From: <gregkh@linuxfoundation.org>
To: shenwei.wang@nxp.com,tglx@linutronix.de
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] irqchip/imx-irqsteer: Handle runtime power management" failed to apply to 5.10-stable tree
Date: Tue, 30 Jul 2024 11:06:44 +0200 [thread overview]
Message-ID: <2024073044-karma-purchase-032d@gregkh> (raw)
The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x 33b1c47d1fc0b5f06a393bb915db85baacba18ea
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2024073044-karma-purchase-032d@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..
Possible dependencies:
33b1c47d1fc0 ("irqchip/imx-irqsteer: Handle runtime power management correctly")
e9a50f12e579 ("irqchip/imx-irqsteer: Constify irq_chip struct")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 33b1c47d1fc0b5f06a393bb915db85baacba18ea Mon Sep 17 00:00:00 2001
From: Shenwei Wang <shenwei.wang@nxp.com>
Date: Wed, 3 Jul 2024 11:32:50 -0500
Subject: [PATCH] irqchip/imx-irqsteer: Handle runtime power management
correctly
The power domain is automatically activated from clk_prepare(). However, on
certain platforms like i.MX8QM and i.MX8QXP, the power-on handling invokes
sleeping functions, which triggers the 'scheduling while atomic' bug in the
context switch path during device probing:
BUG: scheduling while atomic: kworker/u13:1/48/0x00000002
Call trace:
__schedule_bug+0x54/0x6c
__schedule+0x7f0/0xa94
schedule+0x5c/0xc4
schedule_preempt_disabled+0x24/0x40
__mutex_lock.constprop.0+0x2c0/0x540
__mutex_lock_slowpath+0x14/0x20
mutex_lock+0x48/0x54
clk_prepare_lock+0x44/0xa0
clk_prepare+0x20/0x44
imx_irqsteer_resume+0x28/0xe0
pm_generic_runtime_resume+0x2c/0x44
__genpd_runtime_resume+0x30/0x80
genpd_runtime_resume+0xc8/0x2c0
__rpm_callback+0x48/0x1d8
rpm_callback+0x6c/0x78
rpm_resume+0x490/0x6b4
__pm_runtime_resume+0x50/0x94
irq_chip_pm_get+0x2c/0xa0
__irq_do_set_handler+0x178/0x24c
irq_set_chained_handler_and_data+0x60/0xa4
mxc_gpio_probe+0x160/0x4b0
Cure this by implementing the irq_bus_lock/sync_unlock() interrupt chip
callbacks and handle power management in them as they are invoked from
non-atomic context.
[ tglx: Rewrote change log, added Fixes tag ]
Fixes: 0136afa08967 ("irqchip: Add driver for imx-irqsteer controller")
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240703163250.47887-1-shenwei.wang@nxp.com
diff --git a/drivers/irqchip/irq-imx-irqsteer.c b/drivers/irqchip/irq-imx-irqsteer.c
index 20cf7a9e9ece..75a0e980ff35 100644
--- a/drivers/irqchip/irq-imx-irqsteer.c
+++ b/drivers/irqchip/irq-imx-irqsteer.c
@@ -36,6 +36,7 @@ struct irqsteer_data {
int channel;
struct irq_domain *domain;
u32 *saved_reg;
+ struct device *dev;
};
static int imx_irqsteer_get_reg_index(struct irqsteer_data *data,
@@ -72,10 +73,26 @@ static void imx_irqsteer_irq_mask(struct irq_data *d)
raw_spin_unlock_irqrestore(&data->lock, flags);
}
+static void imx_irqsteer_irq_bus_lock(struct irq_data *d)
+{
+ struct irqsteer_data *data = d->chip_data;
+
+ pm_runtime_get_sync(data->dev);
+}
+
+static void imx_irqsteer_irq_bus_sync_unlock(struct irq_data *d)
+{
+ struct irqsteer_data *data = d->chip_data;
+
+ pm_runtime_put_autosuspend(data->dev);
+}
+
static const struct irq_chip imx_irqsteer_irq_chip = {
- .name = "irqsteer",
- .irq_mask = imx_irqsteer_irq_mask,
- .irq_unmask = imx_irqsteer_irq_unmask,
+ .name = "irqsteer",
+ .irq_mask = imx_irqsteer_irq_mask,
+ .irq_unmask = imx_irqsteer_irq_unmask,
+ .irq_bus_lock = imx_irqsteer_irq_bus_lock,
+ .irq_bus_sync_unlock = imx_irqsteer_irq_bus_sync_unlock,
};
static int imx_irqsteer_irq_map(struct irq_domain *h, unsigned int irq,
@@ -150,6 +167,7 @@ static int imx_irqsteer_probe(struct platform_device *pdev)
if (!data)
return -ENOMEM;
+ data->dev = &pdev->dev;
data->regs = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(data->regs)) {
dev_err(&pdev->dev, "failed to initialize reg\n");
reply other threads:[~2024-07-30 9:06 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2024073044-karma-purchase-032d@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=shenwei.wang@nxp.com \
--cc=stable@vger.kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.