[PATCH v6 06/10] drm/bridge: sii902x: Switch to use fwnode APIs to acquire device properties

[Sui Jingfeng <sui.jingfeng@linux.dev>]

Make this driver less DT-dependent by calling the freshly created helpers,
also switch to use fwnode APIs to acquire additional device properties.
One side benifit is that boilerplates get reduced, no functional changes
for DT-based systems.

Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
---
 drivers/gpu/drm/bridge/sii902x.c | 43 +++++++++++---------------------
 1 file changed, 15 insertions(+), 28 deletions(-)

diff --git a/drivers/gpu/drm/bridge/sii902x.c b/drivers/gpu/drm/bridge/sii902x.c
index f4808838717a..975511d623a4 100644
--- a/drivers/gpu/drm/bridge/sii902x.c
+++ b/drivers/gpu/drm/bridge/sii902x.c
@@ -827,20 +827,17 @@ static int sii902x_audio_codec_init(struct sii902x *sii902x,
 		.spdif = 0,
 		.max_i2s_channels = 0,
 	};
+	struct fwnode_handle *fwnode = dev_fwnode(dev);
 	u8 lanes[4];
 	int num_lanes, i;
 
-	if (!of_property_read_bool(dev->of_node, "#sound-dai-cells")) {
+	if (!fwnode_property_present(fwnode, "#sound-dai-cells")) {
 		dev_dbg(dev, "%s: No \"#sound-dai-cells\", no audio\n",
 			__func__);
 		return 0;
 	}
 
-	num_lanes = of_property_read_variable_u8_array(dev->of_node,
-						       "sil,i2s-data-lanes",
-						       lanes, 1,
-						       ARRAY_SIZE(lanes));
-
+	num_lanes = fwnode_property_count_u8(fwnode, "sil,i2s-data-lanes");
 	if (num_lanes == -EINVAL) {
 		dev_dbg(dev,
 			"%s: No \"sil,i2s-data-lanes\", use default <0>\n",
@@ -852,7 +849,11 @@ static int sii902x_audio_codec_init(struct sii902x *sii902x,
 			"%s: Error gettin \"sil,i2s-data-lanes\": %d\n",
 			__func__, num_lanes);
 		return num_lanes;
+	} else {
+		fwnode_property_read_u8_array(fwnode, "sil,i2s-data-lanes",
+					      lanes, num_lanes);
 	}
+
 	codec_data.max_i2s_channels = 2 * num_lanes;
 
 	for (i = 0; i < num_lanes; i++)
@@ -1117,7 +1118,6 @@ static int sii902x_init(struct sii902x *sii902x)
 static int sii902x_probe(struct i2c_client *client)
 {
 	struct device *dev = &client->dev;
-	struct device_node *endpoint;
 	struct sii902x *sii902x;
 	static const char * const supplies[] = {"iovcc", "cvcc12"};
 	int ret;
@@ -1146,27 +1146,14 @@ static int sii902x_probe(struct i2c_client *client)
 		return PTR_ERR(sii902x->reset_gpio);
 	}
 
-	endpoint = of_graph_get_endpoint_by_regs(dev->of_node, 1, -1);
-	if (endpoint) {
-		struct device_node *remote = of_graph_get_remote_port_parent(endpoint);
-
-		of_node_put(endpoint);
-		if (!remote) {
-			dev_err(dev, "Endpoint in port@1 unconnected\n");
-			return -ENODEV;
-		}
-
-		if (!of_device_is_available(remote)) {
-			dev_err(dev, "port@1 remote device is disabled\n");
-			of_node_put(remote);
-			return -ENODEV;
-		}
-
-		sii902x->next_bridge = of_drm_find_bridge(remote);
-		of_node_put(remote);
-		if (!sii902x->next_bridge)
-			return dev_err_probe(dev, -EPROBE_DEFER,
-					     "Failed to find remote bridge\n");
+	sii902x->next_bridge = drm_bridge_find_next_bridge_by_fwnode(dev_fwnode(dev), 1);
+	if (!sii902x->next_bridge) {
+		return dev_err_probe(dev, -EPROBE_DEFER,
+				     "Failed to find the next bridge\n");
+	} else if (IS_ERR(sii902x->next_bridge)) {
+		ret = PTR_ERR(sii902x->next_bridge);
+		dev_err(dev, "Error on find the next bridge: %d\n", ret);
+		return ret;
 	}
 
 	mutex_init(&sii902x->mutex);
-- 
2.34.1