From: Lee Jones <lee@kernel.org>
To: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Cc: linux-kernel@vger.kernel.org,
Gregor Herburger <gregor.herburger@tq-group.com>,
linux@ew.tq-group.com
Subject: Re: [PATCH 4/4] mfd: tqmx86: add I2C IRQ support
Date: Thu, 13 Jun 2024 16:42:34 +0100 [thread overview]
Message-ID: <20240613154234.GJ2561462@google.com> (raw)
In-Reply-To: <18d0348f2f7b70329e44f7759bad7e6fe231dba0.1717499766.git.matthias.schiffer@ew.tq-group.com>
On Wed, 05 Jun 2024, Matthias Schiffer wrote:
> From: Gregor Herburger <gregor.herburger@tq-group.com>
>
> The i2c-ocores controller can run in interrupt mode on tqmx86 modules.
> Add module parameter to allow configuring the IRQ number, similar to the
> handling of the GPIO IRQ.
>
> Signed-off-by: Gregor Herburger <gregor.herburger@tq-group.com>
> Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
> ---
> drivers/mfd/tqmx86.c | 20 +++++++++++++++++++-
> 1 file changed, 19 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mfd/tqmx86.c b/drivers/mfd/tqmx86.c
> index cf27497245322..b96af7091b6bc 100644
> --- a/drivers/mfd/tqmx86.c
> +++ b/drivers/mfd/tqmx86.c
> @@ -50,6 +50,7 @@
> #define TQMX86_REG_IO_EXT_INT_9 2
> #define TQMX86_REG_IO_EXT_INT_12 3
> #define TQMX86_REG_IO_EXT_INT_MASK 0x3
> +#define TQMX86_REG_IO_EXT_INT_I2C_SHIFT 0
> #define TQMX86_REG_IO_EXT_INT_GPIO_SHIFT 4
> #define TQMX86_REG_SAUC 0x17
>
> @@ -60,7 +61,12 @@ static uint gpio_irq;
> module_param(gpio_irq, uint, 0);
> MODULE_PARM_DESC(gpio_irq, "GPIO IRQ number (7, 9, 12)");
>
> -static const struct resource tqmx_i2c_soft_resources[] = {
> +static uint i2c_irq;
> +module_param(i2c_irq, uint, 0);
> +MODULE_PARM_DESC(i2c_irq, "I2C IRQ number (7, 9, 12)");
Just one question; what is (7, 9, 12)?
And why is it the same as the GPIO one? Copy/paste error?
> +static struct resource tqmx_i2c_soft_resources[] = {
> + DEFINE_RES_IRQ(0),
> DEFINE_RES_IO(TQMX86_IOBASE_I2C, TQMX86_IOSIZE_I2C),
> };
>
> @@ -271,6 +277,18 @@ static int tqmx86_probe(struct platform_device *pdev)
> ocores_platform_data.clock_khz = tqmx86_board_id_to_clk_rate(dev, board_id);
>
> if (i2c_det == TQMX86_REG_I2C_DETECT_SOFT) {
> + if (i2c_irq) {
> + err = tqmx86_setup_irq(dev, "I2C", i2c_irq, io_base,
> + TQMX86_REG_IO_EXT_INT_I2C_SHIFT);
> + if (err)
> + i2c_irq = 0;
> + }
> +
> + if (i2c_irq)
> + tqmx_i2c_soft_resources[0].start = i2c_irq;
> + else
> + tqmx_i2c_soft_resources[0].flags = 0;
> +
> err = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
> tqmx86_i2c_soft_dev,
> ARRAY_SIZE(tqmx86_i2c_soft_dev),
> --
> TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
> Amtsgericht München, HRB 105018
> Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
> https://www.tq-group.com/
>
--
Lee Jones [李琼斯]
next prev parent reply other threads:[~2024-06-13 15:42 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-05 7:03 [PATCH 0/4] mfd: tqmx86: new hardware and GPIO/I2C IRQ improvements/additions Matthias Schiffer
2024-06-05 7:04 ` [PATCH 1/4] mfd: tqmx86: add board definitions for TQMx120UC, TQMx130UC and TQMxE41S Matthias Schiffer
2024-06-05 7:04 ` [PATCH 2/4] mfd: tqmx86: refactor GPIO IRQ setup Matthias Schiffer
2024-06-05 7:04 ` [PATCH 3/4] mfd: tqmx86: make IRQ setup errors non-fatal Matthias Schiffer
2024-06-05 7:04 ` [PATCH 4/4] mfd: tqmx86: add I2C IRQ support Matthias Schiffer
2024-06-13 15:42 ` Lee Jones [this message]
2024-06-14 9:42 ` Gregor Herburger
2024-06-14 9:49 ` Lee Jones
2024-06-17 7:36 ` Matthias Schiffer
2024-06-17 8:54 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240613154234.GJ2561462@google.com \
--to=lee@kernel.org \
--cc=gregor.herburger@tq-group.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@ew.tq-group.com \
--cc=matthias.schiffer@ew.tq-group.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.