[PATCH v2 02/12] drm/gma500: Make I2C terminology more inclusive

[Easwar Hariharan <eahariha@linux.microsoft.com>]

I2C v7, SMBus 3.2, and I3C 1.1.1 specifications have replaced "master/slave"
with more appropriate terms. Inspired by and following on to Wolfram's
series to fix drivers/i2c/[1], fix the terminology for users of
I2C_ALGOBIT bitbanging interface, now that the approved verbiage exists
in the specification.

Compile tested, no functionality changes intended

[1]: https://lore.kernel.org/all/20240322132619.6389-1-wsa+renesas@sang-engineering.com/

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
---
 drivers/gpu/drm/gma500/cdv_intel_lvds.c |  2 +-
 drivers/gpu/drm/gma500/intel_bios.c     | 22 ++++++++++-----------
 drivers/gpu/drm/gma500/intel_bios.h     |  4 ++--
 drivers/gpu/drm/gma500/intel_gmbus.c    |  2 +-
 drivers/gpu/drm/gma500/psb_drv.h        |  2 +-
 drivers/gpu/drm/gma500/psb_intel_drv.h  |  2 +-
 drivers/gpu/drm/gma500/psb_intel_lvds.c |  4 ++--
 drivers/gpu/drm/gma500/psb_intel_sdvo.c | 26 ++++++++++++-------------
 8 files changed, 32 insertions(+), 32 deletions(-)

diff --git a/drivers/gpu/drm/gma500/cdv_intel_lvds.c b/drivers/gpu/drm/gma500/cdv_intel_lvds.c
index f08a6803dc18..c7652a02b42e 100644
--- a/drivers/gpu/drm/gma500/cdv_intel_lvds.c
+++ b/drivers/gpu/drm/gma500/cdv_intel_lvds.c
@@ -565,7 +565,7 @@ void cdv_intel_lvds_init(struct drm_device *dev,
 			dev->dev, "I2C bus registration failed.\n");
 		goto err_encoder_cleanup;
 	}
-	gma_encoder->i2c_bus->slave_addr = 0x2C;
+	gma_encoder->i2c_bus->target_addr = 0x2C;
 	dev_priv->lvds_i2c_bus = gma_encoder->i2c_bus;
 
 	/*
diff --git a/drivers/gpu/drm/gma500/intel_bios.c b/drivers/gpu/drm/gma500/intel_bios.c
index 8245b5603d2c..d5924ca3ed05 100644
--- a/drivers/gpu/drm/gma500/intel_bios.c
+++ b/drivers/gpu/drm/gma500/intel_bios.c
@@ -14,8 +14,8 @@
 #include "psb_intel_drv.h"
 #include "psb_intel_reg.h"
 
-#define	SLAVE_ADDR1	0x70
-#define	SLAVE_ADDR2	0x72
+#define	TARGET_ADDR1	0x70
+#define	TARGET_ADDR2	0x72
 
 static void *find_section(struct bdb_header *bdb, int section_id)
 {
@@ -357,10 +357,10 @@ parse_sdvo_device_mapping(struct drm_psb_private *dev_priv,
 			/* skip the device block if device type is invalid */
 			continue;
 		}
-		if (p_child->slave_addr != SLAVE_ADDR1 &&
-			p_child->slave_addr != SLAVE_ADDR2) {
+		if (p_child->target_addr != TARGET_ADDR1 &&
+			p_child->target_addr != TARGET_ADDR2) {
 			/*
-			 * If the slave address is neither 0x70 nor 0x72,
+			 * If the target address is neither 0x70 nor 0x72,
 			 * it is not a SDVO device. Skip it.
 			 */
 			continue;
@@ -371,22 +371,22 @@ parse_sdvo_device_mapping(struct drm_psb_private *dev_priv,
 			DRM_DEBUG_KMS("Incorrect SDVO port. Skip it\n");
 			continue;
 		}
-		DRM_DEBUG_KMS("the SDVO device with slave addr %2x is found on"
+		DRM_DEBUG_KMS("the SDVO device with target addr %2x is found on"
 				" %s port\n",
-				p_child->slave_addr,
+				p_child->target_addr,
 				(p_child->dvo_port == DEVICE_PORT_DVOB) ?
 					"SDVOB" : "SDVOC");
 		p_mapping = &(dev_priv->sdvo_mappings[p_child->dvo_port - 1]);
 		if (!p_mapping->initialized) {
 			p_mapping->dvo_port = p_child->dvo_port;
-			p_mapping->slave_addr = p_child->slave_addr;
+			p_mapping->target_addr = p_child->target_addr;
 			p_mapping->dvo_wiring = p_child->dvo_wiring;
 			p_mapping->ddc_pin = p_child->ddc_pin;
 			p_mapping->i2c_pin = p_child->i2c_pin;
 			p_mapping->initialized = 1;
 			DRM_DEBUG_KMS("SDVO device: dvo=%x, addr=%x, wiring=%d, ddc_pin=%d, i2c_pin=%d\n",
 				      p_mapping->dvo_port,
-				      p_mapping->slave_addr,
+				      p_mapping->target_addr,
 				      p_mapping->dvo_wiring,
 				      p_mapping->ddc_pin,
 				      p_mapping->i2c_pin);
@@ -394,10 +394,10 @@ parse_sdvo_device_mapping(struct drm_psb_private *dev_priv,
 			DRM_DEBUG_KMS("Maybe one SDVO port is shared by "
 					 "two SDVO device.\n");
 		}
-		if (p_child->slave2_addr) {
+		if (p_child->target2_addr) {
 			/* Maybe this is a SDVO device with multiple inputs */
 			/* And the mapping info is not added */
-			DRM_DEBUG_KMS("there exists the slave2_addr. Maybe this"
+			DRM_DEBUG_KMS("there exists the target2_addr. Maybe this"
 				" is a SDVO device with multiple inputs.\n");
 		}
 		count++;
diff --git a/drivers/gpu/drm/gma500/intel_bios.h b/drivers/gpu/drm/gma500/intel_bios.h
index 0e6facf21e33..b5adea2a20c3 100644
--- a/drivers/gpu/drm/gma500/intel_bios.h
+++ b/drivers/gpu/drm/gma500/intel_bios.h
@@ -186,13 +186,13 @@ struct child_device_config {
 	u16 addin_offset;
 	u8  dvo_port; /* See Device_PORT_* above */
 	u8  i2c_pin;
-	u8  slave_addr;
+	u8  target_addr;
 	u8  ddc_pin;
 	u16 edid_ptr;
 	u8  dvo_cfg; /* See DEVICE_CFG_* above */
 	u8  dvo2_port;
 	u8  i2c2_pin;
-	u8  slave2_addr;
+	u8  target2_addr;
 	u8  ddc2_pin;
 	u8  capabilities;
 	u8  dvo_wiring;/* See DEVICE_WIRE_* above */
diff --git a/drivers/gpu/drm/gma500/intel_gmbus.c b/drivers/gpu/drm/gma500/intel_gmbus.c
index aa45509859f2..ee8b047587f2 100644
--- a/drivers/gpu/drm/gma500/intel_gmbus.c
+++ b/drivers/gpu/drm/gma500/intel_gmbus.c
@@ -333,7 +333,7 @@ gmbus_xfer(struct i2c_adapter *adapter,
 clear_err:
 	/* Toggle the Software Clear Interrupt bit. This has the effect
 	 * of resetting the GMBUS controller and so clearing the
-	 * BUS_ERROR raised by the slave's NAK.
+	 * BUS_ERROR raised by the target's NAK.
 	 */
 	GMBUS_REG_WRITE(GMBUS1 + reg_offset, GMBUS_SW_CLR_INT);
 	GMBUS_REG_WRITE(GMBUS1 + reg_offset, 0);
diff --git a/drivers/gpu/drm/gma500/psb_drv.h b/drivers/gpu/drm/gma500/psb_drv.h
index 83c17689c454..bddf89b82fec 100644
--- a/drivers/gpu/drm/gma500/psb_drv.h
+++ b/drivers/gpu/drm/gma500/psb_drv.h
@@ -202,7 +202,7 @@ struct psb_intel_opregion {
 struct sdvo_device_mapping {
 	u8 initialized;
 	u8 dvo_port;
-	u8 slave_addr;
+	u8 target_addr;
 	u8 dvo_wiring;
 	u8 i2c_pin;
 	u8 i2c_speed;
diff --git a/drivers/gpu/drm/gma500/psb_intel_drv.h b/drivers/gpu/drm/gma500/psb_intel_drv.h
index c111e933e1ed..2499fd6a80c9 100644
--- a/drivers/gpu/drm/gma500/psb_intel_drv.h
+++ b/drivers/gpu/drm/gma500/psb_intel_drv.h
@@ -80,7 +80,7 @@ struct psb_intel_mode_device {
 struct gma_i2c_chan {
 	struct i2c_adapter base;
 	struct i2c_algo_bit_data algo;
-	u8 slave_addr;
+	u8 target_addr;
 
 	/* for getting at dev. private (mmio etc.) */
 	struct drm_device *drm_dev;
diff --git a/drivers/gpu/drm/gma500/psb_intel_lvds.c b/drivers/gpu/drm/gma500/psb_intel_lvds.c
index 8486de230ec9..d1cd9a940395 100644
--- a/drivers/gpu/drm/gma500/psb_intel_lvds.c
+++ b/drivers/gpu/drm/gma500/psb_intel_lvds.c
@@ -97,7 +97,7 @@ static int psb_lvds_i2c_set_brightness(struct drm_device *dev,
 
 	struct i2c_msg msgs[] = {
 		{
-			.addr = lvds_i2c_bus->slave_addr,
+			.addr = lvds_i2c_bus->target_addr,
 			.flags = 0,
 			.len = 2,
 			.buf = out_buf,
@@ -707,7 +707,7 @@ void psb_intel_lvds_init(struct drm_device *dev,
 			dev->dev, "I2C bus registration failed.\n");
 		goto err_encoder_cleanup;
 	}
-	lvds_priv->i2c_bus->slave_addr = 0x2C;
+	lvds_priv->i2c_bus->target_addr = 0x2C;
 	dev_priv->lvds_i2c_bus =  lvds_priv->i2c_bus;
 
 	/*
diff --git a/drivers/gpu/drm/gma500/psb_intel_sdvo.c b/drivers/gpu/drm/gma500/psb_intel_sdvo.c
index e4f914deceba..8dafff963ca8 100644
--- a/drivers/gpu/drm/gma500/psb_intel_sdvo.c
+++ b/drivers/gpu/drm/gma500/psb_intel_sdvo.c
@@ -70,7 +70,7 @@ struct psb_intel_sdvo {
 	struct gma_encoder base;
 
 	struct i2c_adapter *i2c;
-	u8 slave_addr;
+	u8 target_addr;
 
 	struct i2c_adapter ddc;
 
@@ -259,13 +259,13 @@ static bool psb_intel_sdvo_read_byte(struct psb_intel_sdvo *psb_intel_sdvo, u8 a
 {
 	struct i2c_msg msgs[] = {
 		{
-			.addr = psb_intel_sdvo->slave_addr,
+			.addr = psb_intel_sdvo->target_addr,
 			.flags = 0,
 			.len = 1,
 			.buf = &addr,
 		},
 		{
-			.addr = psb_intel_sdvo->slave_addr,
+			.addr = psb_intel_sdvo->target_addr,
 			.flags = I2C_M_RD,
 			.len = 1,
 			.buf = ch,
@@ -463,14 +463,14 @@ static bool psb_intel_sdvo_write_cmd(struct psb_intel_sdvo *psb_intel_sdvo, u8 c
 	psb_intel_sdvo_debug_write(psb_intel_sdvo, cmd, args, args_len);
 
 	for (i = 0; i < args_len; i++) {
-		msgs[i].addr = psb_intel_sdvo->slave_addr;
+		msgs[i].addr = psb_intel_sdvo->target_addr;
 		msgs[i].flags = 0;
 		msgs[i].len = 2;
 		msgs[i].buf = buf + 2 *i;
 		buf[2*i + 0] = SDVO_I2C_ARG_0 - i;
 		buf[2*i + 1] = ((u8*)args)[i];
 	}
-	msgs[i].addr = psb_intel_sdvo->slave_addr;
+	msgs[i].addr = psb_intel_sdvo->target_addr;
 	msgs[i].flags = 0;
 	msgs[i].len = 2;
 	msgs[i].buf = buf + 2*i;
@@ -479,12 +479,12 @@ static bool psb_intel_sdvo_write_cmd(struct psb_intel_sdvo *psb_intel_sdvo, u8 c
 
 	/* the following two are to read the response */
 	status = SDVO_I2C_CMD_STATUS;
-	msgs[i+1].addr = psb_intel_sdvo->slave_addr;
+	msgs[i+1].addr = psb_intel_sdvo->target_addr;
 	msgs[i+1].flags = 0;
 	msgs[i+1].len = 1;
 	msgs[i+1].buf = &status;
 
-	msgs[i+2].addr = psb_intel_sdvo->slave_addr;
+	msgs[i+2].addr = psb_intel_sdvo->target_addr;
 	msgs[i+2].flags = I2C_M_RD;
 	msgs[i+2].len = 1;
 	msgs[i+2].buf = &status;
@@ -1899,7 +1899,7 @@ psb_intel_sdvo_is_hdmi_connector(struct psb_intel_sdvo *psb_intel_sdvo, int devi
 }
 
 static u8
-psb_intel_sdvo_get_slave_addr(struct drm_device *dev, int sdvo_reg)
+psb_intel_sdvo_get_target_addr(struct drm_device *dev, int sdvo_reg)
 {
 	struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
 	struct sdvo_device_mapping *my_mapping, *other_mapping;
@@ -1913,14 +1913,14 @@ psb_intel_sdvo_get_slave_addr(struct drm_device *dev, int sdvo_reg)
 	}
 
 	/* If the BIOS described our SDVO device, take advantage of it. */
-	if (my_mapping->slave_addr)
-		return my_mapping->slave_addr;
+	if (my_mapping->target_addr)
+		return my_mapping->target_addr;
 
 	/* If the BIOS only described a different SDVO device, use the
 	 * address that it isn't using.
 	 */
-	if (other_mapping->slave_addr) {
-		if (other_mapping->slave_addr == 0x70)
+	if (other_mapping->target_addr) {
+		if (other_mapping->target_addr == 0x70)
 			return 0x72;
 		else
 			return 0x70;
@@ -2446,7 +2446,7 @@ bool psb_intel_sdvo_init(struct drm_device *dev, int sdvo_reg)
 		return false;
 
 	psb_intel_sdvo->sdvo_reg = sdvo_reg;
-	psb_intel_sdvo->slave_addr = psb_intel_sdvo_get_slave_addr(dev, sdvo_reg) >> 1;
+	psb_intel_sdvo->target_addr = psb_intel_sdvo_get_target_addr(dev, sdvo_reg) >> 1;
 	psb_intel_sdvo_select_i2c_bus(dev_priv, psb_intel_sdvo, sdvo_reg);
 	if (!psb_intel_sdvo_init_ddc_proxy(psb_intel_sdvo, dev)) {
 		kfree(psb_intel_sdvo);
-- 
2.34.1