "Hall Effect Sensor";
> +
> + event-hall-sensor {
> + gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
> + label = "hall effect sensor";
> + linux,input-type = <EV_SW>;
> + linux,code = <SW_LID>;
> + linux,can-disable;
> + wakeup-source;
> + };
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> +
> + key-vol-up {
> + label = "volume up";
> + gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_VOLUMEUP>;
> + wakeup-source;
> + debounce-interval = <15>;
> + };
> + };
> +};
> +
> +&pm8994_spmi_regulators {
> + vdd_s8-supply = <&vph_pwr>;
> + vdd_s11-supply = <&vph_pwr>;
> +
> + pm8994_s8: s8 {
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <1180000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + pm8994_s11: s11 {
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <1225000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +};
> +
> +&rpm_requests {
> + regulators-0 {
> + compatible = "qcom,rpm-pm8994-regulators";
> +
> + vdd_s3-supply = <&vph_pwr>;
> + vdd_s4-supply = <&vph_pwr>;
> + vdd_s5-supply = <&vph_pwr>;
> + vdd_s7-supply = <&vph_pwr>;
> + vdd_l1-supply = <&pmi8994_s1>;
> + vdd_l2_26_28-supply = <&pm8994_s3>;
> + vdd_l3_11-supply = <&pm8994_s3>;
> + vdd_l4_27_31-supply = <&pm8994_s3>;
> + vdd_l5_7-supply = <&pm8994_s5>;
> + vdd_l6_12_32-supply = <&pm8994_s5>;
> + vdd_l8_16_30-supply = <&vph_pwr>;
> + vdd_l9_10_18_22-supply = <&pmi8994_bby>;
> + vdd_l13_19_23_24-supply = <&pmi8994_bby>;
> + vdd_l14_15-supply = <&pm8994_s5>;
> + vdd_l17_29-supply = <&pmi8994_bby>;
> + vdd_l20_21-supply = <&pmi8994_bby>;
> + vdd_l25-supply = <&pm8994_s5>;
> + vdd_lvs1_2-supply = <&pm8994_s4>;
> +
> + pm8994_s3: s3 {
> + regulator-min-microvolt = <1300000>;
> + regulator-max-microvolt = <1300000>;
> + };
> +
> + /* sdhc1 vqmmc and bcm */
> + pm8994_s4: s4 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-system-load = <325000>;
> + regulator-allow-set-load;
> + };
> +
> + pm8994_s5: s5 {
> + regulator-min-microvolt = <2150000>;
> + regulator-max-microvolt = <2150000>;
> + };
> +
> + pm8994_s7: s7 {
There are several unused regulators.
I remember Bjorn back at the time suggested [1] me to add only regulators which
are actually needed.
Kind regards,
Petr
[1] https://lore.kernel.org/linux-arm-msm/20230407165730.jfupmfiul6qb7yl3@ripper/
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + };
> +
> + pm8994_l1: l1 {
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + };
> +
> + pm8994_l2: l2 {
> + regulator-min-microvolt = <1250000>;
> + regulator-max-microvolt = <1250000>;
> + regulator-system-load = <10000>;
> + regulator-allow-set-load;
> + };
> +
> + /* camera */
> + pm8994_l3: l3 {
> + regulator-min-microvolt = <1050000>;
> + regulator-max-microvolt = <1050000>;
> + };
> +
> + pm8994_l4: l4 {
> + regulator-min-microvolt = <1225000>;
> + regulator-max-microvolt = <1225000>;
> + };
> +
> + /* L5 is inaccessible from RPM */
> +
> + pm8994_l6: l6 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + /* L7 is inaccessible from RPM */
> +
> + pm8994_l8: l8 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + pm8994_l9: l9 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + /* touch */
> + pm8994_l10: l10 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + pm8994_l11: l11 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + };
> +
> + pm8994_l12: l12 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-system-load = <10000>;
> + regulator-allow-set-load;
> + };
> +
> + /* sdhc2 vqmmc */
> + pm8994_l13: l13 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2950000>;
> + regulator-system-load = <22000>;
> + regulator-allow-set-load;
> + };
> +
> + /* camera */
> + pm8994_l14: l14 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-system-load = <10000>;
> + regulator-allow-set-load;
> + };
> +
> + pm8994_l15: l15 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + pm8994_l16: l16 {
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <2700000>;
> + };
> +
> + /* camera */
> + pm8994_l17: l17 {
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + pm8994_l18: l18 {
> + regulator-min-microvolt = <2850000>;
> + regulator-max-microvolt = <2850000>;
> + };
> +
> + /* LCD */
> + pm8994_l19: l19 {
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + };
> +
> + /* sdhc1 vmmc */
> + pm8994_l20: l20 {
> + regulator-min-microvolt = <2950000>;
> + regulator-max-microvolt = <2950000>;
> + regulator-system-load = <570000>;
> + regulator-allow-set-load;
> + };
> +
> + /* sdhc2 vmmc */
> + pm8994_l21: l21 {
> + regulator-min-microvolt = <2950000>;
> + regulator-max-microvolt = <2950000>;
> + regulator-system-load = <800000>;
> + regulator-allow-set-load;
> + };
> +
> + /* touch */
> + pm8994_l22: l22 {
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + };
> +
> + /* camera */
> + pm8994_l23: l23 {
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + pm8994_l24: l24 {
> + regulator-min-microvolt = <3075000>;
> + regulator-max-microvolt = <3150000>;
> + };
> +
> + /* IRRC */
> + pm8994_l25: l25 {
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + };
> +
> + pm8994_l26: l26 {
> + regulator-min-microvolt = <987500>;
> + regulator-max-microvolt = <987500>;
> + };
> +
> + /* hdmi */
> + pm8994_l27: l27 {
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + };
> +
> + pm8994_l28: l28 {
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-system-load = <10000>;
> + regulator-allow-set-load;
> + };
> +
> + /* camera */
> + pm8994_l29: l29 {
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + /* camera */
> + pm8994_l30: l30 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + pm8994_l31: l31 {
> + regulator-min-microvolt = <1262500>;
> + regulator-max-microvolt = <1262500>;
> + };
> +
> + pm8994_l32: l32 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + pm8994_lvs1: lvs1 {};
> +
> + pm8994_lvs2: lvs2 {};
> + };
> +
> + regulators-1 {
> + compatible = "qcom,rpm-pmi8994-regulators";
> +
> + vdd_s1-supply = <&vph_pwr>;
> + vdd_bst_byp-supply = <&vph_pwr>;
> +
> + pmi8994_s1: s1 {
> + regulator-min-microvolt = <1025000>;
> + regulator-max-microvolt = <1025000>;
> + };
> +
> + /* S2 & S3 - VDD_GFX */
> +
> + pmi8994_bby: boost-bypass {
> + regulator-min-microvolt = <3150000>;
> + regulator-max-microvolt = <3600000>;
> + };
> + };
> +};
> +
> +&pm8994_resin {
> + status = "okay";
> + linux,code = <KEY_VOLUMEDOWN>;
> +};
> +
> +&sdhc1 {
> + status = "okay";
> + mmc-hs400-1_8v;
> + vmmc-supply = <&pm8994_l20>;
> + vqmmc-supply = <&pm8994_s4>;
> + non-removable;
> +};
> +
> +&sdhc2 {
> + status = "okay";
> + vmmc-supply = <&pm8994_l21>;
> + vqmmc-supply = <&pm8994_l13>;
> + cd-gpios = <&pm8994_gpios 8 GPIO_ACTIVE_LOW>;
> +};
> +
> +&tlmm {
> + hall_sensor_default: hall-sensor-default-state {
> + pins = "gpio75";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +};
next prev parent reply other threads:[~2024-04-03 18:44 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-03 10:43 [PATCH 0/2] arm64: Add basic support for LG H815 Alexander Reimelt
2024-04-03 10:43 ` [PATCH 1/2] dt-bindings: arm: qcom: Add LG G4 (h815) Alexander Reimelt
2024-04-03 17:16 ` Rob Herring
2024-04-03 17:55 ` Petr Vorel
2024-04-03 10:43 ` [PATCH 2/2] arm64: dts: qcom: Add basic support for LG G4 (H815) Alexander Reimelt
2024-04-03 10:57 ` Dmitry Baryshkov
2024-04-03 17:37 ` Krzysztof Kozlowski
2024-04-03 17:59 ` Petr Vorel
2024-04-03 18:43 ` Petr Vorel [this message]
2024-04-03 14:15 ` [PATCH 0/2] arm64: Add basic support for LG H815 Rob Herring
2024-05-30 13:57 ` [PATCH v2 " Alexander Reimelt
2024-05-30 13:57 ` [PATCH v2 1/2] dt-bindings: arm: qcom: Add LG G4 (h815) Alexander Reimelt
2024-05-30 14:49 ` Petr Vorel
2024-05-31 8:17 ` Krzysztof Kozlowski
2024-05-30 13:57 ` [PATCH v2 2/2] arm64: dts: qcom: msm8992-lg-h815: Initial support for LG G4 (H815) Alexander Reimelt
2024-06-18 13:32 ` Konrad Dybcio
2024-05-30 16:54 ` [PATCH v2 0/2] arm64: Add basic support for LG H815 Dmitry Baryshkov
2024-06-04 15:28 ` Rob Herring (Arm)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240403184353.GC462665@pevik \
--to=pvorel@suse.cz \
--cc=alexander.reimelt@posteo.de \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.