[PATCH net-next v4 02/13] dt-bindings: net: dsa: lantiq,gswip: Add missing CPU port phy-mode and fixed-link to example

[Martin Schiller <ms@dev.tdt.de>]

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

The CPU port has to specify a phy-mode and either a phy or a fixed-link.
Since GSWIP is connected using a SoC internal protocol there's no PHY
involved. Add phy-mode = "internal" and a fixed-link to the example code
to describe the communication between the PMAC (Ethernet controller) and
GSWIP switch.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
---
 Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml b/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml
index 14ef48d6a0ee..234ad3b88dfe 100644
--- a/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml
@@ -146,7 +146,13 @@ examples:
 
                     port@6 {
                             reg = <0x6>;
+                            phy-mode = "internal";
                             ethernet = <&eth0>;
+
+                            fixed-link {
+                                    speed = <1000>;
+                                    full-duplex;
+                            };
                     };
             };
 
-- 
2.39.2