From: "Marek Behún" <kabel@kernel.org>
To: Stefan Roese <sr@denx.de>
Cc: u-boot@lists.denx.de, "Marek Behún" <kabel@kernel.org>
Subject: [PATCH u-boot-mvebu v4 00/18] Turris Omnia - New board revision support
Date: Thu, 4 Apr 2024 09:50:49 +0200 [thread overview]
Message-ID: <20240404075107.19636-1-kabel@kernel.org> (raw)
changes since v3:
- added missing files turris_common.c and turris_common.h to patch 05/18
- added comment to patch 11/18 before while (1); as discussed in v3
v1, v2 and v3 at:
https://patchwork.ozlabs.org/project/uboot/cover/20240304152148.3847-1-kabel@kernel.org/
https://patchwork.ozlabs.org/project/uboot/cover/20240323180711.5498-1-kabel@kernel.org/
https://patchwork.ozlabs.org/project/uboot/cover/20240327162355.24584-1-kabel@kernel.org/
Marek Behún (18):
arm: mvebu: turris_omnia: Enable LTO by default on Turris Omnia
arm: mvebu: turris_omnia: Add header containing MCU command interface
and use it
arm: mvebu: turris_{omnia, mox}: Don't print model two times
arm: mvebu: turris_omnia: Update MCU status and features reading
arm: mvebu: turris_omnia: Implement getting board information from MCU
arm: mvebu: turris_omnia: Print board ECDSA public key if available
arm: mvebu: turris_omnia: Disable Atmel SHA node if not present
arm: mvebu: spl: Do not build mvebu-reset in SPL
arm: mvebu: system-controller: Rework to use UCLASS_SYSCON
arm: mvebu: system-controller: Select mvebu-reset if DM_RESET &&
PCI_MVEBU
arm: mvebu: system-controller: Add support for SYSRESET
gpio: turris_omnia_mcu: Use byteorder conversion functions
gpio: turris_omnia_mcu: Update firmware features reading
gpio: turris_omnia_mcu: Add support for system power off via sysreset
arm: mvebu: turris_omnia: Enable poweroff command via sysreset in
defconfig
cmd: rng: Print "Abort" on -EINTR
misc: turris_omnia_mcu: Add support for rng provided by MCU
arm: mvebu: turris_omnia: Enable rng command in defconfig
arch/arm/mach-mvebu/Kconfig | 25 ++
arch/arm/mach-mvebu/Makefile | 3 +-
arch/arm/mach-mvebu/cpu.c | 2 +
arch/arm/mach-mvebu/system-controller.c | 145 ++++++--
board/CZ.NIC/turris_atsha_otp.c | 27 +-
board/CZ.NIC/turris_common.c | 42 +++
board/CZ.NIC/turris_common.h | 10 +
board/CZ.NIC/turris_mox/turris_mox.c | 5 +-
board/CZ.NIC/turris_omnia/Makefile | 2 +-
board/CZ.NIC/turris_omnia/turris_omnia.c | 310 ++++++++++++-----
cmd/rng.c | 7 +-
configs/turris_omnia_defconfig | 6 +
drivers/gpio/Kconfig | 7 -
drivers/gpio/Makefile | 1 -
drivers/gpio/turris_omnia_mcu.c | 316 -----------------
drivers/misc/Kconfig | 11 +
drivers/misc/Makefile | 1 +
drivers/misc/turris_omnia_mcu.c | 411 +++++++++++++++++++++++
include/turris-omnia-mcu-interface.h | 248 ++++++++++++++
19 files changed, 1097 insertions(+), 482 deletions(-)
create mode 100644 board/CZ.NIC/turris_common.c
create mode 100644 board/CZ.NIC/turris_common.h
delete mode 100644 drivers/gpio/turris_omnia_mcu.c
create mode 100644 drivers/misc/turris_omnia_mcu.c
create mode 100644 include/turris-omnia-mcu-interface.h
--
2.43.2
next reply other threads:[~2024-04-04 7:51 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-04 7:50 Marek Behún [this message]
2024-04-04 7:50 ` [PATCH u-boot-mvebu v4 01/18] arm: mvebu: turris_omnia: Enable LTO by default on Turris Omnia Marek Behún
2024-04-04 7:50 ` [PATCH u-boot-mvebu v4 02/18] arm: mvebu: turris_omnia: Add header containing MCU command interface and use it Marek Behún
2024-04-04 7:50 ` [PATCH u-boot-mvebu v4 03/18] arm: mvebu: turris_{omnia, mox}: Don't print model two times Marek Behún
2024-04-04 7:50 ` [PATCH u-boot-mvebu v4 04/18] arm: mvebu: turris_omnia: Update MCU status and features reading Marek Behún
2024-04-04 7:50 ` [PATCH u-boot-mvebu v4 05/18] arm: mvebu: turris_omnia: Implement getting board information from MCU Marek Behún
2024-04-04 7:50 ` [PATCH u-boot-mvebu v4 06/18] arm: mvebu: turris_omnia: Print board ECDSA public key if available Marek Behún
2024-04-04 7:50 ` [PATCH u-boot-mvebu v4 07/18] arm: mvebu: turris_omnia: Disable Atmel SHA node if not present Marek Behún
2024-04-04 7:50 ` [PATCH u-boot-mvebu v4 08/18] arm: mvebu: spl: Do not build mvebu-reset in SPL Marek Behún
2024-04-04 7:50 ` [PATCH u-boot-mvebu v4 09/18] arm: mvebu: system-controller: Rework to use UCLASS_SYSCON Marek Behún
2024-04-04 7:50 ` [PATCH u-boot-mvebu v4 10/18] arm: mvebu: system-controller: Select mvebu-reset if DM_RESET && PCI_MVEBU Marek Behún
2024-04-04 7:51 ` [PATCH u-boot-mvebu v4 11/18] arm: mvebu: system-controller: Add support for SYSRESET Marek Behún
2024-04-04 7:51 ` [PATCH u-boot-mvebu v4 12/18] gpio: turris_omnia_mcu: Use byteorder conversion functions Marek Behún
2024-04-04 7:51 ` [PATCH u-boot-mvebu v4 13/18] gpio: turris_omnia_mcu: Update firmware features reading Marek Behún
2024-04-04 7:51 ` [PATCH u-boot-mvebu v4 14/18] gpio: turris_omnia_mcu: Add support for system power off via sysreset Marek Behún
2024-04-04 7:51 ` [PATCH u-boot-mvebu v4 15/18] arm: mvebu: turris_omnia: Enable poweroff command via sysreset in defconfig Marek Behún
2024-04-04 7:51 ` [PATCH u-boot-mvebu v4 16/18] cmd: rng: Print "Abort" on -EINTR Marek Behún
2024-04-04 7:51 ` [PATCH u-boot-mvebu v4 17/18] misc: turris_omnia_mcu: Add support for rng provided by MCU Marek Behún
2024-04-04 7:51 ` [PATCH u-boot-mvebu v4 18/18] arm: mvebu: turris_omnia: Enable rng command in defconfig Marek Behún
2024-04-04 12:04 ` [PATCH u-boot-mvebu v4 00/18] Turris Omnia - New board revision support Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240404075107.19636-1-kabel@kernel.org \
--to=kabel@kernel.org \
--cc=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.