From: Ilya Leoshkevich <iii@linux.ibm.com>
To: "Laurent Vivier" <laurent@vivier.eu>,
"Alex Bennée" <alex.bennee@linaro.org>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Paolo Bonzini" <pbonzini@redhat.com>,
"Richard Henderson" <richard.henderson@linaro.org>
Cc: qemu-devel@nongnu.org, Ilya Leoshkevich <iii@linux.ibm.com>
Subject: [PATCH 3/5] target/i386/gdbstub: Factor out gdb_get_reg() and gdb_write_reg()
Date: Fri, 2 Aug 2024 11:59:16 +0200 [thread overview]
Message-ID: <20240802095942.34565-4-iii@linux.ibm.com> (raw)
In-Reply-To: <20240802095942.34565-1-iii@linux.ibm.com>
i386 gdbstub handles both i386 and x86_64. Factor out two functions
for reading and writing registers without knowing their bitness.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
---
target/i386/gdbstub.c | 52 ++++++++++++++++++++++++++-----------------
1 file changed, 31 insertions(+), 21 deletions(-)
diff --git a/target/i386/gdbstub.c b/target/i386/gdbstub.c
index 4acf485879e..ec64ab6c53f 100644
--- a/target/i386/gdbstub.c
+++ b/target/i386/gdbstub.c
@@ -96,6 +96,19 @@ static int gdb_write_reg_cs64(uint32_t hflags, uint8_t *buf, target_ulong *val)
return 4;
}
+static int gdb_get_reg(CPUX86State *env, GByteArray *mem_buf, target_ulong val)
+{
+ if (TARGET_LONG_BITS == 64) {
+ if (env->hflags & HF_CS64_MASK) {
+ return gdb_get_reg64(mem_buf, val);
+ } else {
+ return gdb_get_reg64(mem_buf, val & 0xffffffffUL);
+ }
+ } else {
+ return gdb_get_reg32(mem_buf, val);
+ }
+}
+
int x86_cpu_gdb_read_register(CPUState *cs, GByteArray *mem_buf, int n)
{
X86CPU *cpu = X86_CPU(cs);
@@ -137,15 +150,7 @@ int x86_cpu_gdb_read_register(CPUState *cs, GByteArray *mem_buf, int n)
} else {
switch (n) {
case IDX_IP_REG:
- if (TARGET_LONG_BITS == 64) {
- if (env->hflags & HF_CS64_MASK) {
- return gdb_get_reg64(mem_buf, env->eip);
- } else {
- return gdb_get_reg64(mem_buf, env->eip & 0xffffffffUL);
- }
- } else {
- return gdb_get_reg32(mem_buf, env->eip);
- }
+ return gdb_get_reg(env, mem_buf, env->eip);
case IDX_FLAGS_REG:
return gdb_get_reg32(mem_buf, env->eflags);
@@ -248,6 +253,22 @@ static int x86_cpu_gdb_load_seg(X86CPU *cpu, X86Seg sreg, uint8_t *mem_buf)
return 4;
}
+static int gdb_write_reg(CPUX86State *env, uint8_t *mem_buf, target_ulong *val)
+{
+ if (TARGET_LONG_BITS == 64) {
+ if (env->hflags & HF_CS64_MASK) {
+ *val = ldq_p(mem_buf);
+ } else {
+ *val = ldq_p(mem_buf) & 0xffffffffUL;
+ }
+ return 8;
+ } else {
+ *val &= ~0xffffffffUL;
+ *val |= (uint32_t)ldl_p(mem_buf);
+ return 4;
+ }
+}
+
int x86_cpu_gdb_write_register(CPUState *cs, uint8_t *mem_buf, int n)
{
X86CPU *cpu = X86_CPU(cs);
@@ -288,18 +309,7 @@ int x86_cpu_gdb_write_register(CPUState *cs, uint8_t *mem_buf, int n)
} else {
switch (n) {
case IDX_IP_REG:
- if (TARGET_LONG_BITS == 64) {
- if (env->hflags & HF_CS64_MASK) {
- env->eip = ldq_p(mem_buf);
- } else {
- env->eip = ldq_p(mem_buf) & 0xffffffffUL;
- }
- return 8;
- } else {
- env->eip &= ~0xffffffffUL;
- env->eip |= (uint32_t)ldl_p(mem_buf);
- return 4;
- }
+ return gdb_write_reg(env, mem_buf, &env->eip);
case IDX_FLAGS_REG:
env->eflags = ldl_p(mem_buf);
return 4;
--
2.45.2
next prev parent reply other threads:[~2024-08-02 10:03 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-02 9:59 [PATCH 0/4] linux-user/i386: Emulate orig_ax Ilya Leoshkevich
2024-08-02 9:59 ` [PATCH 1/5] include/exec: Introduce env_cpu_const() Ilya Leoshkevich
2024-09-08 19:46 ` Richard Henderson
2024-08-02 9:59 ` [PATCH 2/5] linux-user/i386: Emulate orig_ax Ilya Leoshkevich
2024-09-08 20:50 ` Richard Henderson
2024-08-02 9:59 ` Ilya Leoshkevich [this message]
2024-09-08 20:57 ` [PATCH 3/5] target/i386/gdbstub: Factor out gdb_get_reg() and gdb_write_reg() Richard Henderson
2024-08-02 9:59 ` [PATCH 4/5] target/i386/gdbstub: Expose orig_ax Ilya Leoshkevich
2024-09-08 21:00 ` Richard Henderson
2024-08-02 9:59 ` [PATCH 5/5] tests/tcg: Run test-proc-mappings.py on i386 Ilya Leoshkevich
2024-08-02 10:40 ` Alex Bennée
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240802095942.34565-4-iii@linux.ibm.com \
--to=iii@linux.ibm.com \
--cc=alex.bennee@linaro.org \
--cc=laurent@vivier.eu \
--cc=pbonzini@redhat.com \
--cc=philmd@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.