From: Dhruva Gole <d-gole@ti.com>
To: Tom Rini <trini@konsulko.com>, Nishant Menon <nm@ti.com>
Cc: <u-boot@lists.denx.de>, Neha Malcom Francis <n-francis@ti.com>,
<c-shilwant@ti.com>, <m-chawdhry@ti.com>, <vigneshr@ti.com>,
Robert Nelson <robertcnelson@gmail.com>,
Vibhore Vardhan <vibhore@ti.com>,
Vishal Mahaveer <vishalm@ti.com>,
Sebin Francis <sebin.francis@ti.com>,
Wadim Egorov <w.egorov@phytec.de>, <t.remmet@phytec.de>,
<mkorpershoek@baylibre.com>, Daniel Schultz <d.schultz@phytec.de>,
Dhruva Gole <d-gole@ti.com>
Subject: [PATCH V8 3/7] doc: board: ti: Update to use the new boot firmware labels
Date: Mon, 5 Aug 2024 19:59:33 +0530 [thread overview]
Message-ID: <20240805142937.443737-4-d-gole@ti.com> (raw)
In-Reply-To: <20240805142937.443737-1-d-gole@ti.com>
Use the new boot_firmwares labels that help make documentation more
specific as to which firmwares are used in which devices
Signed-off-by: Dhruva Gole <d-gole@ti.com>
---
doc/board/beagle/j721e_beagleboneai64.rst | 4 ++++
doc/board/phytec/phycore-am62x.rst | 4 ++++
doc/board/phytec/phycore-am64x.rst | 4 ++++
doc/board/ti/am64x_evm.rst | 4 ++++
doc/board/ti/am65x_evm.rst | 4 ++++
doc/board/ti/j7200_evm.rst | 4 ++++
doc/board/ti/j721e_evm.rst | 4 ++++
doc/board/ti/j721s2_evm.rst | 4 ++++
doc/board/ti/j722s_evm.rst | 4 ++++
doc/board/ti/j784s4_evm.rst | 4 ++++
10 files changed, 40 insertions(+)
diff --git a/doc/board/beagle/j721e_beagleboneai64.rst b/doc/board/beagle/j721e_beagleboneai64.rst
index d6b9c8ca606a..090b2b3b86ae 100644
--- a/doc/board/beagle/j721e_beagleboneai64.rst
+++ b/doc/board/beagle/j721e_beagleboneai64.rst
@@ -42,6 +42,10 @@ Sources:
:start-after: .. k3_rst_include_start_boot_sources
:end-before: .. k3_rst_include_end_boot_sources
+.. include:: ../ti/k3.rst
+ :start-after: .. k3_rst_include_start_boot_firmwares
+ :end-before: .. k3_rst_include_end_boot_firmwares
+
Build procedure:
----------------
0. Setup the environment variables:
diff --git a/doc/board/phytec/phycore-am62x.rst b/doc/board/phytec/phycore-am62x.rst
index a7ce2c58825b..af24acf9aac4 100644
--- a/doc/board/phytec/phycore-am62x.rst
+++ b/doc/board/phytec/phycore-am62x.rst
@@ -30,6 +30,10 @@ Sources
:start-after: .. k3_rst_include_start_boot_sources
:end-before: .. k3_rst_include_end_boot_sources
+.. include:: ../ti/k3.rst
+ :start-after: .. k3_rst_include_start_boot_firmwares
+ :end-before: .. k3_rst_include_end_boot_firmwares
+
Build procedure
---------------
diff --git a/doc/board/phytec/phycore-am64x.rst b/doc/board/phytec/phycore-am64x.rst
index 68d78ad7c25a..01c42b906607 100644
--- a/doc/board/phytec/phycore-am64x.rst
+++ b/doc/board/phytec/phycore-am64x.rst
@@ -30,6 +30,10 @@ Sources
:start-after: .. k3_rst_include_start_boot_sources
:end-before: .. k3_rst_include_end_boot_sources
+.. include:: ../ti/k3.rst
+ :start-after: .. k3_rst_include_start_boot_firmwares_sysfw
+ :end-before: .. k3_rst_include_end_boot_firmwares_sysfw
+
Build procedure
---------------
diff --git a/doc/board/ti/am64x_evm.rst b/doc/board/ti/am64x_evm.rst
index 88997b6a283e..65c4c456528c 100644
--- a/doc/board/ti/am64x_evm.rst
+++ b/doc/board/ti/am64x_evm.rst
@@ -48,6 +48,10 @@ Sources:
:start-after: .. k3_rst_include_start_boot_sources
:end-before: .. k3_rst_include_end_boot_sources
+.. include:: k3.rst
+ :start-after: .. k3_rst_include_start_boot_firmwares_sysfw
+ :end-before: .. k3_rst_include_end_boot_firmwares_sysfw
+
Build procedure:
----------------
0. Setup the environment variables:
diff --git a/doc/board/ti/am65x_evm.rst b/doc/board/ti/am65x_evm.rst
index 89011c08dd46..60b08ceebf0f 100644
--- a/doc/board/ti/am65x_evm.rst
+++ b/doc/board/ti/am65x_evm.rst
@@ -58,6 +58,10 @@ Sources:
:start-after: .. k3_rst_include_start_boot_sources
:end-before: .. k3_rst_include_end_boot_sources
+.. include:: k3.rst
+ :start-after: .. k3_rst_include_start_boot_firmwares_sysfw
+ :end-before: .. k3_rst_include_end_boot_firmwares_sysfw
+
Build procedure:
----------------
0. Setup the environment variables:
diff --git a/doc/board/ti/j7200_evm.rst b/doc/board/ti/j7200_evm.rst
index d4a823fa26ca..4fd2aff83547 100644
--- a/doc/board/ti/j7200_evm.rst
+++ b/doc/board/ti/j7200_evm.rst
@@ -47,6 +47,10 @@ Sources:
:start-after: .. k3_rst_include_start_boot_sources
:end-before: .. k3_rst_include_end_boot_sources
+.. include:: k3.rst
+ :start-after: .. k3_rst_include_start_boot_firmwares
+ :end-before: .. k3_rst_include_end_boot_firmwares
+
Build procedure:
----------------
0. Setup the environment variables:
diff --git a/doc/board/ti/j721e_evm.rst b/doc/board/ti/j721e_evm.rst
index 80d91cafab08..41c8d4c72a8d 100644
--- a/doc/board/ti/j721e_evm.rst
+++ b/doc/board/ti/j721e_evm.rst
@@ -52,6 +52,10 @@ Sources:
:start-after: .. k3_rst_include_start_boot_sources
:end-before: .. k3_rst_include_end_boot_sources
+.. include:: ../ti/k3.rst
+ :start-after: .. k3_rst_include_start_boot_firmwares
+ :end-before: .. k3_rst_include_end_boot_firmwares
+
Build procedure:
----------------
0. Setup the environment variables:
diff --git a/doc/board/ti/j721s2_evm.rst b/doc/board/ti/j721s2_evm.rst
index f5c48c96a837..21683b90b1a8 100644
--- a/doc/board/ti/j721s2_evm.rst
+++ b/doc/board/ti/j721s2_evm.rst
@@ -60,6 +60,10 @@ Sources:
:start-after: .. k3_rst_include_start_boot_sources
:end-before: .. k3_rst_include_end_boot_sources
+.. include:: k3.rst
+ :start-after: .. k3_rst_include_start_boot_firmwares
+ :end-before: .. k3_rst_include_end_boot_firmwares
+
Build procedure:
----------------
diff --git a/doc/board/ti/j722s_evm.rst b/doc/board/ti/j722s_evm.rst
index 10b243908a1c..e5a1be50c4fa 100644
--- a/doc/board/ti/j722s_evm.rst
+++ b/doc/board/ti/j722s_evm.rst
@@ -45,6 +45,10 @@ Sources:
:start-after: .. k3_rst_include_start_boot_sources
:end-before: .. k3_rst_include_end_boot_sources
+.. include:: ../ti/k3.rst
+ :start-after: .. k3_rst_include_start_boot_firmwares
+ :end-before: .. k3_rst_include_end_boot_firmwares
+
Build procedure:
----------------
diff --git a/doc/board/ti/j784s4_evm.rst b/doc/board/ti/j784s4_evm.rst
index 2ffec3dbd3be..a1e927cb7438 100644
--- a/doc/board/ti/j784s4_evm.rst
+++ b/doc/board/ti/j784s4_evm.rst
@@ -60,6 +60,10 @@ Sources
:start-after: .. k3_rst_include_start_boot_sources
:end-before: .. k3_rst_include_end_boot_sources
+.. include:: k3.rst
+ :start-after: .. k3_rst_include_start_boot_firmwares
+ :end-before: .. k3_rst_include_end_boot_firmwares
+
Build procedure
---------------
0. Setup the environment variables:
--
2.34.1
next prev parent reply other threads:[~2024-08-05 14:30 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-05 14:29 [PATCH V8 0/7] Low Power Mode: Package TIFS Stub in BeaglePlay Dhruva Gole
2024-08-05 14:29 ` [PATCH V8 1/7] MAINTAINERS: Include the TI docs under ARM TI Dhruva Gole
2024-08-05 14:29 ` [PATCH V8 2/7] doc: ti: k3: Add TIFS Stub documentation Dhruva Gole
2024-08-08 15:48 ` Francesco Dolcini
2024-08-05 14:29 ` Dhruva Gole [this message]
2024-08-05 14:29 ` [PATCH V8 4/7] doc: ti: am62*: Mention TIFS Stub in img fmts and boot flow Dhruva Gole
2024-08-05 14:29 ` [PATCH V8 5/7] arm: dts: k3-am625-beagleplay: Package TIFS Stub Dhruva Gole
2024-08-05 14:29 ` [PATCH V8 6/7] doc: beagle: am62x_beagleplay: Document the use of " Dhruva Gole
2024-08-05 14:29 ` [PATCH V8 7/7] arm: dts: phycore-am62x: Package " Dhruva Gole
2024-08-09 4:36 ` [PATCH V8 0/7] Low Power Mode: Package TIFS Stub in BeaglePlay Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240805142937.443737-4-d-gole@ti.com \
--to=d-gole@ti.com \
--cc=c-shilwant@ti.com \
--cc=d.schultz@phytec.de \
--cc=m-chawdhry@ti.com \
--cc=mkorpershoek@baylibre.com \
--cc=n-francis@ti.com \
--cc=nm@ti.com \
--cc=robertcnelson@gmail.com \
--cc=sebin.francis@ti.com \
--cc=t.remmet@phytec.de \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=vibhore@ti.com \
--cc=vigneshr@ti.com \
--cc=vishalm@ti.com \
--cc=w.egorov@phytec.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.