From: Alex Williamson <alex.williamson@redhat.com>
To: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>, <linux-cxl@vger.kernel.org>,
<linux-pci@vger.kernel.org>, <ira.weiny@intel.com>,
<vishal.l.verma@intel.com>, <alison.schofield@intel.com>,
<Jonathan.Cameron@huawei.com>, <dave@stgolabs.net>,
<bhelgaas@google.com>, <lukas@wunner.de>
Subject: Re: [PATCH v6 2/5] PCI: Add locking of upstream bridge for pci_reset_function()
Date: Thu, 23 May 2024 15:38:39 -0600 [thread overview]
Message-ID: <20240523153839.16102e26.alex.williamson@redhat.com> (raw)
In-Reply-To: <664fb286639ed_195e29416@dwillia2-mobl3.amr.corp.intel.com.notmuch>
On Thu, 23 May 2024 14:17:58 -0700
Dan Williams <dan.j.williams@intel.com> wrote:
> Alex Williamson wrote:
> > On Thu, 2 May 2024 09:57:31 -0700
> > Dave Jiang <dave.jiang@intel.com> wrote:
> >
> > > Fix a long standing locking gap for missing pci_cfg_access_lock() while
> > > manipulating bridge reset registers and configuration during
> > > pci_reset_bus_function(). Add calling of pci_dev_lock() against the
> > > bridge device before locking the device. The locking is conditional
> > > depending on whether the trigger device has an upstream bridge. If
> > > the device is a root port then there would be no upstream bridge and
> > > thus the locking of the bridge is unnecessary. As part of calling
> > > pci_dev_lock(), pci_cfg_access_lock() happens and blocks the writing
> > > of PCI config space by user space.
> > >
> > > Add lockdep assertion via pci_dev->cfg_access_lock in order to verify
> > > pci_dev->block_cfg_access is set.
> > >
> > > Co-developed-by: Dan Williams <dan.j.williams@intel.com>
> > > Signed-off-by: Dan Williams <dan.j.williams@intel.com>
> > > Signed-off-by: Dave Jiang <dave.jiang@intel.com>
> > > ---
> [..]
> > > diff --git a/drivers/pci/access.c b/drivers/pci/access.c
> > > index 6449056b57dd..36f10c7f9ef5 100644
> > > --- a/drivers/pci/access.c
> > > +++ b/drivers/pci/access.c
> > > @@ -275,6 +275,8 @@ void pci_cfg_access_lock(struct pci_dev *dev)
> > > {
> > > might_sleep();
> > >
> > > + lock_map_acquire(&dev->cfg_access_lock);
> > > +
> > > raw_spin_lock_irq(&pci_lock);
> > > if (dev->block_cfg_access)
> > > pci_wait_cfg(dev);
> > > @@ -329,6 +331,8 @@ void pci_cfg_access_unlock(struct pci_dev *dev)
> > > raw_spin_unlock_irqrestore(&pci_lock, flags);
> > >
> > > wake_up_all(&pci_cfg_wait);
> > > +
> > > + lock_map_release(&dev->cfg_access_lock);
> >
> >
> > This doesn't account for config access locks acquired via
> > pci_cfg_access_trylock(), such as the pci_dev_trylock() through
> > pci_try_reset_function() resulting in a new lockdep warning for
> > vfio-pci when we try to release a lock that was never acquired.
> > Thanks,
>
> Hey Alex, sorry about that, does this fix it up for you? Note I move the
> lock_map_acquire() relative to the global pci_lock just for symmetry
> purposes.
Thanks, Dan! Yes, this fixes it. Please feel free to add
Reported/Tested-by tags when you post it. Thanks!
Alex
> -- >8 --
> diff --git a/drivers/pci/access.c b/drivers/pci/access.c
> index 30f031de9cfe..3595130ff719 100644
> --- a/drivers/pci/access.c
> +++ b/drivers/pci/access.c
> @@ -289,11 +289,10 @@ void pci_cfg_access_lock(struct pci_dev *dev)
> {
> might_sleep();
>
> - lock_map_acquire(&dev->cfg_access_lock);
> -
> raw_spin_lock_irq(&pci_lock);
> if (dev->block_cfg_access)
> pci_wait_cfg(dev);
> + lock_map_acquire(&dev->cfg_access_lock);
> dev->block_cfg_access = 1;
> raw_spin_unlock_irq(&pci_lock);
> }
> @@ -315,8 +314,10 @@ bool pci_cfg_access_trylock(struct pci_dev *dev)
> raw_spin_lock_irqsave(&pci_lock, flags);
> if (dev->block_cfg_access)
> locked = false;
> - else
> + else {
> + lock_map_acquire(&dev->cfg_access_lock);
> dev->block_cfg_access = 1;
> + }
> raw_spin_unlock_irqrestore(&pci_lock, flags);
>
> return locked;
> @@ -342,11 +343,10 @@ void pci_cfg_access_unlock(struct pci_dev *dev)
> WARN_ON(!dev->block_cfg_access);
>
> dev->block_cfg_access = 0;
> + lock_map_release(&dev->cfg_access_lock);
> raw_spin_unlock_irqrestore(&pci_lock, flags);
>
> wake_up_all(&pci_cfg_wait);
> -
> - lock_map_release(&dev->cfg_access_lock);
> }
> EXPORT_SYMBOL_GPL(pci_cfg_access_unlock);
>
>
next prev parent reply other threads:[~2024-05-23 21:38 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-02 16:57 [PATCH v6 0/5] PCI: Add Secondary Bus Reset (SBR) support for CXL Dave Jiang
2024-05-02 16:57 ` [PATCH v6 1/5] PCI/cxl: Move PCI CXL vendor Id to a common location from CXL subsystem Dave Jiang
2024-05-02 16:57 ` [PATCH v6 2/5] PCI: Add locking of upstream bridge for pci_reset_function() Dave Jiang
2024-05-23 19:10 ` Alex Williamson
2024-05-23 21:17 ` Dan Williams
2024-05-23 21:38 ` Alex Williamson [this message]
2024-05-02 16:57 ` [PATCH v6 3/5] PCI: Add check for CXL Secondary Bus Reset Dave Jiang
2024-05-02 16:57 ` [PATCH v6 4/5] PCI: Create new reset method to force SBR for CXL Dave Jiang
2024-05-02 16:57 ` [PATCH v6 5/5] cxl: Add post reset warning if reset results in loss of previously committed HDM decoders Dave Jiang
2024-05-08 18:27 ` [PATCH v6 0/5] PCI: Add Secondary Bus Reset (SBR) support for CXL Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240523153839.16102e26.alex.williamson@redhat.com \
--to=alex.williamson@redhat.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=alison.schofield@intel.com \
--cc=bhelgaas@google.com \
--cc=dan.j.williams@intel.com \
--cc=dave.jiang@intel.com \
--cc=dave@stgolabs.net \
--cc=ira.weiny@intel.com \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lukas@wunner.de \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.