From: Daniel Borkmann <daniel@iogearbox.net>
To: martin.lau@kernel.org
Cc: razor@blackwall.org, bpf@vger.kernel.org, netdev@vger.kernel.org,
Daniel Borkmann <daniel@iogearbox.net>
Subject: [PATCH bpf v2 2/4] netkit: Fix pkt_type override upon netkit pass verdict
Date: Fri, 24 May 2024 18:36:17 +0200 [thread overview]
Message-ID: <20240524163619.26001-2-daniel@iogearbox.net> (raw)
In-Reply-To: <20240524163619.26001-1-daniel@iogearbox.net>
When running Cilium connectivity test suite with netkit in L2 mode, we
found that compared to tcx a few tests were failing which pushed traffic
into an L7 proxy sitting in host namespace. The problem in particular is
around the invocation of eth_type_trans() in netkit.
In case of tcx, this is run before the tcx ingress is triggered inside
host namespace and thus if the BPF program uses the bpf_skb_change_type()
helper the newly set type is retained. However, in case of netkit, the
late eth_type_trans() invocation overrides the earlier decision from the
BPF program which eventually leads to the test failure.
Instead of eth_type_trans(), split out the relevant parts, meaning, reset
of mac header and call to eth_skb_pkt_type() before the BPF program is run
in order to have the same behavior as with tcx, and refactor a small helper
called eth_skb_pull_mac() which is run in case it's passed up the stack
where the mac header must be pulled. With this all connectivity tests pass.
Fixes: 35dfaad7188c ("netkit, bpf: Add bpf programmable net device")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
---
drivers/net/netkit.c | 4 +++-
include/linux/etherdevice.h | 8 ++++++++
net/ethernet/eth.c | 4 +---
3 files changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/net/netkit.c b/drivers/net/netkit.c
index 272894053e2c..16789cd446e9 100644
--- a/drivers/net/netkit.c
+++ b/drivers/net/netkit.c
@@ -55,6 +55,7 @@ static void netkit_prep_forward(struct sk_buff *skb, bool xnet)
skb_scrub_packet(skb, xnet);
skb->priority = 0;
nf_skip_egress(skb, true);
+ skb_reset_mac_header(skb);
}
static struct netkit *netkit_priv(const struct net_device *dev)
@@ -78,6 +79,7 @@ static netdev_tx_t netkit_xmit(struct sk_buff *skb, struct net_device *dev)
skb_orphan_frags(skb, GFP_ATOMIC)))
goto drop;
netkit_prep_forward(skb, !net_eq(dev_net(dev), dev_net(peer)));
+ eth_skb_pkt_type(skb, peer);
skb->dev = peer;
entry = rcu_dereference(nk->active);
if (entry)
@@ -85,7 +87,7 @@ static netdev_tx_t netkit_xmit(struct sk_buff *skb, struct net_device *dev)
switch (ret) {
case NETKIT_NEXT:
case NETKIT_PASS:
- skb->protocol = eth_type_trans(skb, skb->dev);
+ eth_skb_pull_mac(skb);
skb_postpull_rcsum(skb, eth_hdr(skb), ETH_HLEN);
if (likely(__netif_rx(skb) == NET_RX_SUCCESS)) {
dev_sw_netstats_tx_add(dev, 1, len);
diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h
index 2ad1ffa4ccb9..0ed47d00549b 100644
--- a/include/linux/etherdevice.h
+++ b/include/linux/etherdevice.h
@@ -636,6 +636,14 @@ static inline void eth_skb_pkt_type(struct sk_buff *skb,
}
}
+static inline struct ethhdr *eth_skb_pull_mac(struct sk_buff *skb)
+{
+ struct ethhdr *eth = (struct ethhdr *)skb->data;
+
+ skb_pull_inline(skb, ETH_HLEN);
+ return eth;
+}
+
/**
* eth_skb_pad - Pad buffer to mininum number of octets for Ethernet frame
* @skb: Buffer to pad
diff --git a/net/ethernet/eth.c b/net/ethernet/eth.c
index 049c3adeb850..4e3651101b86 100644
--- a/net/ethernet/eth.c
+++ b/net/ethernet/eth.c
@@ -161,9 +161,7 @@ __be16 eth_type_trans(struct sk_buff *skb, struct net_device *dev)
skb->dev = dev;
skb_reset_mac_header(skb);
- eth = (struct ethhdr *)skb->data;
- skb_pull_inline(skb, ETH_HLEN);
-
+ eth = eth_skb_pull_mac(skb);
eth_skb_pkt_type(skb, dev);
/*
--
2.34.1
next prev parent reply other threads:[~2024-05-24 16:36 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-24 16:36 [PATCH bpf v2 1/4] netkit: Fix setting mac address in l2 mode Daniel Borkmann
2024-05-24 16:36 ` Daniel Borkmann [this message]
2024-05-24 16:36 ` [PATCH bpf v2 3/4] selftests/bpf: Add netkit tests for mac address Daniel Borkmann
2024-05-24 16:36 ` [PATCH bpf v2 4/4] selftests/bpf: Add netkit test for pkt_type Daniel Borkmann
2024-05-24 22:05 ` Martin KaFai Lau
2024-05-25 17:55 ` Alexei Starovoitov
2024-05-26 10:12 ` Daniel Borkmann
2024-05-24 18:23 ` [PATCH bpf v2 1/4] netkit: Fix setting mac address in l2 mode Stanislav Fomichev
2024-05-25 18:00 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240524163619.26001-2-daniel@iogearbox.net \
--to=daniel@iogearbox.net \
--cc=bpf@vger.kernel.org \
--cc=martin.lau@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=razor@blackwall.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.