From: Elias El Yandouzi <eliasely@amazon.com>
To: <xen-devel@lists.xenproject.org>
Cc: <julien@xen.org>, <pdurrant@amazon.com>, <dwmw@amazon.com>,
Hongyan Xia <hongyxia@amazon.com>,
Julien Grall <jgrall@amazon.com>
Subject: [PATCH V3 09/19] x86/domain_page: Remove the fast paths when mfn is not in the directmap
Date: Mon, 13 May 2024 11:11:07 +0000 [thread overview]
Message-ID: <20240513111117.68828-10-eliasely@amazon.com> (raw)
In-Reply-To: <20240513111117.68828-1-eliasely@amazon.com>
From: Hongyan Xia <hongyxia@amazon.com>
When mfn is not in direct map, never use mfn_to_virt for any mappings.
We replace mfn_x(mfn) <= PFN_DOWN(__pa(HYPERVISOR_VIRT_END - 1)) with
arch_mfns_in_direct_map(mfn, 1) because these two are equivalent. The
extra comparison in arch_mfns_in_direct_map() looks different but because
DIRECTMAP_VIRT_END is always higher, it does not make any difference.
Lastly, domain_page_map_to_mfn() needs to gain to a special case for
the PMAP.
Signed-off-by: Hongyan Xia <hongyxia@amazon.com>
Signed-off-by: Julien Grall <jgrall@amazon.com>
----
Changes since Hongyan's version:
* arch_mfn_in_direct_map() was renamed to arch_mfns_in_directmap()
* add a special case for the PMAP in domain_page_map_to_mfn()
diff --git a/xen/arch/x86/domain_page.c b/xen/arch/x86/domain_page.c
index 55e337aaf7..89caefc8a2 100644
--- a/xen/arch/x86/domain_page.c
+++ b/xen/arch/x86/domain_page.c
@@ -14,8 +14,10 @@
#include <xen/sched.h>
#include <xen/vmap.h>
#include <asm/current.h>
+#include <asm/fixmap.h>
#include <asm/flushtlb.h>
#include <asm/hardirq.h>
+#include <asm/pmap.h>
#include <asm/setup.h>
static DEFINE_PER_CPU(struct vcpu *, override);
@@ -35,10 +37,11 @@ static inline struct vcpu *mapcache_current_vcpu(void)
/*
* When using efi runtime page tables, we have the equivalent of the idle
* domain's page tables but current may point at another domain's VCPU.
- * Return NULL as though current is not properly set up yet.
+ * Return the idle domains's vcpu on that core because the efi per-domain
+ * region (where the mapcache is) is in-sync with the idle domain.
*/
if ( efi_rs_using_pgtables() )
- return NULL;
+ return idle_vcpu[smp_processor_id()];
/*
* If guest_table is NULL, and we are running a paravirtualised guest,
@@ -77,18 +80,24 @@ void *map_domain_page(mfn_t mfn)
struct vcpu_maphash_entry *hashent;
#ifdef NDEBUG
- if ( mfn_x(mfn) <= PFN_DOWN(__pa(HYPERVISOR_VIRT_END - 1)) )
+ if ( arch_mfns_in_directmap(mfn_x(mfn), 1) )
return mfn_to_virt(mfn_x(mfn));
#endif
v = mapcache_current_vcpu();
- if ( !v )
- return mfn_to_virt(mfn_x(mfn));
+ if ( !v || !v->domain->arch.mapcache.inuse )
+ {
+ if ( arch_mfns_in_directmap(mfn_x(mfn), 1) )
+ return mfn_to_virt(mfn_x(mfn));
+ else
+ {
+ BUG_ON(system_state >= SYS_STATE_smp_boot);
+ return pmap_map(mfn);
+ }
+ }
dcache = &v->domain->arch.mapcache;
vcache = &v->arch.mapcache;
- if ( !dcache->inuse )
- return mfn_to_virt(mfn_x(mfn));
perfc_incr(map_domain_page_count);
@@ -184,6 +193,12 @@ void unmap_domain_page(const void *ptr)
if ( !va || va >= DIRECTMAP_VIRT_START )
return;
+ if ( va >= FIXADDR_START && va < FIXADDR_TOP )
+ {
+ pmap_unmap((void *)ptr);
+ return;
+ }
+
ASSERT(va >= MAPCACHE_VIRT_START && va < MAPCACHE_VIRT_END);
v = mapcache_current_vcpu();
@@ -237,7 +252,7 @@ int mapcache_domain_init(struct domain *d)
unsigned int bitmap_pages;
#ifdef NDEBUG
- if ( !mem_hotplug && max_page <= PFN_DOWN(__pa(HYPERVISOR_VIRT_END - 1)) )
+ if ( !mem_hotplug && arch_mfn_in_directmap(0, max_page) )
return 0;
#endif
@@ -308,7 +323,7 @@ void *map_domain_page_global(mfn_t mfn)
local_irq_is_enabled()));
#ifdef NDEBUG
- if ( mfn_x(mfn) <= PFN_DOWN(__pa(HYPERVISOR_VIRT_END - 1)) )
+ if ( arch_mfn_in_directmap(mfn_x(mfn, 1)) )
return mfn_to_virt(mfn_x(mfn));
#endif
@@ -335,6 +350,23 @@ mfn_t domain_page_map_to_mfn(const void *ptr)
if ( va >= DIRECTMAP_VIRT_START )
return _mfn(virt_to_mfn(ptr));
+ /*
+ * The fixmap is stealing the top-end of the VMAP. So the check for
+ * the PMAP *must* happen first.
+ *
+ * Also, the fixmap translate a slot to an address backwards. The
+ * logic will rely on it to avoid any complexity. So check at
+ * compile time this will always hold.
+ */
+ BUILD_BUG_ON(fix_to_virt(FIX_PMAP_BEGIN) < fix_to_virt(FIX_PMAP_END));
+
+ if ( ((unsigned long)fix_to_virt(FIX_PMAP_END) <= va) &&
+ ((va & PAGE_MASK) <= (unsigned long)fix_to_virt(FIX_PMAP_BEGIN)) )
+ {
+ BUG_ON(system_state >= SYS_STATE_smp_boot);
+ return l1e_get_mfn(l1_fixmap[l1_table_offset(va)]);
+ }
+
if ( va >= VMAP_VIRT_START && va < VMAP_VIRT_END )
return vmap_to_mfn(va);
--
2.40.1
next prev parent reply other threads:[~2024-05-13 11:22 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-13 11:10 [PATCH V3 00/19] Remove the directmap Elias El Yandouzi
2024-05-13 11:10 ` [PATCH V3 01/19] x86: Create per-domain mapping of guest_root_pt Elias El Yandouzi
2024-05-13 15:27 ` Roger Pau Monné
2024-05-14 8:03 ` Jan Beulich
2024-05-14 15:46 ` Alejandro Vallejo
2024-05-14 17:15 ` Elias El Yandouzi
2024-05-15 9:05 ` Roger Pau Monné
2024-05-13 11:11 ` [PATCH V3 02/19] x86/pv: Domheap pages should be mapped while relocating initrd Elias El Yandouzi
2024-05-13 11:11 ` [PATCH V3 03/19] x86/pv: Rewrite how building PV dom0 handles domheap mappings Elias El Yandouzi
2024-05-13 11:11 ` [PATCH V3 04/19] x86: Lift mapcache variable to the arch level Elias El Yandouzi
2024-05-13 11:11 ` [PATCH V3 05/19] x86/mapcache: Initialise the mapcache for the idle domain Elias El Yandouzi
2024-05-13 11:11 ` [PATCH V3 06/19] x86: Add a boot option to enable and disable the direct map Elias El Yandouzi
2024-05-13 11:11 ` [PATCH V3 07/19] xen/x86: Add support for the PMAP Elias El Yandouzi
2024-05-13 11:11 ` [PATCH V3 08/19] xen/x86: Add build assertion for fixmap entries Elias El Yandouzi
2024-05-13 11:11 ` Elias El Yandouzi [this message]
2024-05-13 11:11 ` [PATCH V3 10/19] xen/page_alloc: Add a path for xenheap when there is no direct map Elias El Yandouzi
2024-05-13 11:11 ` [PATCH V3 11/19] x86/setup: Leave early boot slightly earlier Elias El Yandouzi
2024-05-13 11:11 ` [PATCH V3 12/19] x86/setup: vmap heap nodes when they are outside the direct map Elias El Yandouzi
2024-05-13 11:11 ` [PATCH V3 13/19] x86/setup: Do not create valid mappings when directmap=no Elias El Yandouzi
2024-05-13 11:11 ` [PATCH V3 14/19] Rename mfn_to_virt() calls Elias El Yandouzi
2024-05-13 11:11 ` [PATCH V3 15/19] Rename maddr_to_virt() calls Elias El Yandouzi
2024-05-13 11:11 ` [PATCH V3 16/19] xen/arm32: mm: Rename 'first' to 'root' in init_secondary_pagetables() Elias El Yandouzi
2024-05-13 11:11 ` [PATCH V3 17/19] xen/arm64: mm: Use per-pCPU page-tables Elias El Yandouzi
2024-05-13 11:11 ` [PATCH V3 18/19] xen/arm64: Implement a mapcache for arm64 Elias El Yandouzi
2024-05-13 11:11 ` [PATCH V3 19/19] xen/arm64: Allow the admin to enable/disable the directmap Elias El Yandouzi
2024-05-13 12:52 ` [PATCH V3 00/19] Remove " Roger Pau Monné
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240513111117.68828-10-eliasely@amazon.com \
--to=eliasely@amazon.com \
--cc=dwmw@amazon.com \
--cc=hongyxia@amazon.com \
--cc=jgrall@amazon.com \
--cc=julien@xen.org \
--cc=pdurrant@amazon.com \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.