From: Rob Herring <robh@kernel.org>
To: Mohammad Shehar Yaar Tausif <sheharyaar48@gmail.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Thierry Reding <thierry.reding@gmail.com>,
Jonathan Hunter <jonathanh@nvidia.com>,
Thierry Reding <treding@nvidia.com>,
linux-sound@vger.kernel.org, devicetree@vger.kernel.org,
linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4] ASoC: dt-bindings: tegra30-i2s: convert to dt schema
Date: Fri, 26 Apr 2024 10:44:58 -0500 [thread overview]
Message-ID: <20240426154458.GA1964057-robh@kernel.org> (raw)
In-Reply-To: <20240425153045.49939-1-sheharyaar48@gmail.com>
On Thu, Apr 25, 2024 at 09:00:43PM +0530, Mohammad Shehar Yaar Tausif wrote:
> Convert NVIDIA Tegra30 I2S binding to DT schema and
> add "clock-names" property used by multiple tegra i2s blocks
> in arch/arm64/boot/dts/nvidia/tegra132.dtsi. This is not a
> required property by the binding.
>
> Signed-off-by: Mohammad Shehar Yaar Tausif <sheharyaar48@gmail.com>
> ---
> Changes v3->v4:
> - removed redundant example
> - defined clock-names property
>
> v3:
> https://lore.kernel.org/all/20240425090716.176818-1-sheharyaar48@gmail.com/
> ---
> .../bindings/sound/nvidia,tegra30-i2s.txt | 27 ------
> .../bindings/sound/nvidia,tegra30-i2s.yaml | 83 +++++++++++++++++++
> 2 files changed, 83 insertions(+), 27 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt
> create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.yaml
>
> diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt
> deleted file mode 100644
> index 38caa936f6f8..000000000000
> --- a/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt
> +++ /dev/null
> @@ -1,27 +0,0 @@
> -NVIDIA Tegra30 I2S controller
> -
> -Required properties:
> -- compatible : For Tegra30, must contain "nvidia,tegra30-i2s". For Tegra124,
> - must contain "nvidia,tegra124-i2s". Otherwise, must contain
> - "nvidia,<chip>-i2s" plus at least one of the above, where <chip> is
> - tegra114 or tegra132.
> -- reg : Should contain I2S registers location and length
> -- clocks : Must contain one entry, for the module clock.
> - See ../clocks/clock-bindings.txt for details.
> -- resets : Must contain an entry for each entry in reset-names.
> - See ../reset/reset.txt for details.
> -- reset-names : Must include the following entries:
> - - i2s
> -- nvidia,ahub-cif-ids : The list of AHUB CIF IDs for this port, rx (playback)
> - first, tx (capture) second. See nvidia,tegra30-ahub.txt for values.
> -
> -Example:
> -
> -i2s@70080300 {
> - compatible = "nvidia,tegra30-i2s";
> - reg = <0x70080300 0x100>;
> - nvidia,ahub-cif-ids = <4 4>;
> - clocks = <&tegra_car 11>;
> - resets = <&tegra_car 11>;
> - reset-names = "i2s";
> -};
> diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.yaml
> new file mode 100644
> index 000000000000..13cee366f5b3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.yaml
> @@ -0,0 +1,83 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/nvidia,tegra30-i2s.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NVIDIA Tegra30 I2S controller
> +
> +maintainers:
> + - Thierry Reding <treding@nvidia.com>
> + - Jon Hunter <jonathanh@nvidia.com>
> +
> +properties:
> + compatible:
> + oneOf:
> + - enum:
> + - nvidia,tegra124-i2s
> + - nvidia,tegra30-i2s
> + - items:
> + - enum:
> + - nvidia,tegra114-i2s
> + - nvidia,tegra132-i2s
> + - enum:
> + - nvidia,tegra124-i2s
> + - nvidia,tegra30-i2s
This allows 4 possible combinations for 2 SoCs. That may be how the old
binding was worded, but that's not valid.
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + clock-names:
> + const: i2s
> +
> + resets:
> + maxItems: 1
> +
> + reset-names:
> + const: i2s
> +
> + nvidia,ahub-cif-ids:
> + description: list of AHUB CIF IDs
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + items:
> + - description: rx (playback)
> + - description: tx (capture)
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - resets
> + - reset-names
> + - nvidia,ahub-cif-ids
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/tegra30-car.h>
> +
> + i2s@70080300 {
> + compatible = "nvidia,tegra30-i2s";
> + reg = <0x70080300 0x100>;
> + nvidia,ahub-cif-ids = <4 4>;
> + clocks = <&tegra_car TEGRA30_CLK_I2S0>;
> + resets = <&tegra_car 30>;
> + reset-names = "i2s";
> + };
> + - |
> + #include <dt-bindings/clock/tegra124-car.h>
> +
> + i2s@70301100 {
> + compatible = "nvidia,tegra124-i2s";
> + reg = <0x70301100 0x100>;
> + nvidia,ahub-cif-ids = <5 5>;
> + clocks = <&tegra_car TEGRA124_CLK_I2S1>;
> + clock-names = "i2s";
> + resets = <&tegra_car 11>;
> + reset-names = "i2s";
> + };
I didn't check what you removed, but this is still 1 example too many.
They are almost the same.
prev parent reply other threads:[~2024-04-26 15:45 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-25 15:30 [PATCH v4] ASoC: dt-bindings: tegra30-i2s: convert to dt schema Mohammad Shehar Yaar Tausif
2024-04-26 15:44 ` Rob Herring [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240426154458.GA1964057-robh@kernel.org \
--to=robh@kernel.org \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jonathanh@nvidia.com \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=sheharyaar48@gmail.com \
--cc=thierry.reding@gmail.com \
--cc=treding@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.