All of lore.kernel.org
 help / color / mirror / Atom feed
From: Denys Dmytriyenko <denis@denix.org>
To: Joel Winarske <joel.winarske@gmail.com>
Cc: meta-ti@lists.yoctoproject.org
Subject: Re: [meta-ti] beagle bone black - scarthgap
Date: Tue, 14 May 2024 16:55:31 -0400	[thread overview]
Message-ID: <20240514205531.GI21287@denix.org> (raw)
In-Reply-To: <CABKMkPJ8grzYqQv22xU4pEKSxhoxx0voSSt_KzGT-13xyDQN0A@mail.gmail.com>

1. U-boot and SPL seem to be old from Dunfell

2. Check your env:

> append: root=PARTUUID= rootwait rw earlycon console=ttyO0,115200n8,115200
...
> [    3.961253] VFS: PARTUUID= is invalid.
> [    3.961253] Expected PARTUUID=<valid-uuid-id>[/PARTNROFF=%d]
> [    3.970800] Disabling rootwait; root= is invalid.
> [    3.977324] /dev/root: Can't open blockdev
> [    3.981716] VFS: Cannot open root device "PARTUUID=" or
> unknown-block(0,0): error -6
> [    3.989649] Please append a correct "root=" boot option; here are the

-- 
Denys


On Tue, May 14, 2024 at 01:24:37PM -0700, Joel Winarske wrote:
> What's the status of bbb on scarthgap?
> 
> Three weeks or so ago it would boot, only SGX driver was not loading.
> 
> Today I get a kernel panic.  Last week Scott Murray was saying to set
> kernel preference to 6.1, which appears to be the default now.
> 
> I would appreciate any assistance with this.
> 
> 
> U-Boot SPL 2019.04-00002-g31a8ae0206 (May 13 2020 - 09:26:17 -0500)
> Trying to boot from MMC2
> Loading Environment from EXT4...
> ** Unable to use mmc 0:1 for loading the env **
> 
> 
> U-Boot 2019.04-00002-g31a8ae0206 (May 13 2020 - 09:26:17 -0500), Build:
> jenkins-github_Bootloader-Builder-139
> 
> CPU  : AM335X-GP rev 2.1
> I2C:   ready
> DRAM:  512 MiB
> No match for driver 'omap_hsmmc'
> No match for driver 'omap_hsmmc'
> Some drivers were not found
> Reset Source: Power-on reset has occurred.
> RTC 32KCLK Source: External.
> MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
> Loading Environment from EXT4...
> ** Unable to use mmc 0:1 for loading the env **
> Board: BeagleBone Black
> <ethaddr> not set. Validating first E-fuse MAC
> BeagleBone Black:
> BeagleBone: cape eeprom: i2c_probe: 0x54:
> BeagleBone: cape eeprom: i2c_probe: 0x55:
> BeagleBone: cape eeprom: i2c_probe: 0x56:
> BeagleBone: cape eeprom: i2c_probe: 0x57:
> Net:   eth0: MII MODE
> cpsw, usb_ether
> Press SPACE to abort autoboot in 0 seconds
> board_name=[A335BNLT] ...
> board_rev=[00C0] ...
> switch to partitions #0, OK
> mmc0 is current device
> SD/MMC found on device 0
> switch to partitions #0, OK
> mmc0 is current device
> Scanning mmc 0:1...
> Found /extlinux/extlinux.conf
> Retrieving file: /extlinux/extlinux.conf
> 218 bytes read in 6 ms (35.2 KiB/s)
> 1:      Poky (Yocto Project Reference Distro)
> Retrieving file: /extlinux/../zImage
> 12653056 bytes read in 800 ms (15.1 MiB/s)
> append: root=PARTUUID= rootwait rw earlycon console=ttyO0,115200n8,115200
> Retrieving file: /extlinux/../am335x-boneblack.dtb
> 99078 bytes read in 13 ms (7.3 MiB/s)
> ## Flattened Device Tree blob at 88000000
>    Booting using the fdt blob at 0x88000000
>    Loading Device Tree to 8ffe4000, end 8ffff305 ... OK
> 
> Starting kernel ...
> 
> [    0.000000] Booting Linux on physical CPU 0x0
> [    0.000000] Linux version 6.1.69-ti (oe-user@oe-host)
> (arm-poky-linux-gnueabi-gcc (GCC) 13.2.0, GNU ld (GNU Binutils)
> 2.42.0.20240216) #1 SMP PREEMPT Mon Jan 29 18:204
> [    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7),
> cr=10c5387d
> [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
> instruction cache
> [    0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black
> [    0.000000] earlycon: omap8250 at MMIO 0x44e09000 (options '')
> [    0.000000] printk: bootconsole [omap8250] enabled
> [    0.000000] Memory policy: Data cache writeback
> [    0.000000] efi: UEFI not found.
> [    0.000000] cma: Reserved 48 MiB at 0x9c800000
> [    0.000000] Zone ranges:
> [    0.000000]   Normal   [mem 0x0000000080000000-0x000000009fdfffff]
> [    0.000000]   HighMem  empty
> [    0.000000] Movable zone start for each node
> [    0.000000] Early memory node ranges
> [    0.000000]   node   0: [mem 0x0000000080000000-0x000000009fdfffff]
> [    0.000000] Initmem setup node 0 [mem
> 0x0000000080000000-0x000000009fdfffff]
> [    0.000000] CPU: All CPU(s) started in SVC mode.
> [    0.000000] AM335X ES2.1 (sgx neon)
> [    0.000000] percpu: Embedded 18 pages/cpu s41428 r8192 d24108 u73728
> [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 129412
> [    0.000000] Kernel command line: root=PARTUUID= rootwait rw earlycon
> console=ttyO0,115200n8,115200
> [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144
> bytes, linear)
> [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072
> bytes, linear)
> [    0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
> [    0.000000] Memory: 442892K/522240K available (16384K kernel code, 1686K
> rwdata, 4440K rodata, 1024K init, 455K bss, 30196K reserved, 49152K
> cma-reserved, 0K highmem)
> [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
> [    0.000000] ftrace: allocating 50610 entries in 149 pages
> [    0.000000] ftrace: allocated 149 pages with 4 groups
> [    0.000000] trace event string verifier disabled
> [    0.000000] rcu: Preemptible hierarchical RCU implementation.
> [    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
> [    0.000000]  Trampoline variant of Tasks RCU enabled.
> [    0.000000]  Rude variant of Tasks RCU enabled.
> [    0.000000]  Tracing variant of Tasks RCU enabled.
> [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is
> 25 jiffies.
> [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
> [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
> [    0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128
> interrupts
> [    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on
> contention.
> [    0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000
> /segment@200000/target-module@31000
> [    0.000002] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every
> 89478484971ns
> [    0.008068] clocksource: dmtimer: mask: 0xffffffff max_cycles:
> 0xffffffff, max_idle_ns: 79635851949 ns
> [    0.018002] TI gptimer clockevent: 24000000 Hz at
> /ocp/interconnect@48000000/segment@0/target-module@40000
> [    0.029329] Console: colour dummy device 80x30
> [    0.034029] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
> [    0.040765] This ensures that you still see kernel messages. Please
> [    0.047223] update your kernel commandline.
> [    0.051587] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656)
> [    0.074478] CPU: Testing write buffer coherency: ok
> [    0.079591] CPU0: Spectre v2: using BPIALL workaround
> [    0.084801] pid_max: default: 32768 minimum: 301
> [    0.090028] LSM: Security Framework initializing
> [    0.094923] landlock: Up and running.
> [    0.098710] Yama: becoming mindful.
> [    0.102614] AppArmor: AppArmor initialized
> [    0.106865] TOMOYO Linux initialized
> [    0.110599] LSM support for eBPF active
> [    0.114831] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes,
> linear)
> [    0.122385] Mountpoint-cache hash table entries: 1024 (order: 0, 4096
> bytes, linear)
> [    0.134142] cblist_init_generic: Setting adjustable number of callback
> queues.
> [    0.141692] cblist_init_generic: Setting shift to 0 and lim to 1.
> [    0.148206] cblist_init_generic: Setting adjustable number of callback
> queues.
> [    0.155687] cblist_init_generic: Setting shift to 0 and lim to 1.
> [    0.162178] cblist_init_generic: Setting adjustable number of callback
> queues.
> [    0.169653] cblist_init_generic: Setting shift to 0 and lim to 1.
> [    0.176195] Setting up static identity map for 0x80100000 - 0x80100060
> [    0.183196] rcu: Hierarchical SRCU implementation.
> [    0.188174] rcu:     Max phase no-delay instances is 1000.
> [    0.195209] EFI services will not be available.
> [    0.200736] smp: Bringing up secondary CPUs ...
> [    0.205481] smp: Brought up 1 node, 1 CPU
> [    0.209628] SMP: Total of 1 processors activated (995.32 BogoMIPS).
> [    0.216099] CPU: All CPU(s) started in SVC mode.
> [    0.221891] devtmpfs: initialized
> [    0.248887] VFP support v0.3: implementor 41 architecture 3 part 30
> variant c rev 3
> [    0.257438] clocksource: jiffies: mask: 0xffffffff max_cycles:
> 0xffffffff, max_idle_ns: 7645041785100000 ns
> [    0.267544] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
> [    0.279749] pinctrl core: initialized pinctrl subsystem
> [    0.286562] DMI not present or invalid.
> [    0.291573] NET: Registered PF_NETLINK/PF_ROUTE protocol family
> [    0.306527] DMA: preallocated 256 KiB pool for atomic coherent
> allocations
> [    0.314286] audit: initializing netlink subsys (disabled)
> [    0.321360] thermal_sys: Registered thermal governor 'fair_share'
> [    0.321384] thermal_sys: Registered thermal governor 'bang_bang'
> [    0.327762] audit: type=2000 audit(0.232:1): state=initialized
> audit_enabled=0 res=1
> [    0.341952] thermal_sys: Registered thermal governor 'step_wise'
> [    0.341961] thermal_sys: Registered thermal governor 'user_space'
> [    0.348159] thermal_sys: Registered thermal governor 'power_allocator'
> [    0.354588] cpuidle: using governor ladder
> [    0.365590] cpuidle: using governor menu
> [    0.392937] hw-breakpoint: debug architecture 0x4 unsupported.
> [    0.413611] kprobes: kprobe jump-optimization is enabled. All kprobes
> are optimized if possible.
> [    0.441354] raid6: skipped pq benchmark and selected neonx8
> [    0.452017] raid6: using neon recovery algorithm
> [    0.468087] iommu: Default domain type: Translated
> [    0.473185] iommu: DMA domain TLB invalidation policy: strict mode
> [    0.489780] SCSI subsystem initialized
> [    0.501001] usbcore: registered new interface driver usbfs
> [    0.512146] usbcore: registered new interface driver hub
> [    0.524089] usbcore: registered new device driver usb
> [    0.536781] pps_core: LinuxPPS API ver. 1 registered
> [    0.548015] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
> Giometti <giometti@linux.it>
> [    0.564043] PTP clock support registered
> [    0.577552] NetLabel: Initializing
> [    0.588018] NetLabel:  domain hash size = 128
> [    0.592525] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
> [    0.604158] NetLabel:  unlabeled traffic allowed by default
> [    0.620692] clocksource: Switched to clocksource dmtimer
> [    0.634086] VFS: Disk quotas dquot_6.6.0
> [    0.644882] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096
> bytes)
> [    0.656972] FS-Cache: Loaded
> [    0.664821] CacheFiles: Loaded
> [    0.673204] AppArmor: AppArmor Filesystem Enabled
> [    0.704059] NET: Registered PF_INET protocol family
> [    0.717040] IP idents hash table entries: 8192 (order: 4, 65536 bytes,
> linear)
> [    0.734482] tcp_listen_portaddr_hash hash table entries: 512 (order: 0,
> 4096 bytes, linear)
> [    0.752899] Table-perturb hash table entries: 65536 (order: 6, 262144
> bytes, linear)
> [    0.768718] TCP established hash table entries: 4096 (order: 2, 16384
> bytes, linear)
> [    0.784765] TCP bind hash table entries: 4096 (order: 4, 65536 bytes,
> linear)
> [    0.800775] TCP: Hash tables configured (established 4096 bind 4096)
> [    0.813054] MPTCP token hash table entries: 512 (order: 1, 8192 bytes,
> linear)
> [    0.828795] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
> [    0.844723] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes,
> linear)
> [    0.857230] NET: Registered PF_UNIX/PF_LOCAL protocol family
> [    0.873449] RPC: Registered named UNIX socket transport module.
> [    0.884695] RPC: Registered udp transport module.
> [    0.892688] RPC: Registered tcp transport module.
> [    0.904698] RPC: Registered tcp NFSv4.1 backchannel transport module.
> [    0.916707] NET: Registered PF_XDP protocol family
> [    2.057584] Initialise system trusted keyrings
> [    2.064353] workingset: timestamp_bits=14 max_order=17 bucket_order=3
> [    2.081692] zbud: loaded
> [    2.089227] NFS: Registering the id_resolver key type
> [    2.094600] Key type id_resolver registered
> [    2.098937] Key type id_legacy registered
> [    2.103293] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
> [    2.110222] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver
> Registering...
> [    2.117932] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat,
> Inc.
> [    2.126320] fuse: init (API version 7.37)
> [    2.223398] NET: Registered PF_ALG protocol family
> [    2.228520] xor: measuring software checksum speed
> [    2.241238]    arm4regs        :  1270 MB/sec
> [    2.254710]    8regs           :  1099 MB/sec
> [    2.268180]    32regs          :  1099 MB/sec
> [    2.278200]    neon            :  1783 MB/sec
> [    2.282696] xor: using function: neon (1783 MB/sec)
> [    2.287741] Key type asymmetric registered
> [    2.291976] Asymmetric key parser 'x509' registered
> [    2.299642] alg: self-tests for CTR-KDF (hmac(sha256)) passed
> [    2.306168] Block layer SCSI generic (bsg) driver version 0.4 loaded
> (major 244)
> [    2.314270] io scheduler mq-deadline registered
> [    2.326615] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
> [    2.354956] loop: module loaded
> [    2.358858] SPI driver tps6594 has no spi_device_id for ti,tps6594-q1
> [    2.365541] SPI driver tps6594 has no spi_device_id for ti,tps6593-q1
> [    2.372185] SPI driver tps6594 has no spi_device_id for ti,lp8764-q1
> [    2.383380] usbcore: registered new interface driver smsc95xx
> [    2.393632] i2c_dev: i2c /dev entries driver
> [    2.398311] Driver for 1-wire Dallas network protocol.
> [    2.405002] softdog: initialized. soft_noboot=0 soft_margin=60 sec
> soft_panic=0 (nowayout=0)
> [    2.413734] softdog:              soft_reboot_cmd=<not set>
> soft_active_on_boot=0
> [    2.422541] cpuidle: enable-method property 'ti,am3352' found operations
> [    2.430352] sdhci: Secure Digital Host Controller Interface driver
> [    2.436776] sdhci: Copyright(c) Pierre Ossman
> [    2.441277] sdhci-pltfm: SDHCI platform and OF driver helper
> [    2.447615] ledtrig-cpu: registered to indicate activity on CPUs
> [    2.454533] hid: raw HID events driver (C) Jiri Kosina
> [    2.460601] usbcore: registered new interface driver usbhid
> [    2.466401] usbhid: USB HID core driver
> [    2.472766] NET: Registered PF_INET6 protocol family
> [    2.482755] Segment Routing with IPv6
> [    2.486926] In-situ OAM (IOAM) with IPv6
> [    2.491263] mip6: Mobile IPv6
> [    2.494566] NET: Registered PF_PACKET protocol family
> [    2.500227] Key type dns_resolver registered
> [    2.504771] mpls_gso: MPLS GSO support
> [    2.508856] ThumbEE CPU extension supported.
> [    2.513298] Registering SWP/SWPB emulation handler
> [    2.518251] omap_voltage_late_init: Voltage driver support not added
> [    2.526359] registered taskstats version 1
> [    2.530792] Loading compiled-in X.509 certificates
> [    2.536739] zswap: loaded using pool lzo/zbud
> [    2.542631] Key type .fscrypt registered
> [    2.546840] Key type fscrypt-provisioning registered
> [    2.561788] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes
> [    2.571469] Key type encrypted registered
> [    2.575883] AppArmor: AppArmor sha1 policy hashing enabled
> [    2.581759] ima: No TPM chip found, activating TPM-bypass!
> [    2.587664] ima: Allocated hash algorithm: sha256
> [    2.592803] ima: No architecture policies found
> [    2.597661] evm: Initialising EVM extended attributes:
> [    2.602985] evm: security.selinux
> [    2.606412] evm: security.SMACK64 (disabled)
> [    2.610825] evm: security.SMACK64EXEC (disabled)
> [    2.615587] evm: security.SMACK64TRANSMUTE (disabled)
> [    2.620799] evm: security.SMACK64MMAP (disabled)
> [    2.625560] evm: security.apparmor
> [    2.629071] evm: security.ima
> [    2.632121] evm: security.capability
> [    2.635810] evm: HMAC attrs: 0x1
> [    2.683301] remoteproc remoteproc0: wkup_m3 is available
> [    2.702524] pinctrl-single 44e10800.pinmux: 142 pins, size 568
> [    2.715024] ti-sysc: probe of 44e31000.target-module failed with error
> -16
> [    2.726119] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60
> sec
> [    2.737737] omap_rtc 44e3e000.rtc: registered as rtc0
> [    2.743061] omap_rtc 44e3e000.rtc: setting system clock to
> 2000-01-01T00:00:00 UTC (946684800)
> [    2.763281] ti-sysc: probe of 48040000.target-module failed with error
> -16
> [    2.785171] gpio gpiochip0: (gpio-0-31): not an immutable chip, please
> consider fixing it!
> [    2.794444] OMAP GPIO hardware version 0.1
> [    2.805375] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
> [    2.818643] at24 2-0054: supply vcc not found, using dummy regulator
> [    2.856849] at24 2-0055: supply vcc not found, using dummy regulator
> [    2.892531] at24 2-0056: supply vcc not found, using dummy regulator
> [    2.928560] at24 2-0057: supply vcc not found, using dummy regulator
> [    2.964125] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
> [    2.975562] gpio gpiochip1: (gpio-32-63): not an immutable chip, please
> consider fixing it!
> [    2.987140] gpio gpiochip2: (gpio-64-95): not an immutable chip, please
> consider fixing it!
> [    3.001969] sdhci-omap 481d8000.mmc: supply pbias not found, using dummy
> regulator
> [    3.018359] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy
> regulator
> [    3.028511] omap_rng 48310000.rng: Random Number Generator ver. 20
> [    3.035855] random: crng init done
> [    3.092730] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus
> freq 1000000
> [    3.126125] SMSC LAN8710/LAN8720: probe of 4a101000.mdio:00 failed with
> error -5
> [    3.133894] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00,
> driver SMSC LAN8710/LAN8720
> [    3.144040] cpsw-switch 4a100000.switch: initialized cpsw ale version 1.4
> [    3.151110] cpsw-switch 4a100000.switch: ALE Table size 1024
> [    3.157084] cpsw-switch 4a100000.switch: cpts: overflow check period
> 1250 (jiffies)
> [    3.165001] cpsw-switch 4a100000.switch: CPTS: ref_clk_freq:250000000
> calc_mult:2147483648 calc_shift:29 error:0 nsec/sec
> [    3.176410] cpsw-switch 4a100000.switch: Detected MACID =
> 68:5e:1c:03:07:bf
> [    3.185575] cpsw-switch 4a100000.switch: initialized (regs 0x4a100000,
> pool size 256) hw_ver:0019010C 1.12 (0)
> [    3.210379] debugfs: Directory '49000000.dma' with parent 'dmaengine'
> already present!
> [    3.218638] edma 49000000.dma: TI EDMA DMA engine driver
> [    3.230547] am335x-phy-driver 47401300.usb-phy: supply vcc not found,
> using dummy regulator
> [    3.239674] am335x-phy-driver 47401300.usb-phy: dummy supplies not
> allowed for exclusive requests
> [    3.255611] am335x-phy-driver 47401b00.usb-phy: supply vcc not found,
> using dummy regulator
> [    3.264906] am335x-phy-driver 47401b00.usb-phy: dummy supplies not
> allowed for exclusive requests
> [    3.288119] musb-hdrc musb-hdrc.1: MUSB HDRC host driver
> [    3.293805] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus
> number 1
> [    3.301785] usb usb1: New USB device found, idVendor=1d6b,
> idProduct=0002, bcdDevice= 6.01
> [    3.310336] usb usb1: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [    3.317791] usb usb1: Product: MUSB HDRC host driver
> [    3.322915] usb usb1: Manufacturer: Linux 6.1.69-ti musb-hcd
> [    3.328755] usb usb1: SerialNumber: musb-hdrc.1
> [    3.334399] hub 1-0:1.0: USB hub found
> [    3.338446] hub 1-0:1.0: 1 port detected
> [    3.364408] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
> [    3.370789] omap-sham 53100000.sham: will run requests pump with
> realtime priority
> [    3.382899] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
> [    3.389523] omap-aes 53500000.aes: will run requests pump with realtime
> priority
> [    3.405436] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5
> counters available
> [    3.419147] l3-aon-clkctrl:0000:0: failed to disable
> [    3.427855] gpio gpiochip3: (gpio-96-127): not an immutable chip, please
> consider fixing it!
> [    3.439204] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 41,
> base_baud = 3000000) is a 8250
> [    3.448493] printk: console [ttyS0] enabled
> [    3.448493] printk: console [ttyS0] enabled
> [    3.457110] printk: bootconsole [omap8250] disabled
> [    3.457110] printk: bootconsole [omap8250] disabled
> [    3.493448] tps65217-pmic: Failed to locate of_node [id: -1]
> [    3.510500] tps65217-bl: Failed to locate of_node [id: -1]
> [    3.520003] tps65217 0-0024: TPS65217 ID 0xe version 1.2
> [    3.527310] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1
> bytes/write
> [    3.534718] i2c 0-0070: Fixed dependency cycle(s) with
> /ocp/interconnect@48000000/segment@300000/target-module@e000/lcdc@0
> /port/endpoint@0
> [    3.667523] tda998x 0-0070: found TDA19988
> [    3.675108] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
> [    3.683307] omap_gpio 44e07000.gpio: Could not set line 6 debounce to
> 200000 microseconds (-22)
> [    3.693654] tilcdc 4830e000.lcdc: bound 0-0070 (ops 0xc11bf9a8)
> [    3.699748] sdhci-omap 48060000.mmc: Got CD GPIO
> [    3.705997] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on
> minor 0
> [    3.713860] sdhci-omap 48060000.mmc: supply pbias not found, using dummy
> regulator
> [    3.723323] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy
> regulator
> [    3.757212] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using
> External DMA
> [    3.828717] mmc0: new high speed SDHC card at address aaaa
> [    3.833620] mmcblk0: mmc0:aaaa SD32G 29.7 GiB
> [    3.837419]  mmcblk0: p1 p2
> [    3.839151] Console: switching to colour frame buffer device 160x64
> [    3.868128] tilcdc 4830e000.lcdc: [drm] fb0: tilcdcdrmfb frame buffer
> device
> [    3.878981] sdhci-omap 481d8000.mmc: supply pbias not found, using dummy
> regulator
> [    3.891295] tps6521x_pwrbutton tps65217-pwrbutton: DMA mask not set
> [    3.899587] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy
> regulator
> [    3.910419] input: tps65217_pwrbutton as
> /devices/platform/ocp/44c00000.interconnect/44c00000.interconnect:segment@200000
> /44e0b000.target-module/44e0b000.i2c/i2c-0/0-0
> [    3.952837] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using
> External DMA
> [    3.961253] VFS: PARTUUID= is invalid.
> [    3.961253] Expected PARTUUID=<valid-uuid-id>[/PARTNROFF=%d]
> [    3.970800] Disabling rootwait; root= is invalid.
> [    3.977324] /dev/root: Can't open blockdev
> [    3.981716] VFS: Cannot open root device "PARTUUID=" or
> unknown-block(0,0): error -6
> [    3.989649] Please append a correct "root=" boot option; here are the
> available partitions:
> [    3.998200] b300        31166976 mmcblk0
> [    3.998216]  driver: mmcblk
> [    4.005313]   b301          131072 mmcblk0p1 076c4a2a-01
> [    4.005328]
> [    4.012322]   b302         2027747 mmcblk0p2 076c4a2a-02
> [    4.012334]
> [    4.019437] Kernel panic - not syncing: VFS: Unable to mount root fs on
> unknown-block(0,0)
> [    4.027753] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.69-ti #1
> [    4.033966] Hardware name: Generic AM33XX (Flattened Device Tree)
> [    4.040101]  unwind_backtrace from show_stack+0x18/0x1c
> [    4.045389]  show_stack from dump_stack_lvl+0x40/0x4c
> [    4.050478]  dump_stack_lvl from panic+0x11c/0x35c
> [    4.055310]  panic from mount_block_root+0x158/0x1f4
> [    4.060314]  mount_block_root from prepare_namespace+0x158/0x194
> [    4.066358]  prepare_namespace from kernel_init_freeable+0x254/0x268
> [    4.072750]  kernel_init_freeable from kernel_init+0x20/0x13c
> [    4.078531]  kernel_init from ret_from_fork+0x14/0x28
> [    4.083614] Exception stack(0xe0009fb0 to 0xe0009ff8)
> [    4.088692] 9fa0:                                     00000000 00000000
> 00000000 00000000
> [    4.096909] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000
> 00000000 00000000
> [    4.105124] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000
> [    4.111788] ---[ end Kernel panic - not syncing: VFS: Unable to mount
> root fs on unknown-block(0,0) ]---


  reply	other threads:[~2024-05-14 20:55 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-05-14 20:24 beagle bone black - scarthgap Joel Winarske
2024-05-14 20:55 ` Denys Dmytriyenko [this message]
2024-05-14 21:14   ` [meta-ti] " Joel Winarske

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240514205531.GI21287@denix.org \
    --to=denis@denix.org \
    --cc=joel.winarske@gmail.com \
    --cc=meta-ti@lists.yoctoproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.