All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Hans de Goede <hdegoede@redhat.com>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Sasha Levin <sashal@kernel.org>,
	linux-input@vger.kernel.org, platform-driver-x86@vger.kernel.org
Subject: [PATCH AUTOSEL 6.6 26/35] Input: silead - Always support 10 fingers
Date: Mon, 17 Jun 2024 09:22:24 -0400	[thread overview]
Message-ID: <20240617132309.2588101-26-sashal@kernel.org> (raw)
In-Reply-To: <20240617132309.2588101-1-sashal@kernel.org>

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 38a38f5a36da9820680d413972cb733349400532 ]

When support for Silead touchscreens was orginal added some touchscreens
with older firmware versions only supported 5 fingers and this was made
the default requiring the setting of a "silead,max-fingers=10" uint32
device-property for all touchscreen models which do support 10 fingers.

There are very few models with the old 5 finger fw, so in practice the
setting of the "silead,max-fingers=10" is boilerplate which needs to
be copy and pasted to every touchscreen config.

Reporting that 10 fingers are supported on devices which only support
5 fingers doesn't cause any problems for userspace in practice, since
at max 4 finger gestures are supported anyways. Drop the max_fingers
configuration and simply always assume 10 fingers.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20240525193854.39130-2-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/touchscreen/silead.c | 19 +++++--------------
 1 file changed, 5 insertions(+), 14 deletions(-)

diff --git a/drivers/input/touchscreen/silead.c b/drivers/input/touchscreen/silead.c
index 62f562ad50263..050fa9ca4ec94 100644
--- a/drivers/input/touchscreen/silead.c
+++ b/drivers/input/touchscreen/silead.c
@@ -71,7 +71,6 @@ struct silead_ts_data {
 	struct regulator_bulk_data regulators[2];
 	char fw_name[64];
 	struct touchscreen_properties prop;
-	u32 max_fingers;
 	u32 chip_id;
 	struct input_mt_pos pos[SILEAD_MAX_FINGERS];
 	int slots[SILEAD_MAX_FINGERS];
@@ -136,7 +135,7 @@ static int silead_ts_request_input_dev(struct silead_ts_data *data)
 	touchscreen_parse_properties(data->input, true, &data->prop);
 	silead_apply_efi_fw_min_max(data);
 
-	input_mt_init_slots(data->input, data->max_fingers,
+	input_mt_init_slots(data->input, SILEAD_MAX_FINGERS,
 			    INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED |
 			    INPUT_MT_TRACK);
 
@@ -256,10 +255,10 @@ static void silead_ts_read_data(struct i2c_client *client)
 		return;
 	}
 
-	if (buf[0] > data->max_fingers) {
+	if (buf[0] > SILEAD_MAX_FINGERS) {
 		dev_warn(dev, "More touches reported then supported %d > %d\n",
-			 buf[0], data->max_fingers);
-		buf[0] = data->max_fingers;
+			 buf[0], SILEAD_MAX_FINGERS);
+		buf[0] = SILEAD_MAX_FINGERS;
 	}
 
 	if (silead_ts_handle_pen_data(data, buf))
@@ -315,7 +314,6 @@ static void silead_ts_read_data(struct i2c_client *client)
 
 static int silead_ts_init(struct i2c_client *client)
 {
-	struct silead_ts_data *data = i2c_get_clientdata(client);
 	int error;
 
 	error = i2c_smbus_write_byte_data(client, SILEAD_REG_RESET,
@@ -325,7 +323,7 @@ static int silead_ts_init(struct i2c_client *client)
 	usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX);
 
 	error = i2c_smbus_write_byte_data(client, SILEAD_REG_TOUCH_NR,
-					data->max_fingers);
+					  SILEAD_MAX_FINGERS);
 	if (error)
 		goto i2c_write_err;
 	usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX);
@@ -591,13 +589,6 @@ static void silead_ts_read_props(struct i2c_client *client)
 	const char *str;
 	int error;
 
-	error = device_property_read_u32(dev, "silead,max-fingers",
-					 &data->max_fingers);
-	if (error) {
-		dev_dbg(dev, "Max fingers read error %d\n", error);
-		data->max_fingers = 5; /* Most devices handle up-to 5 fingers */
-	}
-
 	error = device_property_read_string(dev, "firmware-name", &str);
 	if (!error)
 		snprintf(data->fw_name, sizeof(data->fw_name),
-- 
2.43.0


  parent reply	other threads:[~2024-06-17 13:24 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-06-17 13:21 [PATCH AUTOSEL 6.6 01/35] scsi: core: alua: I/O errors for ALUA state transitions Sasha Levin
2024-06-17 13:22 ` [PATCH AUTOSEL 6.6 02/35] scsi: sr: Fix unintentional arithmetic wraparound Sasha Levin
2024-06-17 13:22 ` [PATCH AUTOSEL 6.6 03/35] scsi: qedf: Don't process stag work during unload and recovery Sasha Levin
2024-06-17 13:22 ` [PATCH AUTOSEL 6.6 04/35] scsi: qedf: Wait for stag work during unload Sasha Levin
2024-06-17 13:22 ` [PATCH AUTOSEL 6.6 05/35] scsi: qedf: Set qed_slowpath_params to zero before use Sasha Levin
2024-06-17 13:22 ` [PATCH AUTOSEL 6.6 06/35] efi/libstub: zboot.lds: Discard .discard sections Sasha Levin
2024-06-17 13:22 ` [PATCH AUTOSEL 6.6 07/35] efi: pstore: Return proper errors on UEFI failures Sasha Levin
2024-06-17 13:24   ` Ard Biesheuvel
2024-06-17 13:22 ` [PATCH AUTOSEL 6.6 08/35] ACPI: EC: Abort address space access upon error Sasha Levin
2024-06-17 13:22 ` [PATCH AUTOSEL 6.6 09/35] ACPI: EC: Avoid returning AE_OK on errors in address space handler Sasha Levin
2024-06-17 13:22 ` [PATCH AUTOSEL 6.6 10/35] tools/power/cpupower: Fix Pstate frequency reporting on AMD Family 1Ah CPUs Sasha Levin
2024-06-17 13:22 ` [PATCH AUTOSEL 6.6 11/35] wifi: mac80211: mesh: init nonpeer_pm to active by default in mesh sdata Sasha Levin
2024-06-17 13:22 ` [PATCH AUTOSEL 6.6 12/35] wifi: mac80211: apply mcast rate only if interface is up Sasha Levin
2024-06-17 13:22 ` [PATCH AUTOSEL 6.6 13/35] wifi: mac80211: handle tasklet frames before stopping Sasha Levin
2024-06-17 13:22 ` [PATCH AUTOSEL 6.6 14/35] wifi: cfg80211: fix 6 GHz scan request building Sasha Levin
2024-06-17 13:22 ` [PATCH AUTOSEL 6.6 15/35] wifi: iwlwifi: mvm: d3: fix WoWLAN command version lookup Sasha Levin
2024-06-17 13:22 ` [PATCH AUTOSEL 6.6 16/35] wifi: iwlwifi: mvm: remove stale STA link data during restart Sasha Levin
2024-06-17 13:22 ` [PATCH AUTOSEL 6.6 17/35] wifi: iwlwifi: mvm: Handle BIGTK cipher in kek_kck cmd Sasha Levin
2024-06-17 13:22 ` [PATCH AUTOSEL 6.6 18/35] wifi: iwlwifi: mvm: handle BA session teardown in RF-kill Sasha Levin
2024-06-17 13:22 ` [PATCH AUTOSEL 6.6 19/35] wifi: iwlwifi: mvm: properly set 6 GHz channel direct probe option Sasha Levin
2024-06-17 13:22 ` [PATCH AUTOSEL 6.6 20/35] wifi: iwlwifi: mvm: Fix scan abort handling with HW rfkill Sasha Levin
2024-06-17 13:22 ` [PATCH AUTOSEL 6.6 21/35] wifi: mac80211: fix UBSAN noise in ieee80211_prep_hw_scan() Sasha Levin
2024-06-17 13:22 ` [PATCH AUTOSEL 6.6 22/35] selftests: cachestat: Fix build warnings on ppc64 Sasha Levin
2024-06-17 13:22 ` [PATCH AUTOSEL 6.6 23/35] selftests/openat2: " Sasha Levin
2024-06-17 13:22 ` [PATCH AUTOSEL 6.6 24/35] selftests/futex: pass _GNU_SOURCE without a value to the compiler Sasha Levin
2024-06-17 13:22 ` [PATCH AUTOSEL 6.6 25/35] of/irq: Factor out parsing of interrupt-map parent phandle+args from of_irq_parse_raw() Sasha Levin
2024-06-17 13:22 ` Sasha Levin [this message]
2024-06-17 13:22 ` [PATCH AUTOSEL 6.6 27/35] net: ipv6: rpl_iptunnel: block BH in rpl_output() and rpl_input() Sasha Levin
2024-06-17 13:22 ` [PATCH AUTOSEL 6.6 28/35] ila: block BH in ila_output() Sasha Levin
2024-06-17 13:22 ` [PATCH AUTOSEL 6.6 29/35] arm64: armv8_deprecated: Fix warning in isndep cpuhp starting process Sasha Levin
2024-06-17 13:22 ` [PATCH AUTOSEL 6.6 30/35] null_blk: fix validation of block size Sasha Levin
2024-06-17 13:22 ` [PATCH AUTOSEL 6.6 31/35] kconfig: gconf: give a proper initial state to the Save button Sasha Levin
2024-06-17 13:22 ` [PATCH AUTOSEL 6.6 32/35] kconfig: remove wrong expr_trans_bool() Sasha Levin
2024-06-17 13:22 ` [PATCH AUTOSEL 6.6 33/35] input: Add event code for accessibility key Sasha Levin
2024-06-17 13:22 ` [PATCH AUTOSEL 6.6 34/35] input: Add support for "Do Not Disturb" Sasha Levin
2024-06-17 13:22 ` [PATCH AUTOSEL 6.6 35/35] HID: Ignore battery for ELAN touchscreens 2F2C and 4116 Sasha Levin
  -- strict thread matches above, loose matches on Subject: below --
2024-06-18 12:37 [PATCH AUTOSEL 6.6 01/35] scsi: core: alua: I/O errors for ALUA state transitions Sasha Levin
2024-06-18 12:37 ` [PATCH AUTOSEL 6.6 26/35] Input: silead - Always support 10 fingers Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240617132309.2588101-26-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=hdegoede@redhat.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.