From: Andrew Morton <akpm@linux-foundation.org>
To: mm-commits@vger.kernel.org,vbabka@suse.cz,svens@linux.ibm.com,rostedt@goodmis.org,roman.gushchin@linux.dev,rientjes@google.com,penberg@kernel.org,mhiramat@kernel.org,mark.rutland@arm.com,iamjoonsoo.kim@lge.com,hca@linux.ibm.com,gor@linux.ibm.com,glider@google.com,elver@google.com,dvyukov@google.com,cl@linux.com,borntraeger@linux.ibm.com,agordeev@linux.ibm.com,42.hyeyoo@gmail.com,iii@linux.ibm.com,akpm@linux-foundation.org
Subject: + s390-uaccess-add-kmsan-support-to-put_user-and-get_user.patch added to mm-unstable branch
Date: Thu, 13 Jun 2024 13:31:38 -0700 [thread overview]
Message-ID: <20240613203138.B11C8C4AF1C@smtp.kernel.org> (raw)
The patch titled
Subject: s390/uaccess: add KMSAN support to put_user() and get_user()
has been added to the -mm mm-unstable branch. Its filename is
s390-uaccess-add-kmsan-support-to-put_user-and-get_user.patch
This patch will shortly appear at
https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patches/s390-uaccess-add-kmsan-support-to-put_user-and-get_user.patch
This patch will later appear in the mm-unstable branch at
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/process/submit-checklist.rst when testing your code ***
The -mm tree is included into linux-next via the mm-everything
branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
and is updated there every 2-3 working days
------------------------------------------------------
From: Ilya Leoshkevich <iii@linux.ibm.com>
Subject: s390/uaccess: add KMSAN support to put_user() and get_user()
Date: Thu, 13 Jun 2024 17:34:34 +0200
put_user() uses inline assembly with precise constraints, so Clang is
in principle capable of instrumenting it automatically. Unfortunately,
one of the constraints contains a dereferenced user pointer, and Clang
does not currently distinguish user and kernel pointers. Therefore
KMSAN attempts to access shadow for user pointers, which is not a right
thing to do.
An obvious fix to add __no_sanitize_memory to __put_user_fn() does not
work, since it's __always_inline. And __always_inline cannot be removed
due to the __put_user_bad() trick.
A different obvious fix of using the "a" instead of the "+Q" constraint
degrades the code quality, which is very important here, since it's a
hot path.
Instead, repurpose the __put_user_asm() macro to define
__put_user_{char,short,int,long}_noinstr() functions and mark them with
__no_sanitize_memory. For the non-KMSAN builds make them
__always_inline in order to keep the generated code quality. Also
define __put_user_{char,short,int,long}() functions, which call the
aforementioned ones and which *are* instrumented, because they call
KMSAN hooks, which may be implemented as macros.
The same applies to get_user() as well.
Link: https://lkml.kernel.org/r/20240613153924.961511-33-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/s390/include/asm/uaccess.h | 111 +++++++++++++++++++++---------
1 file changed, 79 insertions(+), 32 deletions(-)
--- a/arch/s390/include/asm/uaccess.h~s390-uaccess-add-kmsan-support-to-put_user-and-get_user
+++ a/arch/s390/include/asm/uaccess.h
@@ -78,13 +78,24 @@ union oac {
int __noreturn __put_user_bad(void);
-#define __put_user_asm(to, from, size) \
-({ \
+#ifdef CONFIG_KMSAN
+#define GET_PUT_USER_NOINSTR_ATTRIBUTES \
+ noinline __maybe_unused __no_sanitize_memory
+#else
+#define GET_PUT_USER_NOINSTR_ATTRIBUTES __always_inline
+#endif
+
+#define DEFINE_PUT_USER(type) \
+static GET_PUT_USER_NOINSTR_ATTRIBUTES int \
+__put_user_##type##_noinstr(unsigned type __user *to, \
+ unsigned type *from, \
+ unsigned long size) \
+{ \
union oac __oac_spec = { \
.oac1.as = PSW_BITS_AS_SECONDARY, \
.oac1.a = 1, \
}; \
- int __rc; \
+ int rc; \
\
asm volatile( \
" lr 0,%[spec]\n" \
@@ -93,12 +104,28 @@ int __noreturn __put_user_bad(void);
"2:\n" \
EX_TABLE_UA_STORE(0b, 2b, %[rc]) \
EX_TABLE_UA_STORE(1b, 2b, %[rc]) \
- : [rc] "=&d" (__rc), [_to] "+Q" (*(to)) \
+ : [rc] "=&d" (rc), [_to] "+Q" (*(to)) \
: [_size] "d" (size), [_from] "Q" (*(from)), \
[spec] "d" (__oac_spec.val) \
: "cc", "0"); \
- __rc; \
-})
+ return rc; \
+} \
+ \
+static __always_inline int \
+__put_user_##type(unsigned type __user *to, unsigned type *from, \
+ unsigned long size) \
+{ \
+ int rc; \
+ \
+ rc = __put_user_##type##_noinstr(to, from, size); \
+ instrument_put_user(*from, to, size); \
+ return rc; \
+}
+
+DEFINE_PUT_USER(char);
+DEFINE_PUT_USER(short);
+DEFINE_PUT_USER(int);
+DEFINE_PUT_USER(long);
static __always_inline int __put_user_fn(void *x, void __user *ptr, unsigned long size)
{
@@ -106,24 +133,24 @@ static __always_inline int __put_user_fn
switch (size) {
case 1:
- rc = __put_user_asm((unsigned char __user *)ptr,
- (unsigned char *)x,
- size);
+ rc = __put_user_char((unsigned char __user *)ptr,
+ (unsigned char *)x,
+ size);
break;
case 2:
- rc = __put_user_asm((unsigned short __user *)ptr,
- (unsigned short *)x,
- size);
+ rc = __put_user_short((unsigned short __user *)ptr,
+ (unsigned short *)x,
+ size);
break;
case 4:
- rc = __put_user_asm((unsigned int __user *)ptr,
+ rc = __put_user_int((unsigned int __user *)ptr,
(unsigned int *)x,
size);
break;
case 8:
- rc = __put_user_asm((unsigned long __user *)ptr,
- (unsigned long *)x,
- size);
+ rc = __put_user_long((unsigned long __user *)ptr,
+ (unsigned long *)x,
+ size);
break;
default:
__put_user_bad();
@@ -134,13 +161,17 @@ static __always_inline int __put_user_fn
int __noreturn __get_user_bad(void);
-#define __get_user_asm(to, from, size) \
-({ \
+#define DEFINE_GET_USER(type) \
+static GET_PUT_USER_NOINSTR_ATTRIBUTES int \
+__get_user_##type##_noinstr(unsigned type *to, \
+ unsigned type __user *from, \
+ unsigned long size) \
+{ \
union oac __oac_spec = { \
.oac2.as = PSW_BITS_AS_SECONDARY, \
.oac2.a = 1, \
}; \
- int __rc; \
+ int rc; \
\
asm volatile( \
" lr 0,%[spec]\n" \
@@ -149,13 +180,29 @@ int __noreturn __get_user_bad(void);
"2:\n" \
EX_TABLE_UA_LOAD_MEM(0b, 2b, %[rc], %[_to], %[_ksize]) \
EX_TABLE_UA_LOAD_MEM(1b, 2b, %[rc], %[_to], %[_ksize]) \
- : [rc] "=&d" (__rc), "=Q" (*(to)) \
+ : [rc] "=&d" (rc), "=Q" (*(to)) \
: [_size] "d" (size), [_from] "Q" (*(from)), \
[spec] "d" (__oac_spec.val), [_to] "a" (to), \
[_ksize] "K" (size) \
: "cc", "0"); \
- __rc; \
-})
+ return rc; \
+} \
+ \
+static __always_inline int \
+__get_user_##type(unsigned type *to, unsigned type __user *from, \
+ unsigned long size) \
+{ \
+ int rc; \
+ \
+ rc = __get_user_##type##_noinstr(to, from, size); \
+ instrument_get_user(*to); \
+ return rc; \
+}
+
+DEFINE_GET_USER(char);
+DEFINE_GET_USER(short);
+DEFINE_GET_USER(int);
+DEFINE_GET_USER(long);
static __always_inline int __get_user_fn(void *x, const void __user *ptr, unsigned long size)
{
@@ -163,24 +210,24 @@ static __always_inline int __get_user_fn
switch (size) {
case 1:
- rc = __get_user_asm((unsigned char *)x,
- (unsigned char __user *)ptr,
- size);
+ rc = __get_user_char((unsigned char *)x,
+ (unsigned char __user *)ptr,
+ size);
break;
case 2:
- rc = __get_user_asm((unsigned short *)x,
- (unsigned short __user *)ptr,
- size);
+ rc = __get_user_short((unsigned short *)x,
+ (unsigned short __user *)ptr,
+ size);
break;
case 4:
- rc = __get_user_asm((unsigned int *)x,
+ rc = __get_user_int((unsigned int *)x,
(unsigned int __user *)ptr,
size);
break;
case 8:
- rc = __get_user_asm((unsigned long *)x,
- (unsigned long __user *)ptr,
- size);
+ rc = __get_user_long((unsigned long *)x,
+ (unsigned long __user *)ptr,
+ size);
break;
default:
__get_user_bad();
_
Patches currently in -mm which might be from iii@linux.ibm.com are
ftrace-unpoison-ftrace_regs-in-ftrace_ops_list_func.patch
kmsan-make-the-tests-compatible-with-kmsanpanic=1.patch
kmsan-disable-kmsan-when-deferred_struct_page_init-is-enabled.patch
kmsan-increase-the-maximum-store-size-to-4096.patch
kmsan-fix-is_bad_asm_addr-on-arches-with-overlapping-address-spaces.patch
kmsan-fix-kmsan_copy_to_user-on-arches-with-overlapping-address-spaces.patch
kmsan-remove-a-useless-assignment-from-kmsan_vmap_pages_range_noflush.patch
kmsan-remove-an-x86-specific-include-from-kmsanh.patch
kmsan-expose-kmsan_get_metadata.patch
kmsan-export-panic_on_kmsan.patch
kmsan-allow-disabling-kmsan-checks-for-the-current-task.patch
kmsan-support-slab_poison.patch
kmsan-use-align_down-in-kmsan_get_metadata.patch
kmsan-do-not-round-up-pg_data_t-size.patch
mm-slub-let-kmsan-access-metadata.patch
mm-slub-unpoison-the-memchr_inv-return-value.patch
mm-kfence-disable-kmsan-when-checking-the-canary.patch
lib-zlib-unpoison-dfltcc-output-buffers.patch
kmsan-accept-ranges-starting-with-0-on-s390.patch
s390-boot-turn-off-kmsan.patch
s390-use-a-larger-stack-for-kmsan.patch
s390-boot-add-the-kmsan-runtime-stub.patch
s390-checksum-add-a-kmsan-check.patch
s390-cpacf-unpoison-the-results-of-cpacf_trng.patch
s390-cpumf-unpoison-stcctm-output-buffer.patch
s390-diag-unpoison-diag224-output-buffer.patch
s390-ftrace-unpoison-ftrace_regs-in-kprobe_ftrace_handler.patch
s390-irqflags-do-not-instrument-arch_local_irq_-with-kmsan.patch
s390-mm-define-kmsan-metadata-for-vmalloc-and-modules.patch
s390-string-add-kmsan-support.patch
s390-traps-unpoison-the-kernel_stack_overflows-pt_regs.patch
s390-uaccess-add-kmsan-support-to-put_user-and-get_user.patch
s390-unwind-disable-kmsan-checks.patch
s390-implement-the-architecture-specific-kmsan-functions.patch
kmsan-enable-on-s390.patch
next reply other threads:[~2024-06-13 20:31 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-13 20:31 Andrew Morton [this message]
-- strict thread matches above, loose matches on Subject: below --
2024-06-20 0:59 + s390-uaccess-add-kmsan-support-to-put_user-and-get_user.patch added to mm-unstable branch Andrew Morton
2023-12-14 22:44 Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240613203138.B11C8C4AF1C@smtp.kernel.org \
--to=akpm@linux-foundation.org \
--cc=42.hyeyoo@gmail.com \
--cc=agordeev@linux.ibm.com \
--cc=borntraeger@linux.ibm.com \
--cc=cl@linux.com \
--cc=dvyukov@google.com \
--cc=elver@google.com \
--cc=glider@google.com \
--cc=gor@linux.ibm.com \
--cc=hca@linux.ibm.com \
--cc=iamjoonsoo.kim@lge.com \
--cc=iii@linux.ibm.com \
--cc=mark.rutland@arm.com \
--cc=mhiramat@kernel.org \
--cc=mm-commits@vger.kernel.org \
--cc=penberg@kernel.org \
--cc=rientjes@google.com \
--cc=roman.gushchin@linux.dev \
--cc=rostedt@goodmis.org \
--cc=svens@linux.ibm.com \
--cc=vbabka@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.