From: Spencer Hill <shill@d3engineering.com>
To: Mauro Carvalho Chehab <mchehab@kernel.org>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Spencer Hill <shill@d3engineering.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
Dave Stevenson <dave.stevenson@raspberrypi.com>,
Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: linux-kernel@vger.kernel.org, linux-media@vger.kernel.org,
devicetree@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/2] media: dt-bindings: Add Sony IMX728
Date: Fri, 28 Jun 2024 17:17:00 -0400 [thread overview]
Message-ID: <20240628-imx728-driver-v2-1-80efa6774286@d3engineering.com> (raw)
In-Reply-To: <20240628-imx728-driver-v2-0-80efa6774286@d3engineering.com>
Add bindings for Sony IMX728.
Signed-off-by: Spencer Hill <shill@d3engineering.com>
---
.../devicetree/bindings/media/i2c/sony,imx728.yaml | 119 +++++++++++++++++++++
MAINTAINERS | 7 ++
2 files changed, 126 insertions(+)
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx728.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx728.yaml
new file mode 100644
index 000000000000..1b14dbcc473a
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx728.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx728.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX728 Camera Sensor
+
+maintainers:
+ - Spencer Hill <shill@d3engineering.com>
+
+description:
+ The Sony IMX728 is a 1/1.72-Inch CMOS Solid-state image sensor with a
+ color square pixel array and 8.39M active pixels. It is programmed
+ through an I2C interface.
+
+ The sensor can output up to 3840x2160 at a maximum of 45 frames/s over
+ a CSI-2 serial interface. It supports RAW24/20/16/12 and 10.
+
+properties:
+ compatible:
+ enum:
+ - sony,imx728
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ description: Clock frequency from 18 to 30MHz
+ maxItems: 1
+
+ clock-names:
+ const: inck
+
+ reset-gpios:
+ maxItems: 1
+ description:
+ Specifier for the GPIO connected to the XCLR (System Reset) pin.
+
+ avdd-supply:
+ description: Analog power supply (3.3V)
+
+ dvdd-supply:
+ description: Digital core power supply (1.1V)
+
+ ovdd-supply:
+ description: Digital I/O power supply (1.8V)
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ additionalProperties: false
+
+ properties:
+ endpoint:
+ $ref: ../video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ oneOf:
+ - items:
+ - const: 1
+ - const: 2
+ - items:
+ - const: 1
+ - const: 2
+ - const: 3
+ - const: 4
+ link-frequencies: true
+
+ required:
+ - data-lanes
+ - link-frequencies
+
+ required:
+ - endpoint
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ camera@1a {
+ compatible = "sony,imx728";
+ reg = <0x1a>;
+
+ clocks = <&fixed_clock>;
+ clock-names = "inck";
+
+ reset-gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
+
+ avdd-supply = <&camera_vdda_3v3>;
+ dvdd-supply = <&camera_vddd_1v1>;
+ ovdd-supply = <&camera_vddo_1v8>;
+
+ port {
+ camera1: endpoint {
+ remote-endpoint = <&csi2_phy0>;
+ data-lanes = <1 2 3 4>;
+ link-frequencies = /bits/ 64 <800000000>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index ef6be9d95143..a2811249ac8c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20589,6 +20589,13 @@ T: git git://linuxtv.org/media_tree.git
F: Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml
F: drivers/media/i2c/imx415.c
+SONY IMX728 SENSOR DRIVER
+M: Spencer Hill <shill@d3engineering.com>
+L: linux-media@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/media/i2c/sony,imx728.yaml
+F: drivers/media/i2c/imx728.c
+
SONY MEMORYSTICK SUBSYSTEM
M: Maxim Levitsky <maximlevitsky@gmail.com>
M: Alex Dubov <oakad@yahoo.com>
--
2.43.0
Please be aware that this email includes email addresses outside of the organization.
next prev parent reply other threads:[~2024-06-28 21:17 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-28 21:16 [PATCH v2 0/2] media: i2c: Add driver for Sony IMX728 Spencer Hill
2024-06-28 21:17 ` Spencer Hill [this message]
2024-07-01 9:36 ` [PATCH v2 1/2] media: dt-bindings: Add " Krzysztof Kozlowski
2024-07-02 6:56 ` Krzysztof Kozlowski
2024-07-01 19:28 ` Rob Herring (Arm)
2024-06-28 21:17 ` [PATCH v2 2/2] media: i2c: Add driver for " Spencer Hill
2024-06-29 20:51 ` Kieran Bingham
2024-06-30 6:15 ` Markus Elfring
2024-07-01 9:25 ` Alexander Stein
2024-07-01 14:00 ` Dave Stevenson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240628-imx728-driver-v2-1-80efa6774286@d3engineering.com \
--to=shill@d3engineering.com \
--cc=alexander.stein@ew.tq-group.com \
--cc=conor+dt@kernel.org \
--cc=dave.stevenson@raspberrypi.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=sakari.ailus@linux.intel.com \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.