From: Kongyang Liu <seashell11234455@gmail.com>
To: u-boot@lists.denx.de
Cc: Ben Dooks <ben.dooks@codethink.co.uk>,
Bin Meng <bmeng@tinylab.org>,
Dan Carpenter <dan.carpenter@linaro.org>,
Heinrich Schuchardt <xypron.glpk@gmx.de>,
Leo <ycliang@andestech.com>, Michal Simek <michal.simek@amd.com>,
Padmarao Begari <padmarao.begari@microchip.com>,
Randolph <randolph@andestech.com>, Rick Chen <rick@andestech.com>,
Samuel Holland <samuel@sholland.org>,
Tom Rini <trini@konsulko.com>,
Yu Chien Peter Lin <peterlin@andestech.com>
Subject: [PATCH v2 1/2] riscv: spacemit: bananapi_f3: initial support added
Date: Thu, 18 Jul 2024 12:33:22 +0800 [thread overview]
Message-ID: <20240718043329.1500-2-seashell11234455@gmail.com> (raw)
In-Reply-To: <20240718043329.1500-1-seashell11234455@gmail.com>
Add basic support for SpacemiT's Banana Pi F3 board
Signed-off-by: Kongyang Liu <seashell11234455@gmail.com>
---
Changes in v2:
- Change license to GPL-2.0-or-later
- Add memory node for dts
- Add ft_board_setup function for kernel memory init
- Use default prompt
arch/riscv/Kconfig | 5 +
arch/riscv/cpu/k1/Kconfig | 18 ++
arch/riscv/cpu/k1/Makefile | 6 +
arch/riscv/cpu/k1/cpu.c | 9 +
arch/riscv/cpu/k1/dram.c | 54 ++++
arch/riscv/dts/Makefile | 1 +
arch/riscv/dts/k1-bananapi-f3.dts | 25 ++
arch/riscv/dts/k1.dtsi | 375 +++++++++++++++++++++++++
board/spacemit/bananapi_f3/Kconfig | 25 ++
board/spacemit/bananapi_f3/MAINTAINERS | 6 +
board/spacemit/bananapi_f3/Makefile | 5 +
board/spacemit/bananapi_f3/board.c | 9 +
configs/bananapi_f3_defconfig | 20 ++
include/configs/bananapi_f3.h | 15 +
14 files changed, 573 insertions(+)
create mode 100644 arch/riscv/cpu/k1/Kconfig
create mode 100644 arch/riscv/cpu/k1/Makefile
create mode 100644 arch/riscv/cpu/k1/cpu.c
create mode 100644 arch/riscv/cpu/k1/dram.c
create mode 100644 arch/riscv/dts/k1-bananapi-f3.dts
create mode 100644 arch/riscv/dts/k1.dtsi
create mode 100644 board/spacemit/bananapi_f3/Kconfig
create mode 100644 board/spacemit/bananapi_f3/MAINTAINERS
create mode 100644 board/spacemit/bananapi_f3/Makefile
create mode 100644 board/spacemit/bananapi_f3/board.c
create mode 100644 configs/bananapi_f3_defconfig
create mode 100644 include/configs/bananapi_f3.h
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index fa3b016c52..211f19a585 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -11,6 +11,9 @@ choice
config TARGET_ANDES_AE350
bool "Support Andes ae350"
+config TARGET_BANANAPI_F3
+ bool "Support BananaPi F3 Board"
+
config TARGET_MICROCHIP_ICICLE
bool "Support Microchip PolarFire-SoC Icicle Board"
@@ -88,6 +91,7 @@ source "board/sifive/unleashed/Kconfig"
source "board/sifive/unmatched/Kconfig"
source "board/sipeed/maix/Kconfig"
source "board/sophgo/milkv_duo/Kconfig"
+source "board/spacemit/bananapi_f3/Kconfig"
source "board/starfive/visionfive2/Kconfig"
source "board/thead/th1520_lpi4a/Kconfig"
source "board/xilinx/mbv/Kconfig"
@@ -99,6 +103,7 @@ source "arch/riscv/cpu/fu540/Kconfig"
source "arch/riscv/cpu/fu740/Kconfig"
source "arch/riscv/cpu/generic/Kconfig"
source "arch/riscv/cpu/jh7110/Kconfig"
+source "arch/riscv/cpu/k1/Kconfig"
# architecture-specific options below
diff --git a/arch/riscv/cpu/k1/Kconfig b/arch/riscv/cpu/k1/Kconfig
new file mode 100644
index 0000000000..d9cd8dce96
--- /dev/null
+++ b/arch/riscv/cpu/k1/Kconfig
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# Copyright (C) 2024, Kongyang Liu <seashell11234455@gmail.com>
+
+config SPACEMIT_K1
+ bool
+ select BINMAN
+ select ARCH_EARLY_INIT_R
+ select SYS_CACHE_SHIFT_6
+ imply CPU
+ imply CPU_RISCV
+ imply RISCV_TIMER if (RISCV_SMODE || SPL_RISCV_SMODE)
+ imply RISCV_ACLINT if RISCV_MMODE
+ imply SPL_RISCV_ACLINT if SPL_RISCV_MMODE
+ imply CMD_CPU
+ imply SPL_CPU
+ imply SPL_OPENSBI
+ imply SPL_LOAD_FIT
diff --git a/arch/riscv/cpu/k1/Makefile b/arch/riscv/cpu/k1/Makefile
new file mode 100644
index 0000000000..bad4f4cf46
--- /dev/null
+++ b/arch/riscv/cpu/k1/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# Copyright (c) 2024, Kongyang Liu <seashell11234455@gmail.com>
+
+obj-y += dram.o
+obj-y += cpu.o
diff --git a/arch/riscv/cpu/k1/cpu.c b/arch/riscv/cpu/k1/cpu.c
new file mode 100644
index 0000000000..41a4a1b95e
--- /dev/null
+++ b/arch/riscv/cpu/k1/cpu.c
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2024, Kongyang Liu <seashell11234455@gmail.com>
+ */
+
+int cleanup_before_linux(void)
+{
+ return 0;
+}
diff --git a/arch/riscv/cpu/k1/dram.c b/arch/riscv/cpu/k1/dram.c
new file mode 100644
index 0000000000..c477c15cbf
--- /dev/null
+++ b/arch/riscv/cpu/k1/dram.c
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2024, Kongyang Liu <seashell11234455@gmail.com>
+ */
+
+#include <asm/global_data.h>
+#include <config.h>
+#include <fdt_support.h>
+#include <linux/sizes.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+ gd->ram_base = CFG_SYS_SDRAM_BASE;
+ /* TODO get ram size from ddr controller */
+ gd->ram_size = SZ_4G;
+ return 0;
+}
+
+int dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = CFG_SYS_SDRAM_BASE;
+ gd->bd->bi_dram[0].size = min_t(phys_size_t, gd->ram_size, SZ_2G);
+
+ if (gd->ram_size > SZ_2G && CONFIG_NR_DRAM_BANKS > 1) {
+ gd->bd->bi_dram[1].start = 0x100000000;
+ gd->bd->bi_dram[1].size = gd->ram_size - SZ_2G;
+ }
+
+ return 0;
+}
+
+phys_addr_t board_get_usable_ram_top(phys_size_t total_size)
+{
+ if (gd->ram_size > SZ_2G)
+ return SZ_2G;
+
+ return gd->ram_size;
+}
+
+int ft_board_setup(void *blob, struct bd_info *bd)
+{
+ u64 start[CONFIG_NR_DRAM_BANKS];
+ u64 size[CONFIG_NR_DRAM_BANKS];
+ int i;
+
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+ start[i] = gd->bd->bi_dram[i].start;
+ size[i] = gd->bd->bi_dram[i].size;
+ }
+
+ return fdt_fixup_memory_banks(blob, start, size, CONFIG_NR_DRAM_BANKS);
+}
diff --git a/arch/riscv/dts/Makefile b/arch/riscv/dts/Makefile
index 17cda483e1..71267f96f8 100644
--- a/arch/riscv/dts/Makefile
+++ b/arch/riscv/dts/Makefile
@@ -1,6 +1,7 @@
# SPDX-License-Identifier: GPL-2.0+
dtb-$(CONFIG_TARGET_ANDES_AE350) += ae350_32.dtb ae350_64.dtb
+dtb-$(CONFIG_TARGET_BANANAPI_F3) += k1-bananapi-f3.dtb
dtb-$(CONFIG_TARGET_MICROCHIP_ICICLE) += mpfs-icicle-kit.dtb
dtb-$(CONFIG_TARGET_MILKV_DUO) += cv1800b-milkv-duo.dtb
dtb-$(CONFIG_TARGET_QEMU_VIRT) += qemu-virt32.dtb qemu-virt64.dtb
diff --git a/arch/riscv/dts/k1-bananapi-f3.dts b/arch/riscv/dts/k1-bananapi-f3.dts
new file mode 100644
index 0000000000..06fd26578f
--- /dev/null
+++ b/arch/riscv/dts/k1-bananapi-f3.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2024 Yangyu Chen <cyy@cyyself.name>
+ */
+
+#include "k1.dtsi"
+#include "binman.dtsi"
+
+/ {
+ model = "Banana Pi BPI-F3";
+ compatible = "bananapi,bpi-f3", "spacemit,k1";
+
+ chosen {
+ stdout-path = "serial0";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x00000000 0x80000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/riscv/dts/k1.dtsi b/arch/riscv/dts/k1.dtsi
new file mode 100644
index 0000000000..b301f45fd5
--- /dev/null
+++ b/arch/riscv/dts/k1.dtsi
@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2024 Yangyu Chen <cyy@cyyself.name>
+ */
+
+/dts-v1/;
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ model = "SpacemiT K1";
+ compatible = "spacemit,k1";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ serial5 = &uart6;
+ serial6 = &uart7;
+ serial7 = &uart8;
+ serial8 = &uart9;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ timebase-frequency = <24000000>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu_0>;
+ };
+ core1 {
+ cpu = <&cpu_1>;
+ };
+ core2 {
+ cpu = <&cpu_2>;
+ };
+ core3 {
+ cpu = <&cpu_3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&cpu_4>;
+ };
+ core1 {
+ cpu = <&cpu_5>;
+ };
+ core2 {
+ cpu = <&cpu_6>;
+ };
+ core3 {
+ cpu = <&cpu_7>;
+ };
+ };
+ };
+
+ cpu_0: cpu@0 {
+ compatible = "spacemit,x60", "riscv";
+ device_type = "cpu";
+ reg = <0>;
+ riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
+ riscv,isa-base = "rv64i";
+ riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
+ "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
+ "zifencei", "zihintpause", "zihpm", "zfh", "zba",
+ "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
+ "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
+ riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
+ riscv,cboz-block-size = <64>;
+ mmu-type = "riscv,sv39";
+
+ cpu0_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ cpu_1: cpu@1 {
+ compatible = "spacemit,x60", "riscv";
+ device_type = "cpu";
+ reg = <1>;
+ riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
+ riscv,isa-base = "rv64i";
+ riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
+ "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
+ "zifencei", "zihintpause", "zihpm", "zfh", "zba",
+ "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
+ "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
+ riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
+ riscv,cboz-block-size = <64>;
+ mmu-type = "riscv,sv39";
+
+ cpu1_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ cpu_2: cpu@2 {
+ compatible = "spacemit,x60", "riscv";
+ device_type = "cpu";
+ reg = <2>;
+ riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
+ riscv,isa-base = "rv64i";
+ riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
+ "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
+ "zifencei", "zihintpause", "zihpm", "zfh", "zba",
+ "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
+ "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
+ riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
+ riscv,cboz-block-size = <64>;
+ mmu-type = "riscv,sv39";
+
+ cpu2_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ cpu_3: cpu@3 {
+ compatible = "spacemit,x60", "riscv";
+ device_type = "cpu";
+ reg = <3>;
+ riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
+ riscv,isa-base = "rv64i";
+ riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
+ "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
+ "zifencei", "zihintpause", "zihpm", "zfh", "zba",
+ "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
+ "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
+ riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
+ riscv,cboz-block-size = <64>;
+ mmu-type = "riscv,sv39";
+
+ cpu3_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ cpu_4: cpu@4 {
+ compatible = "spacemit,x60", "riscv";
+ device_type = "cpu";
+ reg = <4>;
+ riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
+ riscv,isa-base = "rv64i";
+ riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
+ "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
+ "zifencei", "zihintpause", "zihpm", "zfh", "zba",
+ "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
+ "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
+ riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
+ riscv,cboz-block-size = <64>;
+ mmu-type = "riscv,sv39";
+
+ cpu4_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ cpu_5: cpu@5 {
+ compatible = "spacemit,x60", "riscv";
+ device_type = "cpu";
+ reg = <5>;
+ riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
+ riscv,isa-base = "rv64i";
+ riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
+ "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
+ "zifencei", "zihintpause", "zihpm", "zfh", "zba",
+ "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
+ "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
+ riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
+ riscv,cboz-block-size = <64>;
+ mmu-type = "riscv,sv39";
+
+ cpu5_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ cpu_6: cpu@6 {
+ compatible = "spacemit,x60", "riscv";
+ device_type = "cpu";
+ reg = <6>;
+ riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
+ riscv,isa-base = "rv64i";
+ riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
+ "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
+ "zifencei", "zihintpause", "zihpm", "zfh", "zba",
+ "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
+ "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
+ riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
+ riscv,cboz-block-size = <64>;
+ mmu-type = "riscv,sv39";
+
+ cpu6_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ cpu_7: cpu@7 {
+ compatible = "spacemit,x60", "riscv";
+ device_type = "cpu";
+ reg = <7>;
+ riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
+ riscv,isa-base = "rv64i";
+ riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
+ "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
+ "zifencei", "zihintpause", "zihpm", "zfh", "zba",
+ "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
+ "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
+ riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
+ riscv,cboz-block-size = <64>;
+ mmu-type = "riscv,sv39";
+
+ cpu7_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&plic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ dma-noncoherent;
+ ranges;
+
+ uart0: serial@d4017000 {
+ compatible = "spacemit,k1-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xd4017000 0x0 0x100>;
+ interrupts = <42>;
+ clock-frequency = <14857000>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart2: serial@d4017100 {
+ compatible = "spacemit,k1-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xd4017100 0x0 0x100>;
+ interrupts = <44>;
+ clock-frequency = <14857000>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart3: serial@d4017200 {
+ compatible = "spacemit,k1-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xd4017200 0x0 0x100>;
+ interrupts = <45>;
+ clock-frequency = <14857000>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart4: serial@d4017300 {
+ compatible = "spacemit,k1-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xd4017300 0x0 0x100>;
+ interrupts = <46>;
+ clock-frequency = <14857000>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart5: serial@d4017400 {
+ compatible = "spacemit,k1-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xd4017400 0x0 0x100>;
+ interrupts = <47>;
+ clock-frequency = <14857000>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart6: serial@d4017500 {
+ compatible = "spacemit,k1-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xd4017500 0x0 0x100>;
+ interrupts = <48>;
+ clock-frequency = <14857000>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart7: serial@d4017600 {
+ compatible = "spacemit,k1-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xd4017600 0x0 0x100>;
+ interrupts = <49>;
+ clock-frequency = <14857000>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart8: serial@d4017700 {
+ compatible = "spacemit,k1-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xd4017700 0x0 0x100>;
+ interrupts = <50>;
+ clock-frequency = <14857000>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart9: serial@d4017800 {
+ compatible = "spacemit,k1-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xd4017800 0x0 0x100>;
+ interrupts = <51>;
+ clock-frequency = <14857000>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ plic: interrupt-controller@e0000000 {
+ compatible = "spacemit,k1-plic", "sifive,plic-1.0.0";
+ reg = <0x0 0xe0000000 0x0 0x4000000>;
+ interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>,
+ <&cpu1_intc 11>, <&cpu1_intc 9>,
+ <&cpu2_intc 11>, <&cpu2_intc 9>,
+ <&cpu3_intc 11>, <&cpu3_intc 9>,
+ <&cpu4_intc 11>, <&cpu4_intc 9>,
+ <&cpu5_intc 11>, <&cpu5_intc 9>,
+ <&cpu6_intc 11>, <&cpu6_intc 9>,
+ <&cpu7_intc 11>, <&cpu7_intc 9>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ riscv,ndev = <159>;
+ };
+
+ clint: timer@e4000000 {
+ compatible = "spacemit,k1-clint", "sifive,clint0";
+ reg = <0x0 0xe4000000 0x0 0x10000>;
+ interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+ <&cpu1_intc 3>, <&cpu1_intc 7>,
+ <&cpu2_intc 3>, <&cpu2_intc 7>,
+ <&cpu3_intc 3>, <&cpu3_intc 7>,
+ <&cpu4_intc 3>, <&cpu4_intc 7>,
+ <&cpu5_intc 3>, <&cpu5_intc 7>,
+ <&cpu6_intc 3>, <&cpu6_intc 7>,
+ <&cpu7_intc 3>, <&cpu7_intc 7>;
+ };
+ };
+};
diff --git a/board/spacemit/bananapi_f3/Kconfig b/board/spacemit/bananapi_f3/Kconfig
new file mode 100644
index 0000000000..0082a0d2af
--- /dev/null
+++ b/board/spacemit/bananapi_f3/Kconfig
@@ -0,0 +1,25 @@
+if TARGET_BANANAPI_F3
+
+config SYS_BOARD
+ default "bananapi_f3"
+
+config SYS_VENDOR
+ default "spacemit"
+
+config SYS_CPU
+ default "k1"
+
+config SYS_CONFIG_NAME
+ default "bananapi_f3"
+
+config TEXT_BASE
+ default 0x00200000
+
+config SPL_OPENSBI_LOAD_ADDR
+ default 0x00000000
+
+config BOARD_SPECIFIC_OPTIONS
+ def_bool y
+ select SPACEMIT_K1
+
+endif
diff --git a/board/spacemit/bananapi_f3/MAINTAINERS b/board/spacemit/bananapi_f3/MAINTAINERS
new file mode 100644
index 0000000000..fc0f8487e6
--- /dev/null
+++ b/board/spacemit/bananapi_f3/MAINTAINERS
@@ -0,0 +1,6 @@
+BananaPi F3
+M: Kongyang Liu <seashell11234455@gmail.com>
+S: Maintained
+F: board/spacemit/bananapi_f3/
+F: configs/bananapi_f3_defconfig
+F: doc/board/spacemit/bananapi_f3.rst
diff --git a/board/spacemit/bananapi_f3/Makefile b/board/spacemit/bananapi_f3/Makefile
new file mode 100644
index 0000000000..2168698402
--- /dev/null
+++ b/board/spacemit/bananapi_f3/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# Copyright (c) 2024, Kongyang Liu <seashell11234455@gmail.com>
+
+obj-y := board.o
diff --git a/board/spacemit/bananapi_f3/board.c b/board/spacemit/bananapi_f3/board.c
new file mode 100644
index 0000000000..2631cdd49e
--- /dev/null
+++ b/board/spacemit/bananapi_f3/board.c
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2024, Kongyang Liu <seashell11234455@gmail.com>
+ */
+
+int board_init(void)
+{
+ return 0;
+}
diff --git a/configs/bananapi_f3_defconfig b/configs/bananapi_f3_defconfig
new file mode 100644
index 0000000000..6363620208
--- /dev/null
+++ b/configs/bananapi_f3_defconfig
@@ -0,0 +1,20 @@
+CONFIG_RISCV=y
+CONFIG_SYS_MALLOC_LEN=0x1000000
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000000
+CONFIG_DEFAULT_DEVICE_TREE="k1-bananapi-f3"
+CONFIG_SYS_LOAD_ADDR=0x200000
+CONFIG_TARGET_BANANAPI_F3=y
+CONFIG_ARCH_RV64I=y
+CONFIG_RISCV_SMODE=y
+CONFIG_FIT=y
+CONFIG_SYS_BOOTM_LEN=0xa000000
+CONFIG_SUPPORT_RAW_INITRD=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_SYS_CBSIZE=256
+CONFIG_SYS_PBSIZE=276
+CONFIG_HUSH_PARSER=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_SYS_NS16550=y
+CONFIG_SYS_NS16550_MEM32=y
diff --git a/include/configs/bananapi_f3.h b/include/configs/bananapi_f3.h
new file mode 100644
index 0000000000..723bbaab69
--- /dev/null
+++ b/include/configs/bananapi_f3.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (c) 2024, Kongyang Liu <seashell11234455@gmail.com>
+ *
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <linux/serial_reg.h>
+
+#define CFG_SYS_SDRAM_BASE 0x0
+#define CFG_SYS_NS16550_IER UART_IER_UUE
+
+#endif /* __CONFIG_H */
--
2.41.0
next prev parent reply other threads:[~2024-07-18 4:34 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-18 4:33 [PATCH v2 0/2] riscv: spacemit: bananapi_f3: add support for Banana Pi F3 board Kongyang Liu
2024-07-18 4:33 ` Kongyang Liu [this message]
2024-09-09 6:40 ` [PATCH v2 1/2] riscv: spacemit: bananapi_f3: initial support added Leo Liang
2024-09-10 2:57 ` Leo Liang
2024-09-12 21:10 ` Marcel Ziswiler
2024-07-18 4:33 ` [PATCH v2 2/2] doc: spacemit: bananapi_f3: document Banana Pi F3 board Kongyang Liu
2024-09-09 6:41 ` Leo Liang
2024-09-12 21:10 ` Marcel Ziswiler
2024-09-12 21:09 ` [PATCH v2 0/2] riscv: spacemit: bananapi_f3: add support for " Marcel Ziswiler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240718043329.1500-2-seashell11234455@gmail.com \
--to=seashell11234455@gmail.com \
--cc=ben.dooks@codethink.co.uk \
--cc=bmeng@tinylab.org \
--cc=dan.carpenter@linaro.org \
--cc=michal.simek@amd.com \
--cc=padmarao.begari@microchip.com \
--cc=peterlin@andestech.com \
--cc=randolph@andestech.com \
--cc=rick@andestech.com \
--cc=samuel@sholland.org \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=xypron.glpk@gmx.de \
--cc=ycliang@andestech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.