From: Steven Rostedt <rostedt@goodmis.org>
To: linux-kernel@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>,
Andrew Morton <akpm@linux-foundation.org>,
Vincent Donnefort <vdonnefort@google.com>
Subject: [for-next][PATCH 4/6] Documentation: tracing: Add ring-buffer mapping
Date: Tue, 14 May 2024 12:16:02 -0400 [thread overview]
Message-ID: <20240514161630.596942907@goodmis.org> (raw)
In-Reply-To: 20240514161558.664348429@goodmis.org
From: Vincent Donnefort <vdonnefort@google.com>
It is now possible to mmap() a ring-buffer to stream its content. Add
some documentation and a code example.
Link: https://lore.kernel.org/linux-trace-kernel/20240510140435.3550353-5-vdonnefort@google.com
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
---
Documentation/trace/index.rst | 1 +
Documentation/trace/ring-buffer-map.rst | 106 ++++++++++++++++++++++++
2 files changed, 107 insertions(+)
create mode 100644 Documentation/trace/ring-buffer-map.rst
diff --git a/Documentation/trace/index.rst b/Documentation/trace/index.rst
index 5092d6c13af5..0b300901fd75 100644
--- a/Documentation/trace/index.rst
+++ b/Documentation/trace/index.rst
@@ -29,6 +29,7 @@ Linux Tracing Technologies
timerlat-tracer
intel_th
ring-buffer-design
+ ring-buffer-map
stm
sys-t
coresight/index
diff --git a/Documentation/trace/ring-buffer-map.rst b/Documentation/trace/ring-buffer-map.rst
new file mode 100644
index 000000000000..8e296bcc0d7f
--- /dev/null
+++ b/Documentation/trace/ring-buffer-map.rst
@@ -0,0 +1,106 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==================================
+Tracefs ring-buffer memory mapping
+==================================
+
+:Author: Vincent Donnefort <vdonnefort@google.com>
+
+Overview
+========
+Tracefs ring-buffer memory map provides an efficient method to stream data
+as no memory copy is necessary. The application mapping the ring-buffer becomes
+then a consumer for that ring-buffer, in a similar fashion to trace_pipe.
+
+Memory mapping setup
+====================
+The mapping works with a mmap() of the trace_pipe_raw interface.
+
+The first system page of the mapping contains ring-buffer statistics and
+description. It is referred to as the meta-page. One of the most important
+fields of the meta-page is the reader. It contains the sub-buffer ID which can
+be safely read by the mapper (see ring-buffer-design.rst).
+
+The meta-page is followed by all the sub-buffers, ordered by ascending ID. It is
+therefore effortless to know where the reader starts in the mapping:
+
+.. code-block:: c
+
+ reader_id = meta->reader->id;
+ reader_offset = meta->meta_page_size + reader_id * meta->subbuf_size;
+
+When the application is done with the current reader, it can get a new one using
+the trace_pipe_raw ioctl() TRACE_MMAP_IOCTL_GET_READER. This ioctl also updates
+the meta-page fields.
+
+Limitations
+===========
+When a mapping is in place on a Tracefs ring-buffer, it is not possible to
+either resize it (either by increasing the entire size of the ring-buffer or
+each subbuf). It is also not possible to use snapshot and causes splice to copy
+the ring buffer data instead of using the copyless swap from the ring buffer.
+
+Concurrent readers (either another application mapping that ring-buffer or the
+kernel with trace_pipe) are allowed but not recommended. They will compete for
+the ring-buffer and the output is unpredictable, just like concurrent readers on
+trace_pipe would be.
+
+Example
+=======
+
+.. code-block:: c
+
+ #include <fcntl.h>
+ #include <stdio.h>
+ #include <stdlib.h>
+ #include <unistd.h>
+
+ #include <linux/trace_mmap.h>
+
+ #include <sys/mman.h>
+ #include <sys/ioctl.h>
+
+ #define TRACE_PIPE_RAW "/sys/kernel/tracing/per_cpu/cpu0/trace_pipe_raw"
+
+ int main(void)
+ {
+ int page_size = getpagesize(), fd, reader_id;
+ unsigned long meta_len, data_len;
+ struct trace_buffer_meta *meta;
+ void *map, *reader, *data;
+
+ fd = open(TRACE_PIPE_RAW, O_RDONLY | O_NONBLOCK);
+ if (fd < 0)
+ exit(EXIT_FAILURE);
+
+ map = mmap(NULL, page_size, PROT_READ, MAP_SHARED, fd, 0);
+ if (map == MAP_FAILED)
+ exit(EXIT_FAILURE);
+
+ meta = (struct trace_buffer_meta *)map;
+ meta_len = meta->meta_page_size;
+
+ printf("entries: %llu\n", meta->entries);
+ printf("overrun: %llu\n", meta->overrun);
+ printf("read: %llu\n", meta->read);
+ printf("nr_subbufs: %u\n", meta->nr_subbufs);
+
+ data_len = meta->subbuf_size * meta->nr_subbufs;
+ data = mmap(NULL, data_len, PROT_READ, MAP_SHARED, fd, meta_len);
+ if (data == MAP_FAILED)
+ exit(EXIT_FAILURE);
+
+ if (ioctl(fd, TRACE_MMAP_IOCTL_GET_READER) < 0)
+ exit(EXIT_FAILURE);
+
+ reader_id = meta->reader.id;
+ reader = data + meta->subbuf_size * reader_id;
+
+ printf("Current reader address: %p\n", reader);
+
+ munmap(data, data_len);
+ munmap(meta, meta_len);
+ close (fd);
+
+ return 0;
+ }
--
2.43.0
next prev parent reply other threads:[~2024-05-14 16:16 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-14 16:15 [for-next][PATCH 0/6] ring-buffer: Memmory mapping the ring buffer to user space Steven Rostedt
2024-05-14 16:15 ` [for-next][PATCH 1/6] ring-buffer: Allocate sub-buffers with __GFP_COMP Steven Rostedt
2024-05-14 16:16 ` [for-next][PATCH 2/6] ring-buffer: Introducing ring-buffer mapping functions Steven Rostedt
2024-05-14 16:16 ` [for-next][PATCH 3/6] tracing: Allow user-space mapping of the ring-buffer Steven Rostedt
2024-05-14 16:16 ` Steven Rostedt [this message]
2024-05-14 16:16 ` [for-next][PATCH 5/6] ring-buffer/selftest: Add ring-buffer mapping test Steven Rostedt
2024-05-14 16:16 ` [for-next][PATCH 6/6] ring-buffer: Have mmapped ring buffer keep track of missed events Steven Rostedt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240514161630.596942907@goodmis.org \
--to=rostedt@goodmis.org \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mathieu.desnoyers@efficios.com \
--cc=mhiramat@kernel.org \
--cc=vdonnefort@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.