From: Conor Dooley <conor@kernel.org>
To: Prabhakar <prabhakar.csengg@gmail.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>,
Wolfram Sang <wsa+renesas@sang-engineering.com>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Magnus Damm <magnus.damm@gmail.com>,
linux-mmc@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
Biju Das <biju.das.jz@bp.renesas.com>,
Fabrizio Castro <fabrizio.castro.jz@renesas.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: Re: [PATCH v3 1/3] dt-bindings: mmc: renesas,sdhi: Document RZ/V2H(P) support
Date: Mon, 24 Jun 2024 17:39:09 +0100 [thread overview]
Message-ID: <20240624-request-demeanor-d66965d27935@spud> (raw)
In-Reply-To: <20240624153229.68882-2-prabhakar.mahadev-lad.rj@bp.renesas.com>
[-- Attachment #1: Type: text/plain, Size: 3532 bytes --]
On Mon, Jun 24, 2024 at 04:32:27PM +0100, Prabhakar wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
>
> The SD/MMC block on the RZ/V2H(P) ("R9A09G057") SoC is similar to that
> of the R-Car Gen3, but it has some differences:
> - HS400 is not supported.
> - It supports the SD_IOVS bit to control the IO voltage level.
> - It supports fixed address mode.
>
> To accommodate these differences, a SoC-specific 'renesas,sdhi-r9a09g057'
> compatible string is added.
>
> A 'vqmmc-regulator' object is introduced to handle the power enable (PWEN)
> and voltage level switching for the SD/MMC.
>
> Additionally, the 'renesas,sdhi-use-internal-regulator' flag is introduced
> to indicate that an internal regulator is used instead of a
> GPIO-controlled regulator. This flag will help configure the internal
> regulator and avoid special handling when GPIO is used for voltage
> regulation instead of the SD_(IOVS/PWEN) pins.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> v2->v3
> - Renamed vqmmc-r9a09g057-regulator object to vqmmc-regulator
> - Added regulator-compatible property for vqmmc-regulator
> - Added 'renesas,sdhi-use-internal-regulator' property
>
> v1->v2
> - Moved vqmmc object in the if block
> - Updated commit message
> ---
> .../devicetree/bindings/mmc/renesas,sdhi.yaml | 30 ++++++++++++++++++-
> 1 file changed, 29 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
> index 3d0e61e59856..20769434a422 100644
> --- a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
> +++ b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
> @@ -18,6 +18,7 @@ properties:
> - renesas,sdhi-r7s9210 # SH-Mobile AG5
> - renesas,sdhi-r8a73a4 # R-Mobile APE6
> - renesas,sdhi-r8a7740 # R-Mobile A1
> + - renesas,sdhi-r9a09g057 # RZ/V2H(P)
> - renesas,sdhi-sh73a0 # R-Mobile APE6
> - items:
> - enum:
> @@ -118,7 +119,9 @@ allOf:
> properties:
> compatible:
> contains:
> - const: renesas,rzg2l-sdhi
> + enum:
> + - renesas,sdhi-r9a09g057
> + - renesas,rzg2l-sdhi
> then:
> properties:
> clocks:
> @@ -204,6 +207,31 @@ allOf:
> sectioned off to be run by a separate second clock source to allow
> the main core clock to be turned off to save power.
>
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: renesas,sdhi-r9a09g057
> + then:
> + properties:
Please define properties at the top level and constrain then per
compatible.
Thanks,
Conor.
> + renesas,sdhi-use-internal-regulator:
> + $ref: /schemas/types.yaml#/definitions/flag
> + description:
> + Flag to indicate internal regulator is being used instead of GPIO regulator.
> +
> + vqmmc-regulator:
> + type: object
> + description: VQMMC SD regulator
> + $ref: /schemas/regulator/regulator.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + regulator-compatible:
> + pattern: "^vqmmc-r9a09g057-regulator"
> +
> + required:
> + - vqmmc-regulator
> +
> required:
> - compatible
> - reg
> --
> 2.34.1
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
next prev parent reply other threads:[~2024-06-24 16:39 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-24 15:32 [PATCH v3 0/3] Add SD/MMC support for Renesas RZ/V2H(P) SoC Prabhakar
2024-06-24 15:32 ` [PATCH v3 1/3] dt-bindings: mmc: renesas,sdhi: Document RZ/V2H(P) support Prabhakar
2024-06-24 16:39 ` Conor Dooley [this message]
2024-06-24 17:26 ` Lad, Prabhakar
2024-06-25 6:57 ` Geert Uytterhoeven
2024-06-25 8:46 ` Lad, Prabhakar
2024-06-25 9:02 ` Geert Uytterhoeven
2024-06-25 9:07 ` Lad, Prabhakar
2024-06-25 9:12 ` Biju Das
2024-06-25 9:19 ` Lad, Prabhakar
2024-06-25 9:47 ` Biju Das
2024-06-25 10:35 ` Lad, Prabhakar
2024-06-24 15:32 ` [PATCH v3 2/3] mmc: tmio: Use MMC core APIs to control the vqmmc regulator Prabhakar
2024-06-26 7:45 ` claudiu beznea
2024-06-24 15:32 ` [PATCH v3 3/3] mmc: renesas_sdhi: Add support for RZ/V2H(P) SoC Prabhakar
2024-06-26 7:49 ` claudiu beznea
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240624-request-demeanor-d66965d27935@spud \
--to=conor@kernel.org \
--cc=biju.das.jz@bp.renesas.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=fabrizio.castro.jz@renesas.com \
--cc=geert+renesas@glider.be \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=prabhakar.csengg@gmail.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=robh@kernel.org \
--cc=ulf.hansson@linaro.org \
--cc=wsa+renesas@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.