From: Raymond Hackley <raymondhackley@protonmail.com>
To: linux-kernel@vger.kernel.org
Cc: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
phone-devel@vger.kernel.org,
~postmarketos/upstreaming@lists.sr.ht,
Luca Weiss <luca@lucaweiss.eu>
Subject: [PATCH v3 2/2] ARM: dts: qcom-msm8226-samsung-ms013g: Add initial device tree
Date: Sun, 30 Jun 2024 13:29:41 +0000 [thread overview]
Message-ID: <20240630132859.2885-3-raymondhackley@protonmail.com> (raw)
In-Reply-To: <20240630132859.2885-1-raymondhackley@protonmail.com>
Samsung Galaxy Grand 2 is a phone based on MSM8226. It's similar to the
other Samsung devices based on MSM8226 with only a few minor differences.
The device trees contain initial support with:
- GPIO keys
- Regulator haptic
- SDHCI (internal and external storage)
- UART (on USB connector via the TI TSU6721 MUIC)
- Regulators
- Touchscreen
- Accelerometer
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Reviewed-by: Luca Weiss <luca@lucaweiss.eu>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
arch/arm/boot/dts/qcom/Makefile | 1 +
.../dts/qcom/qcom-msm8226-samsung-ms013g.dts | 386 ++++++++++++++++++
2 files changed, 387 insertions(+)
create mode 100644 arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts
diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile
index ccd4ce6353df..f06c6d425e91 100644
--- a/arch/arm/boot/dts/qcom/Makefile
+++ b/arch/arm/boot/dts/qcom/Makefile
@@ -28,6 +28,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-msm8226-microsoft-dempsey.dtb \
qcom-msm8226-microsoft-makepeace.dtb \
qcom-msm8226-microsoft-moneypenny.dtb \
+ qcom-msm8226-samsung-ms013g.dtb \
qcom-msm8226-samsung-s3ve3g.dtb \
qcom-msm8660-surf.dtb \
qcom-msm8916-samsung-e5.dtb \
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts
new file mode 100644
index 000000000000..2ecc5983d365
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts
@@ -0,0 +1,386 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+
+/delete-node/ &smem_region;
+
+/ {
+ model = "Samsung Galaxy Grand 2";
+ compatible = "samsung,ms013g", "qcom,msm8226";
+ chassis-type = "handset";
+
+ aliases {
+ mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+ mmc1 = &sdhc_2; /* SDC2 SD card slot */
+ serial0 = &blsp1_uart3;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-hall-sensor {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&gpio_hall_sensor_default>;
+ pinctrl-names = "default";
+
+ label = "GPIO Hall Effect Sensor";
+
+ event-hall-sensor {
+ label = "Hall Effect Sensor";
+ gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LID>;
+ linux,can-disable;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&gpio_keys_default>;
+ pinctrl-names = "default";
+
+ label = "GPIO Buttons";
+
+ button-volume-up {
+ label = "Volume Up";
+ gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+
+ button-volume-down {
+ label = "Volume Down";
+ gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+
+ button-home {
+ label = "Home Key";
+ gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOMEPAGE>;
+ };
+ };
+
+ reg_motor_vdd: regulator-motor-vdd {
+ compatible = "regulator-fixed";
+ regulator-name = "motor_vdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 111 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&motor_en_default>;
+ pinctrl-names = "default";
+ };
+
+ reg_vdd_tsp_a: regulator-vdd-tsp-a {
+ compatible = "regulator-fixed";
+ regulator-name = "tsp_3p3v";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&tsp_en_default>;
+ pinctrl-names = "default";
+ };
+
+ reserved-memory {
+ smem_region: smem@fa00000 {
+ reg = <0x0fa00000 0x100000>;
+ no-map;
+ };
+ };
+
+ vibrator {
+ compatible = "regulator-haptic";
+ haptic-supply = <®_motor_vdd>;
+ min-microvolt = <3300000>;
+ max-microvolt = <3300000>;
+ };
+};
+
+&blsp1_i2c2 {
+ status = "okay";
+
+ accelerometer@18 {
+ compatible = "bosch,bma255";
+ reg = <0x18>;
+ interrupts-extended = <&tlmm 64 IRQ_TYPE_EDGE_RISING>;
+
+ vdd-supply = <&pm8226_l19>;
+ vddio-supply = <&pm8226_lvs1>;
+
+ pinctrl-0 = <&accel_int_default>;
+ pinctrl-names = "default";
+
+ mount-matrix = "0", "1", "0",
+ "-1", "0", "0",
+ "0", "0", "-1";
+ };
+};
+
+&blsp1_i2c5 {
+ status = "okay";
+
+ touchscreen@20 {
+ compatible = "zinitix,bt541";
+
+ reg = <0x20>;
+ interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+
+ touchscreen-size-x = <720>;
+ touchscreen-size-y = <1280>;
+
+ vcca-supply = <®_vdd_tsp_a>;
+ vdd-supply = <&pm8226_lvs1>;
+
+ pinctrl-0 = <&tsp_int_default>;
+ pinctrl-names = "default";
+ };
+};
+
+&blsp1_uart3 {
+ status = "okay";
+};
+
+&rpm_requests {
+ regulators {
+ compatible = "qcom,rpm-pm8226-regulators";
+
+ pm8226_s3: s3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ pm8226_s4: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2200000>;
+ };
+
+ pm8226_s5: s5 {
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ };
+
+ pm8226_l1: l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8226_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8226_l3: l3 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1337500>;
+ };
+
+ pm8226_l4: l4 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8226_l5: l5 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8226_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-allow-set-load;
+ regulator-always-on;
+ };
+
+ pm8226_l7: l7 {
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <1850000>;
+ };
+
+ pm8226_l8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l9: l9 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8226_l10: l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l14: l14 {
+ regulator-min-microvolt = <2750000>;
+ regulator-max-microvolt = <2750000>;
+ };
+
+ pm8226_l15: l15 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ pm8226_l16: l16 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3350000>;
+ };
+
+ pm8226_l17: l17 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+
+ regulator-system-load = <200000>;
+ regulator-allow-set-load;
+ regulator-always-on;
+ };
+
+ pm8226_l18: l18 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l19: l19 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pm8226_l20: l20 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+
+ pm8226_l21: l21 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-allow-set-load;
+ };
+
+ pm8226_l22: l22 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l23: l23 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8226_l24: l24 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1350000>;
+ };
+
+ pm8226_l25: l25 {
+ regulator-min-microvolt = <1775000>;
+ regulator-max-microvolt = <2125000>;
+ };
+
+ pm8226_l26: l26 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ pm8226_l27: l27 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8226_l28: l28 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_lvs1: lvs1 {};
+ };
+};
+
+&sdhc_1 {
+ vmmc-supply = <&pm8226_l17>;
+ vqmmc-supply = <&pm8226_l6>;
+
+ bus-width = <8>;
+ non-removable;
+
+ status = "okay";
+};
+
+&sdhc_2 {
+ vmmc-supply = <&pm8226_l18>;
+ vqmmc-supply = <&pm8226_l21>;
+
+ bus-width = <4>;
+ cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&sdhc2_default_state &sdhc2_cd_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&tlmm {
+ accel_int_default: accel-int-default-state {
+ pins = "gpio64";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ gpio_hall_sensor_default: gpio-hall-sensor-default-state {
+ pins = "gpio50";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ gpio_keys_default: gpio-keys-default-state {
+ pins = "gpio106", "gpio107", "gpio108";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ motor_en_default: motor-en-default-state {
+ pins = "gpio111";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ sdhc2_cd_default: sdhc2-cd-default-state {
+ pins = "gpio38";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ tsp_en_default: tsp-en-default-state {
+ pins = "gpio31";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ tsp_int_default: tsp-int-default-state {
+ pins = "gpio17";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
--
2.39.2
next prev parent reply other threads:[~2024-06-30 13:29 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-30 13:29 [PATCH v3 0/2] ARM: dts: qcom-msm8226-samsung-ms013g: Add initial device tree Raymond Hackley
2024-06-30 13:29 ` [PATCH v3 1/2] dt-bindings: arm: qcom: Document samsung,ms013g Raymond Hackley
2024-07-02 10:47 ` Krzysztof Kozlowski
2024-06-30 13:29 ` Raymond Hackley [this message]
2024-07-01 18:10 ` [PATCH v3 0/2] ARM: dts: qcom-msm8226-samsung-ms013g: Add initial device tree Rob Herring (Arm)
2024-07-03 3:37 ` (subset) " Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240630132859.2885-3-raymondhackley@protonmail.com \
--to=raymondhackley@protonmail.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luca@lucaweiss.eu \
--cc=phone-devel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.