Re: [PATCH v3 1/7] dt-bindings: display: panel: Add himax hx83102 panel bindings

[Conor Dooley <conor@kernel.org>]

[-- Attachment #1: Type: text/plain, Size: 2161 bytes --]

On Thu, Apr 25, 2024 at 02:03:24PM +0800, cong yang wrote:
> Conor Dooley <conor@kernel.org> 于2024年4月25日周四 00:55写道：
> > On Wed, Apr 24, 2024 at 10:30:04AM +0800, Cong Yang wrote:

> > > +++ b/Documentation/devicetree/bindings/display/panel/himax,hx83102.yaml
> >
> > Filename matching a compatible please. What you've done here makes it
> > seem like there's a fallback compatible missing, given this looks like
> > the LCD panel controller and the starry compatible below is an LCD panel.
> 
> So change the filename to starry,himax83102-j02.yaml?

IDK chief, are you missing a fallback or not?

> 
> >
> > > @@ -0,0 +1,73 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/display/panel/himax,hx83102.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Himax HX83102 MIPI-DSI LCD panel controller

Because the title here makes it seem like there should be.

> > > +maintainers:
> > > +  - Cong Yang <yangcong5@huaqin.corp-partner.google.com>
> > > +
> > > +allOf:
> > > +  - $ref: panel-common.yaml#
> > > +
> > > +properties:
> > > +  compatible:
> > > +    enum:
> > > +        # STARRY himax83102-j02 10.51" WUXGA TFT LCD panel
> > > +      - starry,himax83102-j02
> > > +
> > > +  reg:
> > > +    description: the virtual channel number of a DSI peripheral
> > > +
> > > +  enable-gpios:
> > > +    description: a GPIO spec for the enable pin
> > > +
> > > +  pp1800-supply:
> > > +    description: core voltage supply
> > > +
> > > +  avdd-supply:
> > > +    description: phandle of the regulator that provides positive voltage
> > > +
> > > +  avee-supply:
> > > +    description: phandle of the regulator that provides negative voltage
> > > +
> > > +  backlight:
> > > +    description: phandle of the backlight device attached to the panel
> >
> > I'm not sure why this was given a description when port or rotation
> > was not.
> 
> So change it to backlight: true ?

Sure? It is just a repeat of something already described in
panel-common.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]