From: <gregkh@linuxfoundation.org>
To: jiaxun.yang@flygoat.com,tsbogend@alpha.franken.de
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] MIPS: dts: loongson: Fix liointc IRQ polarity" failed to apply to 5.15-stable tree
Date: Tue, 30 Jul 2024 12:27:56 +0200 [thread overview]
Message-ID: <2024073056-clarinet-unknown-f45b@gregkh> (raw)
The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y
git checkout FETCH_HEAD
git cherry-pick -x dbb69b9d6234aad23b3ecd33e5bc8a8ae1485b7d
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2024073056-clarinet-unknown-f45b@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^..
Possible dependencies:
dbb69b9d6234 ("MIPS: dts: loongson: Fix liointc IRQ polarity")
d89a415ff8d5 ("MIPS: Loongson64: DTS: Fix PCIe port nodes for ls7a")
e47084e116fc ("MIPS: Loongson64: DTS: Add RTC support to Loongson-2K1000")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From dbb69b9d6234aad23b3ecd33e5bc8a8ae1485b7d Mon Sep 17 00:00:00 2001
From: Jiaxun Yang <jiaxun.yang@flygoat.com>
Date: Fri, 14 Jun 2024 16:40:10 +0100
Subject: [PATCH] MIPS: dts: loongson: Fix liointc IRQ polarity
All internal liointc interrupts are high level triggered.
Fixes: b1a792601f26 ("MIPS: Loongson64: DeviceTree for Loongson-2K1000")
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
diff --git a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
index f5a74338bf05..3f5255584c30 100644
--- a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
+++ b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
@@ -93,7 +93,7 @@ rtc0: rtc@1fe07800 {
compatible = "loongson,ls2k1000-rtc";
reg = <0 0x1fe07800 0 0x78>;
interrupt-parent = <&liointc0>;
- interrupts = <60 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <60 IRQ_TYPE_LEVEL_HIGH>;
};
uart0: serial@1fe00000 {
@@ -101,7 +101,7 @@ uart0: serial@1fe00000 {
reg = <0 0x1fe00000 0 0x8>;
clock-frequency = <125000000>;
interrupt-parent = <&liointc0>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
no-loopback-test;
};
@@ -124,8 +124,8 @@ gmac@3,0 {
"pciclass0c03";
reg = <0x1800 0x0 0x0 0x0 0x0>;
- interrupts = <12 IRQ_TYPE_LEVEL_LOW>,
- <13 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <12 IRQ_TYPE_LEVEL_HIGH>,
+ <13 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq", "eth_lpi";
interrupt-parent = <&liointc0>;
phy-mode = "rgmii";
@@ -147,8 +147,8 @@ gmac@3,1 {
"loongson, pci-gmac";
reg = <0x1900 0x0 0x0 0x0 0x0>;
- interrupts = <14 IRQ_TYPE_LEVEL_LOW>,
- <15 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
+ <15 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq", "eth_lpi";
interrupt-parent = <&liointc0>;
phy-mode = "rgmii";
@@ -169,7 +169,7 @@ ehci@4,1 {
"pciclass0c03";
reg = <0x2100 0x0 0x0 0x0 0x0>;
- interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&liointc1>;
};
@@ -180,7 +180,7 @@ ohci@4,2 {
"pciclass0c03";
reg = <0x2200 0x0 0x0 0x0 0x0>;
- interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&liointc1>;
};
@@ -191,7 +191,7 @@ sata@8,0 {
"pciclass0106";
reg = <0x4000 0x0 0x0 0x0 0x0>;
- interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&liointc0>;
};
@@ -206,10 +206,10 @@ pcie@9,0 {
#size-cells = <2>;
device_type = "pci";
#interrupt-cells = <1>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&liointc1>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &liointc1 0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-map = <0 0 0 0 &liointc1 0 IRQ_TYPE_LEVEL_HIGH>;
ranges;
external-facing;
};
@@ -225,10 +225,10 @@ pcie@a,0 {
#size-cells = <2>;
device_type = "pci";
#interrupt-cells = <1>;
- interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&liointc1>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &liointc1 1 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-map = <0 0 0 0 &liointc1 1 IRQ_TYPE_LEVEL_HIGH>;
ranges;
external-facing;
};
@@ -244,10 +244,10 @@ pcie@b,0 {
#size-cells = <2>;
device_type = "pci";
#interrupt-cells = <1>;
- interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&liointc1>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &liointc1 2 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-map = <0 0 0 0 &liointc1 2 IRQ_TYPE_LEVEL_HIGH>;
ranges;
external-facing;
};
@@ -263,10 +263,10 @@ pcie@c,0 {
#size-cells = <2>;
device_type = "pci";
#interrupt-cells = <1>;
- interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&liointc1>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &liointc1 3 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-map = <0 0 0 0 &liointc1 3 IRQ_TYPE_LEVEL_HIGH>;
ranges;
external-facing;
};
@@ -282,10 +282,10 @@ pcie@d,0 {
#size-cells = <2>;
device_type = "pci";
#interrupt-cells = <1>;
- interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&liointc1>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &liointc1 4 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-map = <0 0 0 0 &liointc1 4 IRQ_TYPE_LEVEL_HIGH>;
ranges;
external-facing;
};
@@ -301,10 +301,10 @@ pcie@e,0 {
#size-cells = <2>;
device_type = "pci";
#interrupt-cells = <1>;
- interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&liointc1>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &liointc1 5 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-map = <0 0 0 0 &liointc1 5 IRQ_TYPE_LEVEL_HIGH>;
ranges;
external-facing;
};
reply other threads:[~2024-07-30 10:28 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2024073056-clarinet-unknown-f45b@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=jiaxun.yang@flygoat.com \
--cc=stable@vger.kernel.org \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.