[PATCH v1 2/8] PCI: brcmstb: Use "clk_out" error path label

[Jim Quinlan <james.quinlan@broadcom.com>]

[-- Attachment #1: Type: text/plain, Size: 1600 bytes --]

Instead of invoking "clk_disable_unprepare(pcie->clk)" in
a number of error paths.

Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
---
 drivers/pci/controller/pcie-brcmstb.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index c08683febdd4..c2eb29b886f7 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -1620,24 +1620,25 @@ static int brcm_pcie_probe(struct platform_device *pdev)
 	}
 	pcie->rescal = devm_reset_control_get_optional_shared(&pdev->dev, "rescal");
 	if (IS_ERR(pcie->rescal)) {
-		clk_disable_unprepare(pcie->clk);
-		return PTR_ERR(pcie->rescal);
+		ret = PTR_ERR(pcie->rescal);
+		goto clk_out;
 	}
 	pcie->perst_reset = devm_reset_control_get_optional_exclusive(&pdev->dev, "perst");
 	if (IS_ERR(pcie->perst_reset)) {
-		clk_disable_unprepare(pcie->clk);
-		return PTR_ERR(pcie->perst_reset);
+		ret = PTR_ERR(pcie->perst_reset);
+		goto clk_out;
 	}
 
 	ret = reset_control_reset(pcie->rescal);
-	if (ret)
+	if (ret) {
 		dev_err(&pdev->dev, "failed to deassert 'rescal'\n");
+		goto clk_out;
+	}
 
 	ret = brcm_phy_start(pcie);
 	if (ret) {
 		reset_control_rearm(pcie->rescal);
-		clk_disable_unprepare(pcie->clk);
-		return ret;
+		goto clk_out;
 	}
 
 	ret = brcm_pcie_setup(pcie);
@@ -1676,6 +1677,9 @@ static int brcm_pcie_probe(struct platform_device *pdev)
 
 	return 0;
 
+clk_out:
+	clk_disable_unprepare(pcie->clk);
+	return ret;
 fail:
 	__brcm_pcie_remove(pcie);
 	return ret;
-- 
2.17.1


[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4210 bytes --]