From: Thomas Huth <thuth@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Richard Henderson" <richard.henderson@linaro.org>,
"Inès Varhol" <ines.varhol@telecom-paris.fr>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Ninad Palsule" <ninad@linux.ibm.com>
Subject: [PULL 02/17] tests/qtest : Use `g_assert_cmphex` instead of `g_assert_cmpuint`
Date: Wed, 24 Apr 2024 09:57:20 +0200 [thread overview]
Message-ID: <20240424075735.248041-3-thuth@redhat.com> (raw)
In-Reply-To: <20240424075735.248041-1-thuth@redhat.com>
From: Inès Varhol <ines.varhol@telecom-paris.fr>
The messages for assertions using hexadecimal numbers will be
easier to understand with `g_assert_cmphex`.
Cases changed : "cmpuint.*0x", "cmpuint.*<<"
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Message-ID: <20240414173349.31194-1-ines.varhol@telecom-paris.fr>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
tests/qtest/aspeed_fsi-test.c | 20 ++--
tests/qtest/cmsdk-apb-dualtimer-test.c | 2 +-
tests/qtest/cmsdk-apb-watchdog-test.c | 2 +-
tests/qtest/erst-test.c | 2 +-
tests/qtest/ivshmem-test.c | 10 +-
tests/qtest/libqos/ahci.c | 4 +-
tests/qtest/microbit-test.c | 46 ++++-----
tests/qtest/sse-timer-test.c | 4 +-
tests/qtest/stm32l4x5_exti-test.c | 138 ++++++++++++-------------
tests/qtest/stm32l4x5_syscfg-test.c | 74 ++++++-------
10 files changed, 151 insertions(+), 151 deletions(-)
diff --git a/tests/qtest/aspeed_fsi-test.c b/tests/qtest/aspeed_fsi-test.c
index b3020dd821..f5ab269972 100644
--- a/tests/qtest/aspeed_fsi-test.c
+++ b/tests/qtest/aspeed_fsi-test.c
@@ -63,22 +63,22 @@ static void test_fsi_setup(QTestState *s, uint32_t base_addr)
/* Unselect FSI1 */
aspeed_fsi_writel(s, ASPEED_FSI_OPB1_BUS_SELECT, 0x0);
curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB1_BUS_SELECT);
- g_assert_cmpuint(curval, ==, 0x0);
+ g_assert_cmphex(curval, ==, 0x0);
/* Select FSI0 */
aspeed_fsi_writel(s, ASPEED_FSI_OPB0_BUS_SELECT, 0x1);
curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB0_BUS_SELECT);
- g_assert_cmpuint(curval, ==, 0x1);
+ g_assert_cmphex(curval, ==, 0x1);
} else if (base_addr == AST2600_OPB_FSI1_BASE_ADDR) {
/* Unselect FSI0 */
aspeed_fsi_writel(s, ASPEED_FSI_OPB0_BUS_SELECT, 0x0);
curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB0_BUS_SELECT);
- g_assert_cmpuint(curval, ==, 0x0);
+ g_assert_cmphex(curval, ==, 0x0);
/* Select FSI1 */
aspeed_fsi_writel(s, ASPEED_FSI_OPB1_BUS_SELECT, 0x1);
curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB1_BUS_SELECT);
- g_assert_cmpuint(curval, ==, 0x1);
+ g_assert_cmphex(curval, ==, 0x1);
} else {
g_assert_not_reached();
}
@@ -145,11 +145,11 @@ static void test_fsi0_getcfam_addr0(const void *data)
aspeed_fsi_writel(s, ASPEED_FSI_ENGINER_TRIGGER, 0x1);
curval = aspeed_fsi_readl(s, ASPEED_FSI_INTRRUPT_STATUS);
- g_assert_cmpuint(curval, ==, 0x10000);
+ g_assert_cmphex(curval, ==, 0x10000);
curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB0_BUS_STATUS);
- g_assert_cmpuint(curval, ==, 0x0);
+ g_assert_cmphex(curval, ==, 0x0);
curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB0_READ_DATA);
- g_assert_cmpuint(curval, ==, 0x152d02c0);
+ g_assert_cmphex(curval, ==, 0x152d02c0);
}
static void test_fsi1_getcfam_addr0(const void *data)
@@ -168,11 +168,11 @@ static void test_fsi1_getcfam_addr0(const void *data)
aspeed_fsi_writel(s, ASPEED_FSI_ENGINER_TRIGGER, 0x1);
curval = aspeed_fsi_readl(s, ASPEED_FSI_INTRRUPT_STATUS);
- g_assert_cmpuint(curval, ==, 0x20000);
+ g_assert_cmphex(curval, ==, 0x20000);
curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB1_BUS_STATUS);
- g_assert_cmpuint(curval, ==, 0x0);
+ g_assert_cmphex(curval, ==, 0x0);
curval = aspeed_fsi_readl(s, ASPEED_FSI_OPB1_READ_DATA);
- g_assert_cmpuint(curval, ==, 0x152d02c0);
+ g_assert_cmphex(curval, ==, 0x152d02c0);
}
int main(int argc, char **argv)
diff --git a/tests/qtest/cmsdk-apb-dualtimer-test.c b/tests/qtest/cmsdk-apb-dualtimer-test.c
index ad6a758289..3b89bed97d 100644
--- a/tests/qtest/cmsdk-apb-dualtimer-test.c
+++ b/tests/qtest/cmsdk-apb-dualtimer-test.c
@@ -69,7 +69,7 @@ static void test_dualtimer(void)
* tick VALUE should have wrapped round to 0xffff.
*/
clock_step(40);
- g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 0xffff);
+ g_assert_cmphex(readl(TIMER_BASE + TIMER1VALUE), ==, 0xffff);
/* Check that any write to INTCLR clears interrupt */
writel(TIMER_BASE + TIMER1INTCLR, 1);
diff --git a/tests/qtest/cmsdk-apb-watchdog-test.c b/tests/qtest/cmsdk-apb-watchdog-test.c
index 2710cb17b8..00b5dbbc81 100644
--- a/tests/qtest/cmsdk-apb-watchdog-test.c
+++ b/tests/qtest/cmsdk-apb-watchdog-test.c
@@ -88,7 +88,7 @@ static void test_clock_change(void)
/* Rewrite RCC.SYSDIV from 16 to 8, so the clock is now 40ns per tick */
rcc = readl(SSYS_BASE + RCC);
- g_assert_cmpuint(extract32(rcc, SYSDIV_SHIFT, SYSDIV_LENGTH), ==, 0xf);
+ g_assert_cmphex(extract32(rcc, SYSDIV_SHIFT, SYSDIV_LENGTH), ==, 0xf);
rcc = deposit32(rcc, SYSDIV_SHIFT, SYSDIV_LENGTH, 7);
writel(SSYS_BASE + RCC, rcc);
diff --git a/tests/qtest/erst-test.c b/tests/qtest/erst-test.c
index c45bee7f05..36bbe122ab 100644
--- a/tests/qtest/erst-test.c
+++ b/tests/qtest/erst-test.c
@@ -109,7 +109,7 @@ static void setup_vm_cmd(ERSTState *s, const char *cmd)
g_assert_cmpuint(s->reg_barsize, ==, 16);
s->mem_bar = qpci_iomap(s->dev, 1, &s->mem_barsize);
- g_assert_cmpuint(s->mem_barsize, ==, 0x2000);
+ g_assert_cmphex(s->mem_barsize, ==, 0x2000);
qpci_device_enable(s->dev);
}
diff --git a/tests/qtest/ivshmem-test.c b/tests/qtest/ivshmem-test.c
index 9bf8e78df6..fb45fdeb07 100644
--- a/tests/qtest/ivshmem-test.c
+++ b/tests/qtest/ivshmem-test.c
@@ -158,7 +158,7 @@ static void test_ivshmem_single(void)
/* trigger interrupt via registers */
out_reg(s, INTRMASK, 0xffffffff);
- g_assert_cmpuint(in_reg(s, INTRMASK), ==, 0xffffffff);
+ g_assert_cmphex(in_reg(s, INTRMASK), ==, 0xffffffff);
out_reg(s, INTRSTATUS, 1);
/* check interrupt status */
g_assert_cmpuint(in_reg(s, INTRSTATUS), ==, 1);
@@ -211,11 +211,11 @@ static void test_ivshmem_pair(void)
memset(tmpshmem, 0x42, TMPSHMSIZE);
read_mem(s1, 0, data, TMPSHMSIZE);
for (i = 0; i < TMPSHMSIZE; i++) {
- g_assert_cmpuint(data[i], ==, 0x42);
+ g_assert_cmphex(data[i], ==, 0x42);
}
read_mem(s2, 0, data, TMPSHMSIZE);
for (i = 0; i < TMPSHMSIZE; i++) {
- g_assert_cmpuint(data[i], ==, 0x42);
+ g_assert_cmphex(data[i], ==, 0x42);
}
/* guest 1 write, guest 2 read */
@@ -224,7 +224,7 @@ static void test_ivshmem_pair(void)
memset(data, 0, TMPSHMSIZE);
read_mem(s2, 0, data, TMPSHMSIZE);
for (i = 0; i < TMPSHMSIZE; i++) {
- g_assert_cmpuint(data[i], ==, 0x43);
+ g_assert_cmphex(data[i], ==, 0x43);
}
/* guest 2 write, guest 1 read */
@@ -233,7 +233,7 @@ static void test_ivshmem_pair(void)
memset(data, 0, TMPSHMSIZE);
read_mem(s1, 0, data, TMPSHMSIZE);
for (i = 0; i < TMPSHMSIZE; i++) {
- g_assert_cmpuint(data[i], ==, 0x44);
+ g_assert_cmphex(data[i], ==, 0x44);
}
cleanup_vm(s1);
diff --git a/tests/qtest/libqos/ahci.c b/tests/qtest/libqos/ahci.c
index 6d59c7551a..34a75b7f43 100644
--- a/tests/qtest/libqos/ahci.c
+++ b/tests/qtest/libqos/ahci.c
@@ -1046,7 +1046,7 @@ static void ahci_atapi_command_set_offset(AHCICommand *cmd, uint64_t lba)
case CMD_ATAPI_REQUEST_SENSE:
case CMD_ATAPI_TEST_UNIT_READY:
case CMD_ATAPI_START_STOP_UNIT:
- g_assert_cmpuint(lba, ==, 0x00);
+ g_assert_cmphex(lba, ==, 0x00);
break;
default:
/* SCSI doesn't have uniform packet formats,
@@ -1109,7 +1109,7 @@ static void ahci_atapi_set_size(AHCICommand *cmd, uint64_t xbytes)
break;
case CMD_ATAPI_READ_CD:
/* 24bit BE store */
- g_assert_cmpuint(nsectors, <, 1ULL << 24);
+ g_assert_cmphex(nsectors, <, 1ULL << 24);
tmp = nsectors;
cbd[6] = (tmp & 0xFF0000) >> 16;
cbd[7] = (tmp & 0xFF00) >> 8;
diff --git a/tests/qtest/microbit-test.c b/tests/qtest/microbit-test.c
index 72190d38f7..505c831f13 100644
--- a/tests/qtest/microbit-test.c
+++ b/tests/qtest/microbit-test.c
@@ -143,14 +143,14 @@ static void test_microbit_i2c(void)
/* MMA8653 magnetometer detection */
val = i2c_read_byte(qts, 0x3A, 0x0D);
- g_assert_cmpuint(val, ==, 0x5A);
+ g_assert_cmphex(val, ==, 0x5A);
val = i2c_read_byte(qts, 0x3A, 0x0D);
- g_assert_cmpuint(val, ==, 0x5A);
+ g_assert_cmphex(val, ==, 0x5A);
/* LSM303 accelerometer detection */
val = i2c_read_byte(qts, 0x3C, 0x4F);
- g_assert_cmpuint(val, ==, 0x40);
+ g_assert_cmphex(val, ==, 0x40);
qtest_writel(qts, NRF51_TWI_BASE + NRF51_TWI_REG_ENABLE, 0);
@@ -171,7 +171,7 @@ static void fill_and_erase(QTestState *qts, hwaddr base, hwaddr size,
/* Check memory */
for (i = 0; i < size / 4; i++) {
- g_assert_cmpuint(qtest_readl(qts, base + i * 4), ==, 0xFFFFFFFF);
+ g_assert_cmphex(qtest_readl(qts, base + i * 4), ==, 0xFFFFFFFF);
}
/* Fill memory */
@@ -191,7 +191,7 @@ static void test_nrf51_nvmc(void)
/* Test always ready */
value = qtest_readl(qts, NRF51_NVMC_BASE + NRF51_NVMC_READY);
- g_assert_cmpuint(value & 0x01, ==, 0x01);
+ g_assert_cmphex(value & 0x01, ==, 0x01);
/* Test write-read config register */
qtest_writel(qts, NRF51_NVMC_BASE + NRF51_NVMC_CONFIG, 0x03);
@@ -302,19 +302,19 @@ static void test_nrf51_gpio(void)
g_assert_cmpuint(actual, ==, expected);
actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START)
& 0x01;
- g_assert_cmpuint(actual, ==, 0x01);
+ g_assert_cmphex(actual, ==, 0x01);
actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_END) & 0x01;
- g_assert_cmpuint(actual, ==, 0x01);
+ g_assert_cmphex(actual, ==, 0x01);
/* Check clear via DIRCLR */
qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_DIRCLR, 0x80000001);
actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_DIR);
- g_assert_cmpuint(actual, ==, 0x00000000);
+ g_assert_cmphex(actual, ==, 0x00000000);
actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START)
& 0x01;
- g_assert_cmpuint(actual, ==, 0x00);
+ g_assert_cmphex(actual, ==, 0x00);
actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_END) & 0x01;
- g_assert_cmpuint(actual, ==, 0x00);
+ g_assert_cmphex(actual, ==, 0x00);
/* Check set via DIR */
expected = 0x80000001;
@@ -323,9 +323,9 @@ static void test_nrf51_gpio(void)
g_assert_cmpuint(actual, ==, expected);
actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START)
& 0x01;
- g_assert_cmpuint(actual, ==, 0x01);
+ g_assert_cmphex(actual, ==, 0x01);
actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_END) & 0x01;
- g_assert_cmpuint(actual, ==, 0x01);
+ g_assert_cmphex(actual, ==, 0x01);
/* Reset DIR */
qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_DIR, 0x00000000);
@@ -334,33 +334,33 @@ static void test_nrf51_gpio(void)
qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0x00);
qtest_set_irq_in(qts, "/machine/nrf51", "unnamed-gpio-in", 0, 0);
actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
- g_assert_cmpuint(actual, ==, 0x00);
+ g_assert_cmphex(actual, ==, 0x00);
qtest_set_irq_in(qts, "/machine/nrf51", "unnamed-gpio-in", 0, 1);
actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
- g_assert_cmpuint(actual, ==, 0x01);
+ g_assert_cmphex(actual, ==, 0x01);
qtest_set_irq_in(qts, "/machine/nrf51", "unnamed-gpio-in", 0, -1);
actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
- g_assert_cmpuint(actual, ==, 0x01);
+ g_assert_cmphex(actual, ==, 0x01);
qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0x02);
/* Check pull-up working */
qtest_set_irq_in(qts, "/machine/nrf51", "unnamed-gpio-in", 0, 0);
qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b0000);
actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
- g_assert_cmpuint(actual, ==, 0x00);
+ g_assert_cmphex(actual, ==, 0x00);
qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b1110);
actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
- g_assert_cmpuint(actual, ==, 0x01);
+ g_assert_cmphex(actual, ==, 0x01);
qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0x02);
/* Check pull-down working */
qtest_set_irq_in(qts, "/machine/nrf51", "unnamed-gpio-in", 0, 1);
qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b0000);
actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
- g_assert_cmpuint(actual, ==, 0x01);
+ g_assert_cmphex(actual, ==, 0x01);
qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b0110);
actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
- g_assert_cmpuint(actual, ==, 0x00);
+ g_assert_cmphex(actual, ==, 0x00);
qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0x02);
qtest_set_irq_in(qts, "/machine/nrf51", "unnamed-gpio-in", 0, -1);
@@ -376,11 +376,11 @@ static void test_nrf51_gpio(void)
qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_CNF_START, 0b01);
qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_OUTSET, 0x01);
actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
- g_assert_cmpuint(actual, ==, 0x01);
+ g_assert_cmphex(actual, ==, 0x01);
qtest_writel(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_OUTCLR, 0x01);
actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_IN) & 0x01;
- g_assert_cmpuint(actual, ==, 0x00);
+ g_assert_cmphex(actual, ==, 0x00);
/*
* Check short-circuit - generates an guest_error which must be checked
@@ -410,7 +410,7 @@ static void test_nrf51_gpio_detect(void)
/* Set pin high */
qtest_set_irq_in(qts, "/machine/nrf51", "unnamed-gpio-in", i, 1);
uint32_t actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_IN);
- g_assert_cmpuint(actual, ==, 1 << i);
+ g_assert_cmphex(actual, ==, 1 << i);
/* Check that DETECT is high */
g_assert_true(qtest_get_irq(qts, 0));
@@ -418,7 +418,7 @@ static void test_nrf51_gpio_detect(void)
/* Set pin low, check that DETECT goes low. */
qtest_set_irq_in(qts, "/machine/nrf51", "unnamed-gpio-in", i, 0);
actual = qtest_readl(qts, NRF51_GPIO_BASE + NRF51_GPIO_REG_IN);
- g_assert_cmpuint(actual, ==, 0x0);
+ g_assert_cmphex(actual, ==, 0x0);
g_assert_false(qtest_get_irq(qts, 0));
}
diff --git a/tests/qtest/sse-timer-test.c b/tests/qtest/sse-timer-test.c
index a65d7542d5..fd5635d4c9 100644
--- a/tests/qtest/sse-timer-test.c
+++ b/tests/qtest/sse-timer-test.c
@@ -181,12 +181,12 @@ static void test_timer(void)
writel(TIMER_BASE + CNTP_AIVAL_CTL, 0);
clock_step_ticks(0x42ULL << 32);
g_assert_cmpuint(readl(TIMER_BASE + CNTPCT_LO), ==, 4400);
- g_assert_cmpuint(readl(TIMER_BASE + CNTPCT_HI), ==, 0x42);
+ g_assert_cmphex(readl(TIMER_BASE + CNTPCT_HI), ==, 0x42);
/* Turn on the autoinc again to check AIVAL_HI */
writel(TIMER_BASE + CNTP_AIVAL_CTL, 1);
g_assert_cmpuint(readl(TIMER_BASE + CNTP_AIVAL_LO), ==, 4600);
- g_assert_cmpuint(readl(TIMER_BASE + CNTP_AIVAL_HI), ==, 0x42);
+ g_assert_cmphex(readl(TIMER_BASE + CNTP_AIVAL_HI), ==, 0x42);
}
static void test_timer_scale_change(void)
diff --git a/tests/qtest/stm32l4x5_exti-test.c b/tests/qtest/stm32l4x5_exti-test.c
index 81830be8ae..7092860b9b 100644
--- a/tests/qtest/stm32l4x5_exti-test.c
+++ b/tests/qtest/stm32l4x5_exti-test.c
@@ -70,44 +70,44 @@ static void test_reg_write_read(void)
/* Test that non-reserved bits in xMR and xTSR can be set and cleared */
exti_writel(EXTI_IMR1, 0xFFFFFFFF);
- g_assert_cmpuint(exti_readl(EXTI_IMR1), ==, 0xFFFFFFFF);
+ g_assert_cmphex(exti_readl(EXTI_IMR1), ==, 0xFFFFFFFF);
exti_writel(EXTI_IMR1, 0x00000000);
- g_assert_cmpuint(exti_readl(EXTI_IMR1), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_IMR1), ==, 0x00000000);
exti_writel(EXTI_EMR1, 0xFFFFFFFF);
- g_assert_cmpuint(exti_readl(EXTI_EMR1), ==, 0xFFFFFFFF);
+ g_assert_cmphex(exti_readl(EXTI_EMR1), ==, 0xFFFFFFFF);
exti_writel(EXTI_EMR1, 0x00000000);
- g_assert_cmpuint(exti_readl(EXTI_EMR1), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_EMR1), ==, 0x00000000);
exti_writel(EXTI_RTSR1, 0xFFFFFFFF);
- g_assert_cmpuint(exti_readl(EXTI_RTSR1), ==, 0x007DFFFF);
+ g_assert_cmphex(exti_readl(EXTI_RTSR1), ==, 0x007DFFFF);
exti_writel(EXTI_RTSR1, 0x00000000);
- g_assert_cmpuint(exti_readl(EXTI_RTSR1), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_RTSR1), ==, 0x00000000);
exti_writel(EXTI_FTSR1, 0xFFFFFFFF);
- g_assert_cmpuint(exti_readl(EXTI_FTSR1), ==, 0x007DFFFF);
+ g_assert_cmphex(exti_readl(EXTI_FTSR1), ==, 0x007DFFFF);
exti_writel(EXTI_FTSR1, 0x00000000);
- g_assert_cmpuint(exti_readl(EXTI_FTSR1), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_FTSR1), ==, 0x00000000);
exti_writel(EXTI_IMR2, 0xFFFFFFFF);
- g_assert_cmpuint(exti_readl(EXTI_IMR2), ==, 0x000000FF);
+ g_assert_cmphex(exti_readl(EXTI_IMR2), ==, 0x000000FF);
exti_writel(EXTI_IMR2, 0x00000000);
- g_assert_cmpuint(exti_readl(EXTI_IMR2), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_IMR2), ==, 0x00000000);
exti_writel(EXTI_EMR2, 0xFFFFFFFF);
- g_assert_cmpuint(exti_readl(EXTI_EMR2), ==, 0x000000FF);
+ g_assert_cmphex(exti_readl(EXTI_EMR2), ==, 0x000000FF);
exti_writel(EXTI_EMR2, 0x00000000);
- g_assert_cmpuint(exti_readl(EXTI_EMR2), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_EMR2), ==, 0x00000000);
exti_writel(EXTI_RTSR2, 0xFFFFFFFF);
- g_assert_cmpuint(exti_readl(EXTI_RTSR2), ==, 0x00000078);
+ g_assert_cmphex(exti_readl(EXTI_RTSR2), ==, 0x00000078);
exti_writel(EXTI_RTSR2, 0x00000000);
- g_assert_cmpuint(exti_readl(EXTI_RTSR2), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_RTSR2), ==, 0x00000000);
exti_writel(EXTI_FTSR2, 0xFFFFFFFF);
- g_assert_cmpuint(exti_readl(EXTI_FTSR2), ==, 0x00000078);
+ g_assert_cmphex(exti_readl(EXTI_FTSR2), ==, 0x00000078);
exti_writel(EXTI_FTSR2, 0x00000000);
- g_assert_cmpuint(exti_readl(EXTI_FTSR2), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_FTSR2), ==, 0x00000000);
}
static void test_direct_lines_write(void)
@@ -115,28 +115,28 @@ static void test_direct_lines_write(void)
/* Test that direct lines reserved bits are not written to */
exti_writel(EXTI_RTSR1, 0xFF820000);
- g_assert_cmpuint(exti_readl(EXTI_RTSR1), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_RTSR1), ==, 0x00000000);
exti_writel(EXTI_FTSR1, 0xFF820000);
- g_assert_cmpuint(exti_readl(EXTI_FTSR1), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_FTSR1), ==, 0x00000000);
exti_writel(EXTI_SWIER1, 0xFF820000);
- g_assert_cmpuint(exti_readl(EXTI_SWIER1), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_SWIER1), ==, 0x00000000);
exti_writel(EXTI_PR1, 0xFF820000);
- g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
exti_writel(EXTI_RTSR2, 0x00000087);
- g_assert_cmpuint(exti_readl(EXTI_RTSR2), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_RTSR2), ==, 0x00000000);
exti_writel(EXTI_FTSR2, 0x00000087);
- g_assert_cmpuint(exti_readl(EXTI_FTSR2), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_FTSR2), ==, 0x00000000);
exti_writel(EXTI_SWIER2, 0x00000087);
- g_assert_cmpuint(exti_readl(EXTI_SWIER2), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_SWIER2), ==, 0x00000000);
exti_writel(EXTI_PR2, 0x00000087);
- g_assert_cmpuint(exti_readl(EXTI_PR2), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_PR2), ==, 0x00000000);
}
static void test_reserved_bits_write(void)
@@ -144,22 +144,22 @@ static void test_reserved_bits_write(void)
/* Test that reserved bits stay are not written to */
exti_writel(EXTI_IMR2, 0xFFFFFF00);
- g_assert_cmpuint(exti_readl(EXTI_IMR2), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_IMR2), ==, 0x00000000);
exti_writel(EXTI_EMR2, 0xFFFFFF00);
- g_assert_cmpuint(exti_readl(EXTI_EMR2), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_EMR2), ==, 0x00000000);
exti_writel(EXTI_RTSR2, 0xFFFFFF00);
- g_assert_cmpuint(exti_readl(EXTI_RTSR2), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_RTSR2), ==, 0x00000000);
exti_writel(EXTI_FTSR2, 0xFFFFFF00);
- g_assert_cmpuint(exti_readl(EXTI_FTSR2), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_FTSR2), ==, 0x00000000);
exti_writel(EXTI_SWIER2, 0xFFFFFF00);
- g_assert_cmpuint(exti_readl(EXTI_SWIER2), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_SWIER2), ==, 0x00000000);
exti_writel(EXTI_PR2, 0xFFFFFF00);
- g_assert_cmpuint(exti_readl(EXTI_PR2), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_PR2), ==, 0x00000000);
}
static void test_software_interrupt(void)
@@ -180,7 +180,7 @@ static void test_software_interrupt(void)
enable_nvic_irq(EXTI0_IRQ);
/* Check that there are no interrupts already pending in PR */
- g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
/* Check that this specific interrupt isn't pending in NVIC */
g_assert_false(check_nvic_pending(EXTI0_IRQ));
@@ -191,9 +191,9 @@ static void test_software_interrupt(void)
exti_writel(EXTI_SWIER1, 0x00000001);
/* Check that the write in SWIER was effective */
- g_assert_cmpuint(exti_readl(EXTI_SWIER1), ==, 0x00000001);
+ g_assert_cmphex(exti_readl(EXTI_SWIER1), ==, 0x00000001);
/* Check that the corresponding pending bit in PR is set */
- g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000001);
+ g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000001);
/* Check that the corresponding interrupt is pending in the NVIC */
g_assert_true(check_nvic_pending(EXTI0_IRQ));
@@ -201,9 +201,9 @@ static void test_software_interrupt(void)
exti_writel(EXTI_PR1, 0x00000001);
/* Check that the write in PR was effective */
- g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
/* Check that the corresponding bit in SWIER was cleared */
- g_assert_cmpuint(exti_readl(EXTI_SWIER1), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_SWIER1), ==, 0x00000000);
/* Check that the interrupt is still pending in the NVIC */
g_assert_true(check_nvic_pending(EXTI0_IRQ));
@@ -214,7 +214,7 @@ static void test_software_interrupt(void)
enable_nvic_irq(EXTI35_IRQ);
/* Check that there are no interrupts already pending */
- g_assert_cmpuint(exti_readl(EXTI_PR2), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_PR2), ==, 0x00000000);
g_assert_false(check_nvic_pending(EXTI35_IRQ));
/* Enable interrupt line EXTI0 */
@@ -224,9 +224,9 @@ static void test_software_interrupt(void)
exti_writel(EXTI_SWIER2, 0x00000008);
/* Check that the write in SWIER was effective */
- g_assert_cmpuint(exti_readl(EXTI_SWIER2), ==, 0x00000008);
+ g_assert_cmphex(exti_readl(EXTI_SWIER2), ==, 0x00000008);
/* Check that the corresponding pending bit in PR is set */
- g_assert_cmpuint(exti_readl(EXTI_PR2), ==, 0x00000008);
+ g_assert_cmphex(exti_readl(EXTI_PR2), ==, 0x00000008);
/* Check that the corresponding interrupt is pending in the NVIC */
g_assert_true(check_nvic_pending(EXTI35_IRQ));
@@ -234,9 +234,9 @@ static void test_software_interrupt(void)
exti_writel(EXTI_PR2, 0x00000008);
/* Check that the write in PR was effective */
- g_assert_cmpuint(exti_readl(EXTI_PR2), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_PR2), ==, 0x00000000);
/* Check that the corresponding bit in SWIER was cleared */
- g_assert_cmpuint(exti_readl(EXTI_SWIER2), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_SWIER2), ==, 0x00000000);
/* Check that the interrupt is still pending in the NVIC */
g_assert_true(check_nvic_pending(EXTI35_IRQ));
@@ -259,16 +259,16 @@ static void test_edge_selector(void)
/* Test that an irq is raised on rising edge only */
exti_set_irq(0, 0);
- g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
g_assert_false(check_nvic_pending(EXTI0_IRQ));
exti_set_irq(0, 1);
- g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000001);
+ g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000001);
g_assert_true(check_nvic_pending(EXTI0_IRQ));
/* Clean the test */
exti_writel(EXTI_PR1, 0x00000001);
- g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
unpend_nvic_irq(EXTI0_IRQ);
g_assert_false(check_nvic_pending(EXTI0_IRQ));
@@ -280,16 +280,16 @@ static void test_edge_selector(void)
/* Test that an irq is raised on falling edge only */
exti_set_irq(0, 1);
- g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
g_assert_false(check_nvic_pending(EXTI0_IRQ));
exti_set_irq(0, 0);
- g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000001);
+ g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000001);
g_assert_true(check_nvic_pending(EXTI0_IRQ));
/* Clean the test */
exti_writel(EXTI_PR1, 0x00000001);
- g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
unpend_nvic_irq(EXTI0_IRQ);
g_assert_false(check_nvic_pending(EXTI0_IRQ));
@@ -300,23 +300,23 @@ static void test_edge_selector(void)
/* Test that an irq is raised on rising edge */
exti_set_irq(0, 1);
- g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000001);
+ g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000001);
g_assert_true(check_nvic_pending(EXTI0_IRQ));
/* Clean the test */
exti_writel(EXTI_PR1, 0x00000001);
- g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
unpend_nvic_irq(EXTI0_IRQ);
g_assert_false(check_nvic_pending(EXTI0_IRQ));
/* Test that an irq is raised on falling edge */
exti_set_irq(0, 0);
- g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000001);
+ g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000001);
g_assert_true(check_nvic_pending(EXTI0_IRQ));
/* Clean the test */
exti_writel(EXTI_PR1, 0x00000001);
- g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
unpend_nvic_irq(EXTI0_IRQ);
g_assert_false(check_nvic_pending(EXTI0_IRQ));
@@ -327,11 +327,11 @@ static void test_edge_selector(void)
/* Test that no irq is raised */
exti_set_irq(0, 1);
- g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
g_assert_false(check_nvic_pending(EXTI0_IRQ));
exti_set_irq(0, 0);
- g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
g_assert_false(check_nvic_pending(EXTI0_IRQ));
}
@@ -350,7 +350,7 @@ static void test_no_software_interrupt(void)
enable_nvic_irq(EXTI0_IRQ);
/* Check that there are no interrupts already pending in PR */
- g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
/* Check that this specific interrupt isn't pending in NVIC */
g_assert_false(check_nvic_pending(EXTI0_IRQ));
@@ -361,9 +361,9 @@ static void test_no_software_interrupt(void)
exti_writel(EXTI_SWIER1, 0x00000001);
/* Check that the write in SWIER was effective */
- g_assert_cmpuint(exti_readl(EXTI_SWIER1), ==, 0x00000001);
+ g_assert_cmphex(exti_readl(EXTI_SWIER1), ==, 0x00000001);
/* Check that the pending bit in PR wasn't set */
- g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
/* Check that the interrupt isn't pending in NVIC */
g_assert_false(check_nvic_pending(EXTI0_IRQ));
@@ -371,7 +371,7 @@ static void test_no_software_interrupt(void)
exti_writel(EXTI_IMR1, 0x00000001);
/* Check that the pending bit in PR wasn't set */
- g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
/* Check that the interrupt isn't pending in NVIC */
g_assert_false(check_nvic_pending(EXTI0_IRQ));
@@ -382,7 +382,7 @@ static void test_no_software_interrupt(void)
enable_nvic_irq(EXTI35_IRQ);
/* Check that there are no interrupts already pending in PR */
- g_assert_cmpuint(exti_readl(EXTI_PR2), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_PR2), ==, 0x00000000);
/* Check that this specific interrupt isn't pending in NVIC */
g_assert_false(check_nvic_pending(EXTI35_IRQ));
@@ -393,9 +393,9 @@ static void test_no_software_interrupt(void)
exti_writel(EXTI_SWIER2, 0x00000008);
/* Check that the write in SWIER was effective */
- g_assert_cmpuint(exti_readl(EXTI_SWIER2), ==, 0x00000008);
+ g_assert_cmphex(exti_readl(EXTI_SWIER2), ==, 0x00000008);
/* Check that the pending bit in PR wasn't set */
- g_assert_cmpuint(exti_readl(EXTI_PR2), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_PR2), ==, 0x00000000);
/* Check that the interrupt isn't pending in NVIC */
g_assert_false(check_nvic_pending(EXTI35_IRQ));
@@ -403,7 +403,7 @@ static void test_no_software_interrupt(void)
exti_writel(EXTI_IMR2, 0x00000008);
/* Check that the pending bit in PR wasn't set */
- g_assert_cmpuint(exti_readl(EXTI_PR2), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_PR2), ==, 0x00000000);
/* Check that the interrupt isn't pending in NVIC */
g_assert_false(check_nvic_pending(EXTI35_IRQ));
}
@@ -423,7 +423,7 @@ static void test_masked_interrupt(void)
enable_nvic_irq(EXTI1_IRQ);
/* Check that there are no interrupts already pending in PR */
- g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
/* Check that this specific interrupt isn't pending in NVIC */
g_assert_false(check_nvic_pending(EXTI1_IRQ));
@@ -437,7 +437,7 @@ static void test_masked_interrupt(void)
exti_set_irq(1, 1);
/* Check that the pending bit in PR wasn't set */
- g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
/* Check that the interrupt isn't pending in NVIC */
g_assert_false(check_nvic_pending(EXTI1_IRQ));
@@ -445,7 +445,7 @@ static void test_masked_interrupt(void)
exti_writel(EXTI_IMR1, 0x00000002);
/* Check that the pending bit in PR wasn't set */
- g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
/* Check that the interrupt isn't pending in NVIC */
g_assert_false(check_nvic_pending(EXTI1_IRQ));
}
@@ -469,7 +469,7 @@ static void test_interrupt(void)
enable_nvic_irq(EXTI1_IRQ);
/* Check that there are no interrupts already pending in PR */
- g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
/* Check that this specific interrupt isn't pending in NVIC */
g_assert_false(check_nvic_pending(EXTI1_IRQ));
@@ -483,7 +483,7 @@ static void test_interrupt(void)
exti_set_irq(1, 1);
/* Check that the pending bit in PR was set */
- g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000002);
+ g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000002);
/* Check that the interrupt is pending in NVIC */
g_assert_true(check_nvic_pending(EXTI1_IRQ));
@@ -491,7 +491,7 @@ static void test_interrupt(void)
exti_writel(EXTI_PR1, 0x00000002);
/* Check that the write in PR was effective */
- g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
/* Check that the interrupt is still pending in the NVIC */
g_assert_true(check_nvic_pending(EXTI1_IRQ));
@@ -509,7 +509,7 @@ static void test_orred_interrupts(void)
*/
enable_nvic_irq(EXTI5_9_IRQ);
/* Check that there are no interrupts already pending in PR */
- g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
/* Check that this specific interrupt isn't pending in NVIC */
g_assert_false(check_nvic_pending(EXTI5_9_IRQ));
@@ -522,11 +522,11 @@ static void test_orred_interrupts(void)
/* Raise GPIO line i, check that the interrupt is pending */
for (unsigned i = 5; i < 10; i++) {
exti_set_irq(i, 1);
- g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 1 << i);
+ g_assert_cmphex(exti_readl(EXTI_PR1), ==, 1 << i);
g_assert_true(check_nvic_pending(EXTI5_9_IRQ));
exti_writel(EXTI_PR1, 1 << i);
- g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000);
+ g_assert_cmphex(exti_readl(EXTI_PR1), ==, 0x00000000);
g_assert_true(check_nvic_pending(EXTI5_9_IRQ));
unpend_nvic_irq(EXTI5_9_IRQ);
diff --git a/tests/qtest/stm32l4x5_syscfg-test.c b/tests/qtest/stm32l4x5_syscfg-test.c
index ed4801798d..59bac829b7 100644
--- a/tests/qtest/stm32l4x5_syscfg-test.c
+++ b/tests/qtest/stm32l4x5_syscfg-test.c
@@ -54,27 +54,27 @@ static void test_reset(void)
/*
* Test that registers are initialized at the correct values
*/
- g_assert_cmpuint(syscfg_readl(SYSCFG_MEMRMP), ==, 0x00000000);
+ g_assert_cmphex(syscfg_readl(SYSCFG_MEMRMP), ==, 0x00000000);
- g_assert_cmpuint(syscfg_readl(SYSCFG_CFGR1), ==, 0x7C000001);
+ g_assert_cmphex(syscfg_readl(SYSCFG_CFGR1), ==, 0x7C000001);
- g_assert_cmpuint(syscfg_readl(SYSCFG_EXTICR1), ==, 0x00000000);
+ g_assert_cmphex(syscfg_readl(SYSCFG_EXTICR1), ==, 0x00000000);
- g_assert_cmpuint(syscfg_readl(SYSCFG_EXTICR2), ==, 0x00000000);
+ g_assert_cmphex(syscfg_readl(SYSCFG_EXTICR2), ==, 0x00000000);
- g_assert_cmpuint(syscfg_readl(SYSCFG_EXTICR3), ==, 0x00000000);
+ g_assert_cmphex(syscfg_readl(SYSCFG_EXTICR3), ==, 0x00000000);
- g_assert_cmpuint(syscfg_readl(SYSCFG_EXTICR4), ==, 0x00000000);
+ g_assert_cmphex(syscfg_readl(SYSCFG_EXTICR4), ==, 0x00000000);
- g_assert_cmpuint(syscfg_readl(SYSCFG_SCSR), ==, 0x00000000);
+ g_assert_cmphex(syscfg_readl(SYSCFG_SCSR), ==, 0x00000000);
- g_assert_cmpuint(syscfg_readl(SYSCFG_CFGR2), ==, 0x00000000);
+ g_assert_cmphex(syscfg_readl(SYSCFG_CFGR2), ==, 0x00000000);
- g_assert_cmpuint(syscfg_readl(SYSCFG_SWPR), ==, 0x00000000);
+ g_assert_cmphex(syscfg_readl(SYSCFG_SWPR), ==, 0x00000000);
- g_assert_cmpuint(syscfg_readl(SYSCFG_SKR), ==, 0x00000000);
+ g_assert_cmphex(syscfg_readl(SYSCFG_SKR), ==, 0x00000000);
- g_assert_cmpuint(syscfg_readl(SYSCFG_SWPR2), ==, 0x00000000);
+ g_assert_cmphex(syscfg_readl(SYSCFG_SWPR2), ==, 0x00000000);
}
static void test_reserved_bits(void)
@@ -87,25 +87,25 @@ static void test_reserved_bits(void)
* register is still at reset value
*/
syscfg_writel(SYSCFG_MEMRMP, 0xFFFFFEF8);
- g_assert_cmpuint(syscfg_readl(SYSCFG_MEMRMP), ==, 0x00000000);
+ g_assert_cmphex(syscfg_readl(SYSCFG_MEMRMP), ==, 0x00000000);
syscfg_writel(SYSCFG_CFGR1, 0x7F00FEFF);
- g_assert_cmpuint(syscfg_readl(SYSCFG_CFGR1), ==, 0x7C000001);
+ g_assert_cmphex(syscfg_readl(SYSCFG_CFGR1), ==, 0x7C000001);
syscfg_writel(SYSCFG_EXTICR1, 0xFFFF0000);
- g_assert_cmpuint(syscfg_readl(SYSCFG_EXTICR1), ==, 0x00000000);
+ g_assert_cmphex(syscfg_readl(SYSCFG_EXTICR1), ==, 0x00000000);
syscfg_writel(SYSCFG_EXTICR2, 0xFFFF0000);
- g_assert_cmpuint(syscfg_readl(SYSCFG_EXTICR2), ==, 0x00000000);
+ g_assert_cmphex(syscfg_readl(SYSCFG_EXTICR2), ==, 0x00000000);
syscfg_writel(SYSCFG_EXTICR3, 0xFFFF0000);
- g_assert_cmpuint(syscfg_readl(SYSCFG_EXTICR3), ==, 0x00000000);
+ g_assert_cmphex(syscfg_readl(SYSCFG_EXTICR3), ==, 0x00000000);
syscfg_writel(SYSCFG_EXTICR4, 0xFFFF0000);
- g_assert_cmpuint(syscfg_readl(SYSCFG_EXTICR4), ==, 0x00000000);
+ g_assert_cmphex(syscfg_readl(SYSCFG_EXTICR4), ==, 0x00000000);
syscfg_writel(SYSCFG_SKR, 0xFFFFFF00);
- g_assert_cmpuint(syscfg_readl(SYSCFG_SKR), ==, 0x00000000);
+ g_assert_cmphex(syscfg_readl(SYSCFG_SKR), ==, 0x00000000);
}
static void test_set_and_clear(void)
@@ -114,40 +114,40 @@ static void test_set_and_clear(void)
* Test that regular bits can be set and cleared
*/
syscfg_writel(SYSCFG_MEMRMP, 0x00000107);
- g_assert_cmpuint(syscfg_readl(SYSCFG_MEMRMP), ==, 0x00000107);
+ g_assert_cmphex(syscfg_readl(SYSCFG_MEMRMP), ==, 0x00000107);
syscfg_writel(SYSCFG_MEMRMP, 0x00000000);
- g_assert_cmpuint(syscfg_readl(SYSCFG_MEMRMP), ==, 0x00000000);
+ g_assert_cmphex(syscfg_readl(SYSCFG_MEMRMP), ==, 0x00000000);
/* cfgr1 bit 0 is clear only so we keep it set */
syscfg_writel(SYSCFG_CFGR1, 0xFCFF0101);
- g_assert_cmpuint(syscfg_readl(SYSCFG_CFGR1), ==, 0xFCFF0101);
+ g_assert_cmphex(syscfg_readl(SYSCFG_CFGR1), ==, 0xFCFF0101);
syscfg_writel(SYSCFG_CFGR1, 0x00000001);
- g_assert_cmpuint(syscfg_readl(SYSCFG_CFGR1), ==, 0x00000001);
+ g_assert_cmphex(syscfg_readl(SYSCFG_CFGR1), ==, 0x00000001);
syscfg_writel(SYSCFG_EXTICR1, 0x0000FFFF);
- g_assert_cmpuint(syscfg_readl(SYSCFG_EXTICR1), ==, 0x0000FFFF);
+ g_assert_cmphex(syscfg_readl(SYSCFG_EXTICR1), ==, 0x0000FFFF);
syscfg_writel(SYSCFG_EXTICR1, 0x00000000);
- g_assert_cmpuint(syscfg_readl(SYSCFG_EXTICR1), ==, 0x00000000);
+ g_assert_cmphex(syscfg_readl(SYSCFG_EXTICR1), ==, 0x00000000);
syscfg_writel(SYSCFG_EXTICR2, 0x0000FFFF);
- g_assert_cmpuint(syscfg_readl(SYSCFG_EXTICR2), ==, 0x0000FFFF);
+ g_assert_cmphex(syscfg_readl(SYSCFG_EXTICR2), ==, 0x0000FFFF);
syscfg_writel(SYSCFG_EXTICR2, 0x00000000);
- g_assert_cmpuint(syscfg_readl(SYSCFG_EXTICR2), ==, 0x00000000);
+ g_assert_cmphex(syscfg_readl(SYSCFG_EXTICR2), ==, 0x00000000);
syscfg_writel(SYSCFG_EXTICR3, 0x0000FFFF);
- g_assert_cmpuint(syscfg_readl(SYSCFG_EXTICR3), ==, 0x0000FFFF);
+ g_assert_cmphex(syscfg_readl(SYSCFG_EXTICR3), ==, 0x0000FFFF);
syscfg_writel(SYSCFG_EXTICR3, 0x00000000);
- g_assert_cmpuint(syscfg_readl(SYSCFG_EXTICR3), ==, 0x00000000);
+ g_assert_cmphex(syscfg_readl(SYSCFG_EXTICR3), ==, 0x00000000);
syscfg_writel(SYSCFG_EXTICR4, 0x0000FFFF);
- g_assert_cmpuint(syscfg_readl(SYSCFG_EXTICR4), ==, 0x0000FFFF);
+ g_assert_cmphex(syscfg_readl(SYSCFG_EXTICR4), ==, 0x0000FFFF);
syscfg_writel(SYSCFG_EXTICR4, 0x00000000);
- g_assert_cmpuint(syscfg_readl(SYSCFG_EXTICR4), ==, 0x00000000);
+ g_assert_cmphex(syscfg_readl(SYSCFG_EXTICR4), ==, 0x00000000);
syscfg_writel(SYSCFG_SKR, 0x000000FF);
- g_assert_cmpuint(syscfg_readl(SYSCFG_SKR), ==, 0x000000FF);
+ g_assert_cmphex(syscfg_readl(SYSCFG_SKR), ==, 0x000000FF);
syscfg_writel(SYSCFG_SKR, 0x00000000);
- g_assert_cmpuint(syscfg_readl(SYSCFG_SKR), ==, 0x00000000);
+ g_assert_cmphex(syscfg_readl(SYSCFG_SKR), ==, 0x00000000);
}
static void test_clear_by_writing_1(void)
@@ -156,7 +156,7 @@ static void test_clear_by_writing_1(void)
* Test that writing '1' doesn't set the bit
*/
syscfg_writel(SYSCFG_CFGR2, 0x00000100);
- g_assert_cmpuint(syscfg_readl(SYSCFG_CFGR2), ==, 0x00000000);
+ g_assert_cmphex(syscfg_readl(SYSCFG_CFGR2), ==, 0x00000000);
}
static void test_set_only_bits(void)
@@ -166,15 +166,15 @@ static void test_set_only_bits(void)
*/
syscfg_writel(SYSCFG_CFGR2, 0x0000000F);
syscfg_writel(SYSCFG_CFGR2, 0x00000000);
- g_assert_cmpuint(syscfg_readl(SYSCFG_CFGR2), ==, 0x0000000F);
+ g_assert_cmphex(syscfg_readl(SYSCFG_CFGR2), ==, 0x0000000F);
syscfg_writel(SYSCFG_SWPR, 0xFFFFFFFF);
syscfg_writel(SYSCFG_SWPR, 0x00000000);
- g_assert_cmpuint(syscfg_readl(SYSCFG_SWPR), ==, 0xFFFFFFFF);
+ g_assert_cmphex(syscfg_readl(SYSCFG_SWPR), ==, 0xFFFFFFFF);
syscfg_writel(SYSCFG_SWPR2, 0xFFFFFFFF);
syscfg_writel(SYSCFG_SWPR2, 0x00000000);
- g_assert_cmpuint(syscfg_readl(SYSCFG_SWPR2), ==, 0xFFFFFFFF);
+ g_assert_cmphex(syscfg_readl(SYSCFG_SWPR2), ==, 0xFFFFFFFF);
system_reset();
}
@@ -186,7 +186,7 @@ static void test_clear_only_bits(void)
*/
syscfg_writel(SYSCFG_CFGR1, 0x00000000);
syscfg_writel(SYSCFG_CFGR1, 0x00000001);
- g_assert_cmpuint(syscfg_readl(SYSCFG_CFGR1), ==, 0x00000000);
+ g_assert_cmphex(syscfg_readl(SYSCFG_CFGR1), ==, 0x00000000);
system_reset();
}
--
2.44.0
next prev parent reply other threads:[~2024-04-24 8:00 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-24 7:57 [PULL 00/17] CI job updates, header cleanups and other misc patches Thomas Huth
2024-04-24 7:57 ` [PULL 01/17] MAINTAINERS: update email of Peter Lieven Thomas Huth
2024-04-24 7:57 ` Thomas Huth [this message]
2024-04-24 7:57 ` [PULL 03/17] docs: i386: pc: Update maximum CPU numbers for PC Q35 Thomas Huth
2024-04-24 7:57 ` [PULL 04/17] tests/vm: update openbsd image to 7.5 Thomas Huth
2024-04-24 7:57 ` [PULL 05/17] Revert ".travis.yml: Cache Avocado cache" Thomas Huth
2024-04-24 7:57 ` [PULL 06/17] .travis.yml: Remove the unused UNRELIABLE environment variable Thomas Huth
2024-04-24 7:57 ` [PULL 07/17] .travis.yml: Update the jobs to Ubuntu 22.04 Thomas Huth
2024-04-24 7:57 ` [PULL 08/17] .travis.yml: Do some more testing with Clang Thomas Huth
2024-04-24 7:57 ` [PULL 09/17] tests: Remove Ubuntu 20.04 container Thomas Huth
2024-04-24 7:57 ` [PULL 10/17] tests/lcitool/libvirt-ci: Update to the latest master branch Thomas Huth
2024-04-24 7:57 ` [PULL 11/17] tests/docker/dockerfiles: Run lcitool-refresh after the lcitool update Thomas Huth
2024-04-24 7:57 ` [PULL 12/17] tests: Update our CI to use CentOS Stream 9 instead of 8 Thomas Huth
2024-04-24 16:19 ` Richard Henderson
2024-04-25 5:02 ` Thomas Huth
2024-04-24 7:57 ` [PULL 13/17] ci: move external build environment setups to CentOS Stream 9 Thomas Huth
2024-04-24 7:57 ` [PULL 14/17] hw/s390x: Include missing 'cpu.h' header Thomas Huth
2024-04-24 7:57 ` [PULL 15/17] docs/devel: fix minor typo in submitting-a-patch.rst Thomas Huth
2024-04-24 7:57 ` [PULL 16/17] tests/unit: Remove debug statements in test-nested-aio-poll.c Thomas Huth
2024-04-24 7:57 ` [PULL 17/17] target/s390x: Remove KVM stubs in cpu_models.h Thomas Huth
2024-04-24 16:21 ` [PULL 00/17] CI job updates, header cleanups and other misc patches Richard Henderson
2024-04-25 5:11 ` Thomas Huth
2024-04-25 7:55 ` Daniel P. Berrangé
2024-04-25 12:56 ` Fabiano Rosas
2024-04-25 15:04 ` Richard Henderson
2024-04-25 15:14 ` Thomas Huth
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240424075735.248041-3-thuth@redhat.com \
--to=thuth@redhat.com \
--cc=ines.varhol@telecom-paris.fr \
--cc=ninad@linux.ibm.com \
--cc=philmd@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.