[PATCH RFC v2 21/23] rockchip: RV1126: Enable display cpuinfo support on all boards

[Anand Moon <linux.amoon@gmail.com>]

From: Anand Moon <anand@edgeble.ai>

Enable DISPLAY_CPUINFO options to support on all RV1126 boards.
Its used to determine the reset cause of the board.

Cc: Jagan Teki <jagan@edgeble.ai>
Signed-off-by: Anand Moon <anand@edgeble.ai>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
 configs/neu2-io-rv1126_defconfig      | 1 -
 configs/sonoff-ihost-rv1126_defconfig | 1 -
 2 files changed, 2 deletions(-)

diff --git a/configs/neu2-io-rv1126_defconfig b/configs/neu2-io-rv1126_defconfig
index 2a4c9b45a0..0bca5dfffb 100644
--- a/configs/neu2-io-rv1126_defconfig
+++ b/configs/neu2-io-rv1126_defconfig
@@ -16,7 +16,6 @@ CONFIG_DEBUG_UART=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DEFAULT_FDT_FILE="rv1126-edgeble-neu2-io.dtb"
-# CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_PAD_TO=0x7f8000
 CONFIG_SPL_NO_BSS_LIMIT=y
diff --git a/configs/sonoff-ihost-rv1126_defconfig b/configs/sonoff-ihost-rv1126_defconfig
index 4890644c7e..aa77ff3be4 100644
--- a/configs/sonoff-ihost-rv1126_defconfig
+++ b/configs/sonoff-ihost-rv1126_defconfig
@@ -17,7 +17,6 @@ CONFIG_FIT_VERBOSE=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DEFAULT_FDT_FILE="rv1126-sonoff-ihost.dtb"
-# CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_PAD_TO=0x7f8000
 CONFIG_SPL_NO_BSS_LIMIT=y
-- 
2.44.0