From: "Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
To: Andrew Lunn <andrew@lunn.ch>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
netdev@vger.kernel.org, linux-renesas-soc@vger.kernel.org
Subject: Re: [net-next,v4] net: ethernet: rtsn: Add support for Renesas Ethernet-TSN
Date: Thu, 9 May 2024 23:03:44 +0200 [thread overview]
Message-ID: <20240509210344.GL1385281@ragnatech.se> (raw)
In-Reply-To: <0d7b04a6-9f5b-41c7-bd52-890521019f8d@lunn.ch>
On 2024-05-09 22:25:27 +0200, Andrew Lunn wrote:
> > +static void rtsn_set_delay_mode(struct rtsn_private *priv)
> > +{
> > + struct device_node *np = priv->ndev->dev.parent->of_node;
> > + u32 delay;
> > + u32 val;
> > +
> > + val = 0;
> > +
> > + /* The MAC is capable of applying a delay on both Rx and Tx. Each
> > + * delay can either be on or off, there is no way to set its length.
> > + *
> > + * The exact delay applied depends on electric characteristics of the
> > + * board. The datasheet describes a typical Rx delay of 1800 ps and a
> > + * typical Tx delay of 2000 ps.
> > + *
> > + * There are boards where the RTSN device is used together with PHYs
> > + * who do not support a large enough internal delays to function. These
> > + * boards depends on the MAC applying these inexact delays.
> > + */
> > +
> > + /* If the phy-mode is rgmii or rgmii-rxid apply Rx delay on the MAC */
> > + if (priv->iface == PHY_INTERFACE_MODE_RGMII_ID ||
> > + priv->iface == PHY_INTERFACE_MODE_RGMII_RXID)
> > + if (!of_property_read_u32(np, "rx-internal-delay-ps", &delay))
> > + if (delay)
> > + val |= GPOUT_RDM;
> > +
> > + /* If the phy-mode is rgmii or rgmii-txid apply Tx delay on the MAC */
> > + if (priv->iface == PHY_INTERFACE_MODE_RGMII_ID ||
> > + priv->iface == PHY_INTERFACE_MODE_RGMII_TXID)
> > + if (!of_property_read_u32(np, "tx-internal-delay-ps", &delay))
> > + if (delay)
> > + val |= GPOUT_TDM;
>
> Much better, but still not correct. rx-internal-delay-ps and
> tx-internal-delay-ps is meant for fine tuning the delays, generally in
> steps of a few 10ps. It is applied unconditionally, since it is just a
> fine tune.
>
> You hardware does not support fine tuning, just 1800/2000ps. So it
> makes no sense to use these DT properties. Just enable GPOUT_RDM or
> GPOUT_TDM as appropriate for PHY_INTERFACE_MODE_*.
I will address this and send a new version. Thanks for checking this.
>
> Andrew
>
> ---
> pw-bot: cr
--
Kind Regards,
Niklas Söderlund
next prev parent reply other threads:[~2024-05-09 21:03 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-09 9:52 [net-next,v4] net: ethernet: rtsn: Add support for Renesas Ethernet-TSN Niklas Söderlund
2024-05-09 20:25 ` Andrew Lunn
2024-05-09 21:03 ` Niklas Söderlund [this message]
2024-05-09 21:12 ` Andrew Lunn
2024-05-09 22:07 ` Niklas Söderlund
2024-05-10 12:38 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240509210344.GL1385281@ragnatech.se \
--to=niklas.soderlund+renesas@ragnatech.se \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.