From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>,
Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
Sasha Levin <sashal@kernel.org>,
robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
davem@davemloft.net, siyanteng@loongson.cn,
devicetree@vger.kernel.org, linux-mips@vger.kernel.org
Subject: [PATCH AUTOSEL 5.15 07/13] MIPS: Loongson64: DTS: Fix PCIe port nodes for ls7a
Date: Sun, 28 Jul 2024 12:08:49 -0400 [thread overview]
Message-ID: <20240728160907.2053634-7-sashal@kernel.org> (raw)
In-Reply-To: <20240728160907.2053634-1-sashal@kernel.org>
From: Jiaxun Yang <jiaxun.yang@flygoat.com>
[ Upstream commit d89a415ff8d5e0aad4963f2d8ebb0f9e8110b7fa ]
Add various required properties to silent warnings:
arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi:116.16-297.5: Warning (interrupt_provider): /bus@10000000/pci@1a000000: '#interrupt-cells' found, but node is not an interrupt provider
arch/mips/boot/dts/loongson/loongson64_2core_2k1000.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../boot/dts/loongson/loongson64-2k1000.dtsi | 37 +++++++++++++++----
1 file changed, 30 insertions(+), 7 deletions(-)
diff --git a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
index d73d8f4fd78e6..1093979b395bd 100644
--- a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
+++ b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
@@ -106,7 +106,6 @@ pci@1a000000 {
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
- #interrupt-cells = <2>;
reg = <0 0x1a000000 0 0x02000000>,
<0xfe 0x00000000 0 0x20000000>;
@@ -192,93 +191,117 @@ sata@8,0 {
interrupt-parent = <&liointc0>;
};
- pci_bridge@9,0 {
+ pcie@9,0 {
compatible = "pci0014,7a19.0",
"pci0014,7a19",
"pciclass060400",
"pciclass0604";
reg = <0x4800 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
#interrupt-cells = <1>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&liointc1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &liointc1 0 IRQ_TYPE_LEVEL_LOW>;
+ ranges;
external-facing;
};
- pci_bridge@a,0 {
+ pcie@a,0 {
compatible = "pci0014,7a09.0",
"pci0014,7a09",
"pciclass060400",
"pciclass0604";
reg = <0x5000 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
#interrupt-cells = <1>;
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&liointc1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &liointc1 1 IRQ_TYPE_LEVEL_LOW>;
+ ranges;
external-facing;
};
- pci_bridge@b,0 {
+ pcie@b,0 {
compatible = "pci0014,7a09.0",
"pci0014,7a09",
"pciclass060400",
"pciclass0604";
reg = <0x5800 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
#interrupt-cells = <1>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&liointc1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &liointc1 2 IRQ_TYPE_LEVEL_LOW>;
+ ranges;
external-facing;
};
- pci_bridge@c,0 {
+ pcie@c,0 {
compatible = "pci0014,7a09.0",
"pci0014,7a09",
"pciclass060400",
"pciclass0604";
reg = <0x6000 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
#interrupt-cells = <1>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&liointc1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &liointc1 3 IRQ_TYPE_LEVEL_LOW>;
+ ranges;
external-facing;
};
- pci_bridge@d,0 {
+ pcie@d,0 {
compatible = "pci0014,7a19.0",
"pci0014,7a19",
"pciclass060400",
"pciclass0604";
reg = <0x6800 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
#interrupt-cells = <1>;
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&liointc1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &liointc1 4 IRQ_TYPE_LEVEL_LOW>;
+ ranges;
external-facing;
};
- pci_bridge@e,0 {
+ pcie@e,0 {
compatible = "pci0014,7a09.0",
"pci0014,7a09",
"pciclass060400",
"pciclass0604";
reg = <0x7000 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
#interrupt-cells = <1>;
interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&liointc1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &liointc1 5 IRQ_TYPE_LEVEL_LOW>;
+ ranges;
external-facing;
};
--
2.43.0
next prev parent reply other threads:[~2024-07-28 16:09 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-28 16:08 [PATCH AUTOSEL 5.15 01/13] PCI: Add ACS quirk for Broadcom BCM5760X NIC Sasha Levin
2024-07-28 16:08 ` [PATCH AUTOSEL 5.15 02/13] PCI: Use preserve_config in place of pci_flags Sasha Levin
2024-07-28 16:08 ` [PATCH AUTOSEL 5.15 03/13] usb: cdns3: Add quirk flag to enable suspend residency Sasha Levin
2024-07-28 16:08 ` [PATCH AUTOSEL 5.15 04/13] usb: dwc2: gadget: Don't write invalid mapped sg entries into dma_desc with iommu enabled Sasha Levin
2024-07-28 16:08 ` [PATCH AUTOSEL 5.15 05/13] usb: typec: ucsi: Fix null pointer dereference in trace Sasha Levin
2024-07-28 16:08 ` [PATCH AUTOSEL 5.15 06/13] MIPS: Loongson64: DTS: Fix msi node for ls7a Sasha Levin
2024-07-28 16:08 ` Sasha Levin [this message]
2024-07-28 16:08 ` [PATCH AUTOSEL 5.15 08/13] PCI/AER: Disable AER service on suspend Sasha Levin
2024-07-28 16:08 ` Sasha Levin
2024-07-28 16:08 ` [PATCH AUTOSEL 5.15 09/13] ASoC: Intel: sof_sdw: fix jack detection on ADL-N variant RVP Sasha Levin
2024-07-28 16:08 ` [PATCH AUTOSEL 5.15 10/13] PCI: keystone: Add workaround for Errata #i2037 (AM65x SR 1.0) Sasha Levin
2024-07-28 16:08 ` [PATCH AUTOSEL 5.15 11/13] PCI: vmd: Create domain symlink before pci_bus_add_devices() Sasha Levin
2024-07-28 16:08 ` [PATCH AUTOSEL 5.15 12/13] PCI: Add missing bridge lock to pci_bus_lock() Sasha Levin
2024-07-28 16:08 ` [PATCH AUTOSEL 5.15 13/13] ALSA: usb: Fix UBSAN warning in parse_audio_unit() Sasha Levin
2024-12-17 6:24 ` Harshit Mogalapalli
2024-12-17 19:15 ` Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240728160907.2053634-7-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=jiaxun.yang@flygoat.com \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=robh@kernel.org \
--cc=siyanteng@loongson.cn \
--cc=stable@vger.kernel.org \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.