Re: [PATCH v6 05/10] PCI: imx6: Simplify switch-case logic by involve core_reset callback

[Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>]

On Mon, Jun 17, 2024 at 04:16:41PM -0400, Frank Li wrote:
> Instead of using the switch case statement to assert/dassert the core reset
> handled by this driver itself, let's introduce a new callback core_reset()
> and define it for platforms that require it. This simplifies the code.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

- Mani

> ---
>  drivers/pci/controller/dwc/pci-imx6.c | 134 ++++++++++++++++++----------------
>  1 file changed, 71 insertions(+), 63 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index ff9d0098294fa..6f68bee111029 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -104,6 +104,7 @@ struct imx_pcie_drvdata {
>  	const struct pci_epc_features *epc_features;
>  	int (*init_phy)(struct imx_pcie *pcie);
>  	int (*set_ref_clk)(struct imx_pcie *pcie, bool enable);
> +	int (*core_reset)(struct imx_pcie *pcie, bool assert);
>  };
>  
>  struct imx_pcie {
> @@ -672,35 +673,75 @@ static void imx_pcie_clk_disable(struct imx_pcie *imx_pcie)
>  	clk_bulk_disable_unprepare(imx_pcie->drvdata->clks_cnt, imx_pcie->clks);
>  }
>  
> +static int imx6sx_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert)
> +{
> +	if (assert)
> +		regmap_set_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12,
> +				IMX6SX_GPR12_PCIE_TEST_POWERDOWN);
> +
> +	/* Force PCIe PHY reset */
> +	regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR5, IMX6SX_GPR5_PCIE_BTNRST_RESET,
> +			   assert ? IMX6SX_GPR5_PCIE_BTNRST_RESET : 0);
> +	return 0;
> +}
> +
> +static int imx6qp_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert)
> +{
> +	regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, IMX6Q_GPR1_PCIE_SW_RST,
> +			   assert ? IMX6Q_GPR1_PCIE_SW_RST : 0);
> +	if (!assert)
> +		usleep_range(200, 500);
> +
> +	return 0;
> +}
> +
> +static int imx6q_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert)
> +{
> +	if (!assert)
> +		return 0;
> +
> +	regmap_set_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, IMX6Q_GPR1_PCIE_TEST_PD);
> +	regmap_set_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, IMX6Q_GPR1_PCIE_REF_CLK_EN);
> +
> +	return 0;
> +}
> +
> +static int imx7d_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert)
> +{
> +	struct dw_pcie *pci = imx_pcie->pci;
> +	struct device *dev = pci->dev;
> +
> +	if (assert)
> +		return 0;
> +
> +	/*
> +	 * Workaround for ERR010728, failure of PCI-e PLL VCO to
> +	 * oscillate, especially when cold. This turns off "Duty-cycle
> +	 * Corrector" and other mysterious undocumented things.
> +	 */
> +
> +	if (likely(imx_pcie->phy_base)) {
> +		/* De-assert DCC_FB_EN */
> +		writel(PCIE_PHY_CMN_REG4_DCC_FB_EN, imx_pcie->phy_base + PCIE_PHY_CMN_REG4);
> +		/* Assert RX_EQS and RX_EQS_SEL */
> +		writel(PCIE_PHY_CMN_REG24_RX_EQ_SEL | PCIE_PHY_CMN_REG24_RX_EQ,
> +		       imx_pcie->phy_base + PCIE_PHY_CMN_REG24);
> +		/* Assert ATT_MODE */
> +		writel(PCIE_PHY_CMN_REG26_ATT_MODE, imx_pcie->phy_base + PCIE_PHY_CMN_REG26);
> +	} else {
> +		dev_warn(dev, "Unable to apply ERR010728 workaround. DT missing fsl,imx7d-pcie-phy phandle ?\n");
> +	}
> +	imx7d_pcie_wait_for_phy_pll_lock(imx_pcie);
> +	return 0;
> +}
> +
>  static void imx_pcie_assert_core_reset(struct imx_pcie *imx_pcie)
>  {
>  	reset_control_assert(imx_pcie->pciephy_reset);
>  	reset_control_assert(imx_pcie->apps_reset);
>  
> -	switch (imx_pcie->drvdata->variant) {
> -	case IMX6SX:
> -		regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12,
> -				   IMX6SX_GPR12_PCIE_TEST_POWERDOWN,
> -				   IMX6SX_GPR12_PCIE_TEST_POWERDOWN);
> -		/* Force PCIe PHY reset */
> -		regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR5,
> -				   IMX6SX_GPR5_PCIE_BTNRST_RESET,
> -				   IMX6SX_GPR5_PCIE_BTNRST_RESET);
> -		break;
> -	case IMX6QP:
> -		regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1,
> -				   IMX6Q_GPR1_PCIE_SW_RST,
> -				   IMX6Q_GPR1_PCIE_SW_RST);
> -		break;
> -	case IMX6Q:
> -		regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1,
> -				   IMX6Q_GPR1_PCIE_TEST_PD, 1 << 18);
> -		regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1,
> -				   IMX6Q_GPR1_PCIE_REF_CLK_EN, 0 << 16);
> -		break;
> -	default:
> -		break;
> -	}
> +	if (imx_pcie->drvdata->core_reset)
> +		imx_pcie->drvdata->core_reset(imx_pcie, true);
>  
>  	/* Some boards don't have PCIe reset GPIO. */
>  	if (gpio_is_valid(imx_pcie->reset_gpio))
> @@ -710,47 +751,10 @@ static void imx_pcie_assert_core_reset(struct imx_pcie *imx_pcie)
>  
>  static int imx_pcie_deassert_core_reset(struct imx_pcie *imx_pcie)
>  {
> -	struct dw_pcie *pci = imx_pcie->pci;
> -	struct device *dev = pci->dev;
> -
>  	reset_control_deassert(imx_pcie->pciephy_reset);
>  
> -	switch (imx_pcie->drvdata->variant) {
> -	case IMX7D:
> -		/* Workaround for ERR010728, failure of PCI-e PLL VCO to
> -		 * oscillate, especially when cold.  This turns off "Duty-cycle
> -		 * Corrector" and other mysterious undocumented things.
> -		 */
> -		if (likely(imx_pcie->phy_base)) {
> -			/* De-assert DCC_FB_EN */
> -			writel(PCIE_PHY_CMN_REG4_DCC_FB_EN,
> -			       imx_pcie->phy_base + PCIE_PHY_CMN_REG4);
> -			/* Assert RX_EQS and RX_EQS_SEL */
> -			writel(PCIE_PHY_CMN_REG24_RX_EQ_SEL
> -				| PCIE_PHY_CMN_REG24_RX_EQ,
> -			       imx_pcie->phy_base + PCIE_PHY_CMN_REG24);
> -			/* Assert ATT_MODE */
> -			writel(PCIE_PHY_CMN_REG26_ATT_MODE,
> -			       imx_pcie->phy_base + PCIE_PHY_CMN_REG26);
> -		} else {
> -			dev_warn(dev, "Unable to apply ERR010728 workaround. DT missing fsl,imx7d-pcie-phy phandle ?\n");
> -		}
> -
> -		imx7d_pcie_wait_for_phy_pll_lock(imx_pcie);
> -		break;
> -	case IMX6SX:
> -		regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR5,
> -				   IMX6SX_GPR5_PCIE_BTNRST_RESET, 0);
> -		break;
> -	case IMX6QP:
> -		regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1,
> -				   IMX6Q_GPR1_PCIE_SW_RST, 0);
> -
> -		usleep_range(200, 500);
> -		break;
> -	default:
> -		break;
> -	}
> +	if (imx_pcie->drvdata->core_reset)
> +		imx_pcie->drvdata->core_reset(imx_pcie, false);
>  
>  	/* Some boards don't have PCIe reset GPIO. */
>  	if (gpio_is_valid(imx_pcie->reset_gpio)) {
> @@ -1458,6 +1462,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
>  		.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
>  		.init_phy = imx_pcie_init_phy,
>  		.set_ref_clk = imx6q_pcie_set_ref_clk,
> +		.core_reset = imx6q_pcie_core_reset,
>  	},
>  	[IMX6SX] = {
>  		.variant = IMX6SX,
> @@ -1473,6 +1478,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
>  		.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
>  		.init_phy = imx6sx_pcie_init_phy,
>  		.set_ref_clk = imx6sx_pcie_set_ref_clk,
> +		.core_reset = imx6sx_pcie_core_reset,
>  	},
>  	[IMX6QP] = {
>  		.variant = IMX6QP,
> @@ -1489,6 +1495,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
>  		.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
>  		.init_phy = imx_pcie_init_phy,
>  		.set_ref_clk = imx6q_pcie_set_ref_clk,
> +		.core_reset = imx6qp_pcie_core_reset,
>  	},
>  	[IMX7D] = {
>  		.variant = IMX7D,
> @@ -1502,6 +1509,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
>  		.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
>  		.init_phy = imx7d_pcie_init_phy,
>  		.set_ref_clk = imx7d_pcie_set_ref_clk,
> +		.core_reset = imx7d_pcie_core_reset,
>  	},
>  	[IMX8MQ] = {
>  		.variant = IMX8MQ,
> 
> -- 
> 2.34.1
> 

-- 
மணிவண்ணன் சதாசிவம்