From: Elad Yifee <eladwf@gmail.com>
To: Felix Fietkau <nbd@nbd.name>, Sean Wang <sean.wang@mediatek.com>,
Mark Lee <Mark-MC.Lee@mediatek.com>,
Lorenzo Bianconi <lorenzo@kernel.org>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org
Cc: Elad Yifee <eladwf@gmail.com>,
Daniel Golle <daniel@makrotopia.org>,
Joe Damato <jdamato@fastly.com>
Subject: [PATCH net-next v2 1/2] net: ethernet: mtk_eth_soc: use prefetch methods
Date: Mon, 29 Jul 2024 21:29:54 +0300 [thread overview]
Message-ID: <20240729183038.1959-2-eladwf@gmail.com> (raw)
In-Reply-To: <20240729183038.1959-1-eladwf@gmail.com>
Utilize kernel prefetch methods for faster cache line access.
This change boosts driver performance,
allowing the CPU to handle about 5% more packets/sec.
Signed-off-by: Elad Yifee <eladwf@gmail.com>
---
Changes in v2:
- use net_prefetchw as suggested by Joe Damato
- add (NET_SKB_PAD + eth->ip_align) offset to prefetched data
- use eth->ip_align instead of NET_IP_ALIGN as it could be 0,
depending on the platform
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 16ca427cf4c3..4d0052dbe3f4 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -1963,6 +1963,7 @@ static u32 mtk_xdp_run(struct mtk_eth *eth, struct mtk_rx_ring *ring,
if (!prog)
goto out;
+ net_prefetchw(xdp->data_hard_start);
act = bpf_prog_run_xdp(prog, xdp);
switch (act) {
case XDP_PASS:
@@ -2038,6 +2039,7 @@ static int mtk_poll_rx(struct napi_struct *napi, int budget,
idx = NEXT_DESP_IDX(ring->calc_idx, ring->dma_size);
rxd = ring->dma + idx * eth->soc->rx.desc_size;
+ prefetch(rxd);
data = ring->data[idx];
if (!mtk_rx_get_desc(eth, &trxd, rxd))
@@ -2105,6 +2107,7 @@ static int mtk_poll_rx(struct napi_struct *napi, int budget,
if (ret != XDP_PASS)
goto skip_rx;
+ net_prefetch(xdp.data_meta);
skb = build_skb(data, PAGE_SIZE);
if (unlikely(!skb)) {
page_pool_put_full_page(ring->page_pool,
@@ -2113,6 +2116,7 @@ static int mtk_poll_rx(struct napi_struct *napi, int budget,
goto skip_rx;
}
+ net_prefetchw(skb->data);
skb_reserve(skb, xdp.data - xdp.data_hard_start);
skb_put(skb, xdp.data_end - xdp.data);
skb_mark_for_recycle(skb);
@@ -2143,6 +2147,7 @@ static int mtk_poll_rx(struct napi_struct *napi, int budget,
dma_unmap_single(eth->dma_dev, ((u64)trxd.rxd1 | addr64),
ring->buf_size, DMA_FROM_DEVICE);
+ net_prefetch(data + NET_SKB_PAD + eth->ip_align);
skb = build_skb(data, ring->frag_size);
if (unlikely(!skb)) {
netdev->stats.rx_dropped++;
@@ -2150,7 +2155,8 @@ static int mtk_poll_rx(struct napi_struct *napi, int budget,
goto skip_rx;
}
- skb_reserve(skb, NET_SKB_PAD + NET_IP_ALIGN);
+ net_prefetchw(skb->data);
+ skb_reserve(skb, NET_SKB_PAD + eth->ip_align);
skb_put(skb, pktlen);
}
--
2.45.2
next prev parent reply other threads:[~2024-07-29 18:31 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-29 18:29 [PATCH net-next v2 0/2] net: ethernet: mtk_eth_soc: improve RX performance Elad Yifee
2024-07-29 18:29 ` Elad Yifee [this message]
2024-07-30 8:59 ` [PATCH net-next v2 1/2] net: ethernet: mtk_eth_soc: use prefetch methods Joe Damato
2024-07-30 18:35 ` Elad Yifee
2024-08-01 7:09 ` Stefan Roese
2024-08-01 13:14 ` Joe Damato
2025-01-06 14:28 ` Shengyu Qu
2025-01-21 23:50 ` Andrew Lunn
2024-07-29 18:29 ` [PATCH net-next v2 2/2] net: ethernet: mtk_eth_soc: use PP exclusively for XDP programs Elad Yifee
2024-07-29 19:10 ` [PATCH net-next v2 0/2] net: ethernet: mtk_eth_soc: improve RX performance Lorenzo Bianconi
2024-07-30 5:29 ` Elad Yifee
2024-08-01 1:37 ` Jakub Kicinski
2024-08-01 3:53 ` Elad Yifee
2024-08-01 7:30 ` Lorenzo Bianconi
2024-08-01 8:01 ` Elad Yifee
2024-08-01 8:15 ` Lorenzo Bianconi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240729183038.1959-2-eladwf@gmail.com \
--to=eladwf@gmail.com \
--cc=Mark-MC.Lee@mediatek.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=daniel@makrotopia.org \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=jdamato@fastly.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=lorenzo@kernel.org \
--cc=matthias.bgg@gmail.com \
--cc=nbd@nbd.name \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=sean.wang@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.