[PATCH v4 1/3] dt-bindings: hwmon: g762: Convert to yaml schema

[Christian Marangi <ansuelsmth@gmail.com>]

Convert g762 Documentation to yaml schema and port all the custom
properties and info.

Add the vendor prefix to name to follow naming standard.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
---
Changes v4:
- Fix typo
- Drop fixed clock
- Add Reviewed-by tag
Changes v3:
- Rename yaml to g762 from g76x

 .../devicetree/bindings/hwmon/g762.txt        | 47 ------------
 .../devicetree/bindings/hwmon/gmt,g762.yaml   | 72 +++++++++++++++++++
 2 files changed, 72 insertions(+), 47 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/hwmon/g762.txt
 create mode 100644 Documentation/devicetree/bindings/hwmon/gmt,g762.yaml

diff --git a/Documentation/devicetree/bindings/hwmon/g762.txt b/Documentation/devicetree/bindings/hwmon/g762.txt
deleted file mode 100644
index 6d154c4923de..000000000000
--- a/Documentation/devicetree/bindings/hwmon/g762.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-GMT G762/G763 PWM Fan controller
-
-Required node properties:
-
- - "compatible": must be either "gmt,g762" or "gmt,g763"
- - "reg": I2C bus address of the device
- - "clocks": a fixed clock providing input clock frequency
-	     on CLK pin of the chip.
-
-Optional properties:
-
- - "fan_startv": fan startup voltage. Accepted values are 0, 1, 2 and 3.
-	       The higher the more.
-
- - "pwm_polarity": pwm polarity. Accepted values are 0 (positive duty)
-	       and 1 (negative duty).
-
- - "fan_gear_mode": fan gear mode. Supported values are 0, 1 and 2.
-
-If an optional property is not set in .dts file, then current value is kept
-unmodified (e.g. u-boot installed value).
-
-Additional information on operational parameters for the device is available
-in Documentation/hwmon/g762.rst. A detailed datasheet for the device is available
-at http://natisbad.org/NAS/refs/GMT_EDS-762_763-080710-0.2.pdf.
-
-Example g762 node:
-
-   clocks {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	g762_clk: fixedclk {
-		 compatible = "fixed-clock";
-		 #clock-cells = <0>;
-		 clock-frequency = <8192>;
-	}
-   }
-
-   g762: g762@3e {
-	compatible = "gmt,g762";
-	reg = <0x3e>;
-	clocks = <&g762_clk>
-	fan_gear_mode = <0>; /* chip default */
-	fan_startv = <1>;    /* chip default */
-	pwm_polarity = <0>;  /* chip default */
-   };
diff --git a/Documentation/devicetree/bindings/hwmon/gmt,g762.yaml b/Documentation/devicetree/bindings/hwmon/gmt,g762.yaml
new file mode 100644
index 000000000000..762779da5ba2
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/gmt,g762.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/gmt,g762.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GMT G762/G763 PWM Fan controller
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+
+description: |
+  GMT G762/G763 PWM Fan controller.
+
+  If an optional property is not set in DT, then current value is kept
+  unmodified (e.g. bootloader installed value).
+
+  Additional information on operational parameters for the device is available
+  in Documentation/hwmon/g762.rst. A detailed datasheet for the device is available
+  at http://natisbad.org/NAS/refs/GMT_EDS-762_763-080710-0.2.pdf.
+
+properties:
+  compatible:
+    enum:
+      - gmt,g762
+      - gmt,g763
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: a fixed clock providing input clock frequency on CLK
+      pin of the chip.
+    maxItems: 1
+
+  fan_startv:
+    description: Fan startup voltage step
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+
+  pwm_polarity:
+    description: PWM polarity (positive or negative duty)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  fan_gear_mode:
+    description: FAN gear mode. Configure High speed fan setting factor
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        g762@3e {
+            compatible = "gmt,g762";
+            reg = <0x3e>;
+            clocks = <&g762_clk>;
+            fan_gear_mode = <0>;
+            fan_startv = <1>;
+            pwm_polarity = <0>;
+        };
+    };
-- 
2.43.0