Re: [PATCH v3 00/11] media: renesas: rcar-csi2: Use the subdev active state

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hello,

On Thu, May 09, 2024 at 06:13:50PM +0200, Jacopo Mondi wrote:
> v2->v3:
> - rcar-csi2: Collect v2.2 of [4/11]
> - adv748x: enum_mbus_code: reduce the number of formats to the ones supported
>   by the HDMI and Analog front ends;
> - adv748x: enum_mbus_code: enumerate all formats on sink pad; enumerate the
>   active format on the source pad
> - max9286: Apply the format to all pads to enforce all links to have the same
>   format
> - max9286: Remove max9286_set_fsync_period() from setup
> 
> v2->v1:
>   - Remove "media: adv748x-csi2: Initialize subdev format"
>   - Add "media: adv748x-afe: Use 1X16 media bus code"
>   - Tested with CVBS
>   - address comments from Laurent and Niklas
> 
> A branch is available at
> https://git.kernel.org/pub/scm/linux/kernel/git/jmondi/linux.git/
> jmondi/renesas-drivers-2024-04-23-v6.9-rc5/multistream-prep
> 
> As a follow-up to the recently sent
> "media: renesas: rcar-csi2: Support multiple streams" series, this smaller
> version collects some fixes and implement usage of the subdev active state
> to simplify the R-Car CSI-2, ADV748x and MAX9286 drivers implementations.
> 
> Tested with GMSL on Eagle V3M
> Tested with HDMI on Salvator-X
> Tested with CVBS on Salvator-X
> Boot tested on WhiteHawk V4H

Niklas, would you be able to runtime-test this on V4H ? The series is
otherwise ready to be merged in my opinion.

> Jacopo Mondi (11):
>   media: rcar-vin: Fix YUYV8_1X16 handling for CSI-2
>   media: rcar-csi2: Disable runtime_pm in probe error
>   media: rcar-csi2: Cleanup subdevice in remove()
>   media: rcar-csi2: Use the subdev active state
>   media: adv748x-csi2: Implement enum_mbus_codes
>   media: adv748x-csi2: Validate the image format
>   media: adv748x-csi2: Use the subdev active state
>   media: adv748x-afe: Use 1X16 media bus code
>   media: max9286: Fix enum_mbus_code
>   media: max9286: Use the subdev active state
>   media: max9286: Use frame interval from subdev state
> 
>  drivers/media/i2c/adv748x/adv748x-afe.c       |   4 +-
>  drivers/media/i2c/adv748x/adv748x-csi2.c      | 145 +++++++++-----
>  drivers/media/i2c/adv748x/adv748x.h           |   1 -
>  drivers/media/i2c/max9286.c                   | 182 +++++++-----------
>  drivers/media/platform/renesas/rcar-csi2.c    | 155 +++++++++------
>  .../platform/renesas/rcar-vin/rcar-dma.c      |  16 +-
>  6 files changed, 271 insertions(+), 232 deletions(-)

-- 
Regards,

Laurent Pinchart