All of lore.kernel.org
 help / color / mirror / Atom feed
From: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
To: davem@davemloft.net, kuba@kernel.org
Cc: linux-bluetooth@vger.kernel.org, netdev@vger.kernel.org
Subject: pull request: bluetooth-next 2024-05-14
Date: Tue, 14 May 2024 11:02:05 -0400	[thread overview]
Message-ID: <20240514150206.606432-1-luiz.dentz@gmail.com> (raw)

The following changes since commit 5c1672705a1a2389f5ad78e0fea6f08ed32d6f18:

  net: revert partially applied PHY topology series (2024-05-13 18:35:02 -0700)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git tags/for-net-next-2024-05-14

for you to fetch changes up to 6a486c1361ea588938898ae812b32dcfbd4022f2:

  Bluetooth: btintel_pcie: Refactor and code cleanup (2024-05-14 10:58:30 -0400)

----------------------------------------------------------------
bluetooth-next pull request for net-next:

 - Add support MediaTek MT7921S SDIO
 - Various fixes for -Wflex-array-member-not-at-end and -Wfamnae
 - Add USB HW IDs for MT7921/MT7922/MT7925
 - Add support for Intel BlazarI and Filmore Peak2 (BE201)
 - Add initial support for Intel PCIe driver
 - Remove HCI_AMP support

----------------------------------------------------------------
Archie Pusaka (1):
      Bluetooth: Populate hci_set_hw_info for Intel and Realtek

Chen-Yu Tsai (1):
      dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth

Dan Carpenter (1):
      Bluetooth: qca: Fix error code in qca_read_fw_build_info()

Gustavo A. R. Silva (6):
      Bluetooth: L2CAP: Avoid -Wflex-array-member-not-at-end warnings
      Bluetooth: hci_conn, hci_sync: Use __counted_by() to avoid -Wfamnae warnings
      Bluetooth: hci_conn: Use __counted_by() to avoid -Wfamnae warning
      Bluetooth: hci_conn: Use struct_size() in hci_le_big_create_sync()
      Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
      Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning

Hans de Goede (1):
      Bluetooth: hci_bcm: Limit bcm43455 baudrate to 2000000

Ian W MORRISON (1):
      Bluetooth: Add support for MediaTek MT7922 device

Iulia Tanasescu (2):
      Bluetooth: ISO: Make iso_get_sock_listen generic
      Bluetooth: ISO: Handle PA sync when no BIGInfo reports are generated

Jiande Lu (2):
      Bluetooth: btusb: Add USB HW IDs for MT7921/MT7922/MT7925
      Bluetooth: btusb: Sort usb_device_id table by the ID

Johan Hovold (3):
      Bluetooth: qca: drop bogus edl header checks
      Bluetooth: qca: drop bogus module version
      Bluetooth: qca: clean up defines

Kiran K (10):
      Bluetooth: btintel: Define macros for image types
      Bluetooth: btintel: Add support to download intermediate loader
      Bluetooth: btintel: Add support for BlazarI
      Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
      Bluetooth: btintel: Export few static functions
      Bluetooth: btintel_pcie: Add *setup* function to download firmware
      Bluetooth: btintel_pcie: Fix compiler warnings
      Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
      Bluetooth: btintel_pcie: Fix warning reported by sparse
      Bluetooth: btintel_pcie: Refactor and code cleanup

Luiz Augusto von Dentz (4):
      Bluetooth: Add proper definitions for scan interval and window
      Bluetooth: hci_event: Set DISCOVERY_FINDING on SCAN_ENABLED
      Bluetooth: HCI: Remove HCI_AMP support
      Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1

Mahesh Talewad (1):
      LE Create Connection command timeout increased to 20 secs

Marek Vasut (1):
      dt-bindings: net: broadcom-bluetooth: Add CYW43439 DT binding

Peter Tsao (1):
      Bluetooth: btusb: Fix the patch for MT7920 the affected to MT7921

Sebastian Urban (1):
      Bluetooth: compute LE flow credits based on recvbuf space

Sungwoo Kim (1):
      Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()

Tedd Ho-Jeong An (1):
      Bluetooth: btintel_pcie: Add support for PCIe transport

Uri Arev (2):
      Bluetooth: hci_intel: Fix multiple issues reported by checkpatch.pl
      Bluetooth: ath3k: Fix multiple issues reported by checkpatch.pl

Uwe Kleine-König (3):
      Bluetooth: btqcomsmd: Convert to platform remove callback returning void
      Bluetooth: hci_bcm: Convert to platform remove callback returning void
      Bluetooth: hci_intel: Convert to platform remove callback returning void

Zijun Hu (4):
      Bluetooth: btusb: Correct timeout macro argument used to receive control message
      Bluetooth: hci_conn: Remove a redundant check for HFP offload
      Bluetooth: Remove 3 repeated macro definitions
      Bluetooth: qca: Support downloading board id specific NVM for WCN7850

 .../net/bluetooth/mediatek,mt7921s-bluetooth.yaml  |   55 +
 .../bindings/net/broadcom-bluetooth.yaml           |   33 +-
 MAINTAINERS                                        |    1 +
 drivers/bluetooth/Kconfig                          |   11 +
 drivers/bluetooth/Makefile                         |    1 +
 drivers/bluetooth/ath3k.c                          |   25 +-
 drivers/bluetooth/btintel.c                        |   88 +-
 drivers/bluetooth/btintel.h                        |   51 +-
 drivers/bluetooth/btintel_pcie.c                   | 1357 ++++++++++++++++++++
 drivers/bluetooth/btintel_pcie.h                   |  430 +++++++
 drivers/bluetooth/btmrvl_main.c                    |    9 -
 drivers/bluetooth/btqca.c                          |   47 +-
 drivers/bluetooth/btqca.h                          |   60 +-
 drivers/bluetooth/btqcomsmd.c                      |    6 +-
 drivers/bluetooth/btrsi.c                          |    1 -
 drivers/bluetooth/btrtl.c                          |    7 +
 drivers/bluetooth/btsdio.c                         |    8 -
 drivers/bluetooth/btusb.c                          |   55 +-
 drivers/bluetooth/hci_bcm.c                        |    8 +-
 drivers/bluetooth/hci_bcm4377.c                    |    1 -
 drivers/bluetooth/hci_intel.c                      |   25 +-
 drivers/bluetooth/hci_ldisc.c                      |    6 -
 drivers/bluetooth/hci_serdev.c                     |    5 -
 drivers/bluetooth/hci_uart.h                       |    1 -
 drivers/bluetooth/hci_vhci.c                       |   10 +-
 drivers/bluetooth/virtio_bt.c                      |    2 -
 include/net/bluetooth/bluetooth.h                  |    2 +-
 include/net/bluetooth/hci.h                        |  136 +-
 include/net/bluetooth/hci_core.h                   |   69 +-
 include/net/bluetooth/l2cap.h                      |   33 +-
 include/uapi/linux/virtio_bt.h                     |    1 -
 net/bluetooth/hci_conn.c                           |  150 ++-
 net/bluetooth/hci_core.c                           |  170 +--
 net/bluetooth/hci_event.c                          |  240 +---
 net/bluetooth/hci_request.h                        |    4 -
 net/bluetooth/hci_sock.c                           |    5 +-
 net/bluetooth/hci_sync.c                           |  207 +--
 net/bluetooth/iso.c                                |  151 ++-
 net/bluetooth/l2cap_core.c                         |  140 +-
 net/bluetooth/l2cap_sock.c                         |   91 +-
 net/bluetooth/mgmt.c                               |   84 +-
 net/bluetooth/sco.c                                |    6 +-
 42 files changed, 2651 insertions(+), 1141 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7921s-bluetooth.yaml
 create mode 100644 drivers/bluetooth/btintel_pcie.c
 create mode 100644 drivers/bluetooth/btintel_pcie.h

             reply	other threads:[~2024-05-14 15:02 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-05-14 15:02 Luiz Augusto von Dentz [this message]
2024-05-14 16:10 ` pull request: bluetooth-next 2024-05-14 patchwork-bot+netdevbpf
2024-06-10 14:03 ` patchwork-bot+bluetooth

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240514150206.606432-1-luiz.dentz@gmail.com \
    --to=luiz.dentz@gmail.com \
    --cc=davem@davemloft.net \
    --cc=kuba@kernel.org \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.