All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: "Paweł Anikiel" <panikiel@google.com>
Cc: airlied@gmail.com, akpm@linux-foundation.org,
	conor+dt@kernel.org, daniel@ffwll.ch, dinguyen@kernel.org,
	hverkuil-cisco@xs4all.nl, krzysztof.kozlowski+dt@linaro.org,
	maarten.lankhorst@linux.intel.com, mchehab@kernel.org,
	mripard@kernel.org, tzimmermann@suse.de,
	devicetree@vger.kernel.org, dri-devel@lists.freedesktop.org,
	linux-kernel@vger.kernel.org, linux-media@vger.kernel.org,
	chromeos-krk-upstreaming@google.com
Subject: Re: [PATCH v3 09/10] media: dt-bindings: Add Intel Displayport RX IP
Date: Fri, 10 May 2024 16:24:42 -0500	[thread overview]
Message-ID: <20240510212442.GA758313-robh@kernel.org> (raw)
In-Reply-To: <20240507155413.266057-10-panikiel@google.com>

On Tue, May 07, 2024 at 03:54:12PM +0000, Paweł Anikiel wrote:
> Add dt binding for the Intel Displayport receiver FPGA IP.
> It is a part of the DisplayPort Intel FPGA IP Core, and supports
> DisplayPort 1.4, HBR3 video capture and Multi-Stream Transport.
> 
> The user guide can be found here:
> https://www.intel.com/programmable/technical-pdfs/683273.pdf
> 
> Signed-off-by: Paweł Anikiel <panikiel@google.com>
> ---
>  .../devicetree/bindings/media/intel,dprx.yaml | 172 ++++++++++++++++++
>  1 file changed, 172 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/intel,dprx.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/intel,dprx.yaml b/Documentation/devicetree/bindings/media/intel,dprx.yaml
> new file mode 100644
> index 000000000000..01bed858f746
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/intel,dprx.yaml
> @@ -0,0 +1,172 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/intel,dprx.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Intel DisplayPort RX IP
> +
> +maintainers:
> +  - Paweł Anikiel <panikiel@google.com>
> +
> +description: |
> +  The Intel Displayport RX IP is a part of the DisplayPort Intel FPGA IP
> +  Core. It implements a DisplayPort 1.4 receiver capable of HBR3 video
> +  capture and Multi-Stream Transport.
> +
> +  The IP features a large number of configuration parameters, found at:
> +  https://www.intel.com/content/www/us/en/docs/programmable/683273/23-3-20-0-1/sink-parameters.html
> +
> +  The following parameters have to be enabled:
> +    - Support DisplayPort sink
> +    - Enable GPU control
> +  The following parameters have to be set in the devicetree:
> +    - RX maximum link rate (using link-frequencies)
> +    - Maximum lane count (using data-lanes)
> +    - Support MST (using multi-stream-support)
> +    - Max stream count (inferred from the number of ports)
> +
> +properties:
> +  compatible:
> +    const: intel,dprx-20.0.1
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        description: MST virtual channel 0 or SST main link
> +
> +        properties:
> +          endpoint:
> +            $ref: /schemas/media/video-interfaces.yaml#
> +
> +            properties:
> +              link-frequencies: true
> +
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4
> +
> +              multi-stream-support: true
> +
> +            required:
> +              - data-lanes
> +              - link-frequencies
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description: MST virtual channel 0 or SST main link

How can port@0 also be "MST virtual channel 0 or SST main link"?

> +
> +      port@2:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description: MST virtual channel 1
> +
> +      port@3:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description: MST virtual channel 2
> +
> +      port@4:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description: MST virtual channel 3
> +
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    dp-receiver@c0062000 {
> +        compatible = "intel,dprx-20.0.1";
> +        reg = <0xc0062000 0x800>;
> +        interrupt-parent = <&dprx_mst_irq>;
> +        interrupts = <0 IRQ_TYPE_EDGE_RISING>;
> +
> +        ports {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            port@0 {
> +                reg = <0>;
> +                dprx_mst_in: endpoint {
> +                    remote-endpoint = <&dp_input_mst_0>;
> +                    data-lanes = <0 1 2 3>;
> +                    link-frequencies = /bits/ 64 <1620000000 2700000000
> +                                                  5400000000 8100000000>;
> +                    multi-stream-support;
> +                };
> +            };
> +
> +            port@1 {
> +                reg = <1>;
> +                dprx_mst_0: endpoint {
> +                    remote-endpoint = <&video_mst0_0>;
> +                };
> +            };
> +
> +            port@2 {
> +                reg = <2>;
> +                dprx_mst_1: endpoint {
> +                    remote-endpoint = <&video_mst1_0>;
> +                };
> +            };
> +
> +            port@3 {
> +                reg = <3>;
> +                dprx_mst_2: endpoint {
> +                    remote-endpoint = <&video_mst2_0>;
> +                };
> +            };
> +
> +            port@4 {
> +                reg = <4>;
> +                dprx_mst_3: endpoint {
> +                    remote-endpoint = <&video_mst3_0>;
> +                };
> +            };
> +        };
> +    };
> +
> +  - |
> +    dp-receiver@c0064000 {
> +        compatible = "intel,dprx-20.0.1";
> +        reg = <0xc0064000 0x800>;
> +        interrupt-parent = <&dprx_sst_irq>;
> +        interrupts = <0 IRQ_TYPE_EDGE_RISING>;
> +
> +        ports {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            port@0 {
> +                reg = <0>;
> +                dprx_sst_in: endpoint {
> +                    remote-endpoint = <&dp_input_sst_0>;
> +                    data-lanes = <0 1 2 3>;
> +                    link-frequencies = /bits/ 64 <1620000000 2700000000
> +                                                  5400000000 8100000000>;
> +                };
> +            };
> +
> +            port@1 {
> +                reg = <1>;
> +                dprx_sst_0: endpoint {
> +                    remote-endpoint = <&video_sst_0>;
> +                };
> +            };
> +        };
> +    };
> -- 
> 2.45.0.rc1.225.g2a3ae87e7f-goog
> 

  reply	other threads:[~2024-05-10 21:24 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-05-07 15:54 [PATCH v3 00/10] Add Chameleon v3 video support Paweł Anikiel
2024-05-07 15:54 ` [PATCH v3 01/10] media: Add Chameleon v3 video interface driver Paweł Anikiel
2024-06-03  7:57   ` Hans Verkuil
2024-06-03 14:32     ` Paweł Anikiel
2024-06-03 14:56       ` Hans Verkuil
2024-06-04 12:03         ` Paweł Anikiel
2024-06-04 12:46           ` Hans Verkuil
2024-05-07 15:54 ` [PATCH v3 02/10] drm/dp_mst: Move DRM-independent structures to separate header Paweł Anikiel
2024-05-07 15:54 ` [PATCH v3 03/10] lib: Move DisplayPort CRC functions to common lib Paweł Anikiel
2024-05-07 15:54 ` [PATCH v3 04/10] drm/display: Add mask definitions for DP_PAYLOAD_ALLOCATE_* registers Paweł Anikiel
2024-05-07 15:54 ` [PATCH v3 05/10] media: dt-bindings: video-interfaces: Support DisplayPort MST Paweł Anikiel
2024-05-10 21:16   ` Rob Herring
2024-05-13 11:07     ` Paweł Anikiel
2024-05-13 14:56   ` Rob Herring (Arm)
2024-05-07 15:54 ` [PATCH v3 06/10] media: v4l2-mediabus: Add support for DisplayPort media bus Paweł Anikiel
2024-05-07 15:54 ` [PATCH v3 07/10] media: intel: Add Displayport RX IP driver Paweł Anikiel
2024-06-03  8:37   ` Hans Verkuil
2024-06-04 12:32     ` Paweł Anikiel
2024-06-07 12:04       ` Hans Verkuil
2024-05-07 15:54 ` [PATCH v3 08/10] media: dt-bindings: Add Chameleon v3 video interface Paweł Anikiel
2024-05-10 21:25   ` Rob Herring (Arm)
2024-05-07 15:54 ` [PATCH v3 09/10] media: dt-bindings: Add Intel Displayport RX IP Paweł Anikiel
2024-05-10 21:24   ` Rob Herring [this message]
2024-05-13 10:39     ` Paweł Anikiel
2024-05-07 15:54 ` [PATCH v3 10/10] ARM: dts: chameleonv3: Add video device nodes Paweł Anikiel
2024-06-03  8:44 ` [PATCH v3 00/10] Add Chameleon v3 video support Hans Verkuil

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240510212442.GA758313-robh@kernel.org \
    --to=robh@kernel.org \
    --cc=airlied@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=chromeos-krk-upstreaming@google.com \
    --cc=conor+dt@kernel.org \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dinguyen@kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=mchehab@kernel.org \
    --cc=mripard@kernel.org \
    --cc=panikiel@google.com \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.