From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Slark Xiao <slark_xiao@163.com>
Cc: loic.poulain@linaro.org, mhi@lists.linux.dev,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] bus: mhi: host: Add Foxconn SDX72 related support
Date: Wed, 5 Jun 2024 11:24:58 +0530 [thread overview]
Message-ID: <20240605055458.GD2417@thinkpad> (raw)
In-Reply-To: <20240520070633.308913-1-slark_xiao@163.com>
On Mon, May 20, 2024 at 03:06:33PM +0800, Slark Xiao wrote:
> Align with Qcom SDX72, add ready timeout item for Foxconn SDX72.
> And also, add firehose support since SDX72.
>
> Signed-off-by: Slark Xiao <slark_xiao@163.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
- Mani
> ---
> v2: (1). Update the edl file path and name (2). Set SDX72 support
> trigger edl mode by default
> ---
> drivers/bus/mhi/host/pci_generic.c | 32 ++++++++++++++++++++++++++++++
> 1 file changed, 32 insertions(+)
>
> diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c
> index 08844ee79654..0b483c7c76a1 100644
> --- a/drivers/bus/mhi/host/pci_generic.c
> +++ b/drivers/bus/mhi/host/pci_generic.c
> @@ -399,6 +399,8 @@ static const struct mhi_channel_config mhi_foxconn_sdx55_channels[] = {
> MHI_CHANNEL_CONFIG_DL(13, "MBIM", 32, 0),
> MHI_CHANNEL_CONFIG_UL(32, "DUN", 32, 0),
> MHI_CHANNEL_CONFIG_DL(33, "DUN", 32, 0),
> + MHI_CHANNEL_CONFIG_UL_FP(34, "FIREHOSE", 32, 0),
> + MHI_CHANNEL_CONFIG_DL_FP(35, "FIREHOSE", 32, 0),
> MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0_MBIM", 128, 2),
> MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0_MBIM", 128, 3),
> };
> @@ -419,6 +421,16 @@ static const struct mhi_controller_config modem_foxconn_sdx55_config = {
> .event_cfg = mhi_foxconn_sdx55_events,
> };
>
> +static const struct mhi_controller_config modem_foxconn_sdx72_config = {
> + .max_channels = 128,
> + .timeout_ms = 20000,
> + .ready_timeout_ms = 50000,
> + .num_channels = ARRAY_SIZE(mhi_foxconn_sdx55_channels),
> + .ch_cfg = mhi_foxconn_sdx55_channels,
> + .num_events = ARRAY_SIZE(mhi_foxconn_sdx55_events),
> + .event_cfg = mhi_foxconn_sdx55_events,
> +};
> +
> static const struct mhi_pci_dev_info mhi_foxconn_sdx24_info = {
> .name = "foxconn-sdx24",
> .config = &modem_foxconn_sdx55_config,
> @@ -448,6 +460,17 @@ static const struct mhi_pci_dev_info mhi_foxconn_sdx65_info = {
> .sideband_wake = false,
> };
>
> +static const struct mhi_pci_dev_info mhi_foxconn_sdx72_info = {
> + .name = "foxconn-sdx72",
> + .edl = "fox/sdx72m/edl.mbn",
> + .edl_trigger = true,
> + .config = &modem_foxconn_sdx72_config,
> + .bar_num = MHI_PCI_DEFAULT_BAR_NUM,
> + .dma_data_width = 32,
> + .mru_default = 32768,
> + .sideband_wake = false,
> +};
> +
> static const struct mhi_channel_config mhi_mv3x_channels[] = {
> MHI_CHANNEL_CONFIG_UL(0, "LOOPBACK", 64, 0),
> MHI_CHANNEL_CONFIG_DL(1, "LOOPBACK", 64, 0),
> @@ -680,6 +703,15 @@ static const struct pci_device_id mhi_pci_id_table[] = {
> /* DW5932e (sdx62), Non-eSIM */
> { PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0f9),
> .driver_data = (kernel_ulong_t) &mhi_foxconn_sdx65_info },
> + /* T99W515 (sdx72) */
> + { PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe118),
> + .driver_data = (kernel_ulong_t) &mhi_foxconn_sdx72_info },
> + /* DW5934e(sdx72), With eSIM */
> + { PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe11d),
> + .driver_data = (kernel_ulong_t) &mhi_foxconn_sdx72_info },
> + /* DW5934e(sdx72), Non-eSIM */
> + { PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe11e),
> + .driver_data = (kernel_ulong_t) &mhi_foxconn_sdx72_info },
> /* MV31-W (Cinterion) */
> { PCI_DEVICE(PCI_VENDOR_ID_THALES, 0x00b3),
> .driver_data = (kernel_ulong_t) &mhi_mv31_info },
> --
> 2.25.1
>
--
மணிவண்ணன் சதாசிவம்
prev parent reply other threads:[~2024-06-05 5:55 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-20 7:06 [PATCH v2] bus: mhi: host: Add Foxconn SDX72 related support Slark Xiao
2024-05-31 7:37 ` Slark Xiao
2024-06-05 5:54 ` Manivannan Sadhasivam [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240605055458.GD2417@thinkpad \
--to=manivannan.sadhasivam@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=loic.poulain@linaro.org \
--cc=mhi@lists.linux.dev \
--cc=slark_xiao@163.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.