From: Andrew Morton <akpm@linux-foundation.org>
To: mm-commits@vger.kernel.org,ziy@nvidia.com,will@kernel.org,tsbogend@alpha.franken.de,tglx@linutronix.de,samuel.holland@sifive.com,robh@kernel.org,rafael@kernel.org,palmer@dabbelt.com,mpe@ellerman.id.au,mingo@redhat.com,Jonathan.Cameron@huawei.com,jiaxun.yang@flygoat.com,hca@linux.ibm.com,gregkh@linuxfoundation.org,gor@linux.ibm.com,glaubitz@physik.fu-berlin.de,david@redhat.com,dave@stgolabs.net,davem@davemloft.net,dave.hansen@linux.intel.com,dan.j.williams@intel.com,corbet@lwn.net,christophe.leroy@csgroup.eu,chenhuacai@kernel.org,catalin.marinas@arm.com,bp@alien8.de,arnd@arndb.de,andreas@gaisler.com,agordeev@linux.ibm.com,rppt@kernel.org,akpm@linux-foundation.org
Subject: + mm-drop-config_have_arch_nodedata_extension.patch added to mm-unstable branch
Date: Wed, 07 Aug 2024 13:59:02 -0700 [thread overview]
Message-ID: <20240807205902.BE863C32781@smtp.kernel.org> (raw)
The patch titled
Subject: mm: drop CONFIG_HAVE_ARCH_NODEDATA_EXTENSION
has been added to the -mm mm-unstable branch. Its filename is
mm-drop-config_have_arch_nodedata_extension.patch
This patch will shortly appear at
https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patches/mm-drop-config_have_arch_nodedata_extension.patch
This patch will later appear in the mm-unstable branch at
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/process/submit-checklist.rst when testing your code ***
The -mm tree is included into linux-next via the mm-everything
branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
and is updated there every 2-3 working days
------------------------------------------------------
From: "Mike Rapoport (Microsoft)" <rppt@kernel.org>
Subject: mm: drop CONFIG_HAVE_ARCH_NODEDATA_EXTENSION
Date: Wed, 7 Aug 2024 09:40:52 +0300
There are no users of HAVE_ARCH_NODEDATA_EXTENSION left, so
arch_alloc_nodedata() and arch_refresh_nodedata() are not needed anymore.
Replace the call to arch_alloc_nodedata() in free_area_init() with a new
helper alloc_offline_node_data(), remove arch_refresh_nodedata() and
cleanup include/linux/memory_hotplug.h from the associated ifdefery.
Link: https://lkml.kernel.org/r/20240807064110.1003856-9-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Tested-by: Zi Yan <ziy@nvidia.com> # for x86_64 and arm64
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Rob Herring (Arm) <robh@kernel.org>
Cc: Samuel Holland <samuel.holland@sifive.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
include/linux/memory_hotplug.h | 48 -------------------------------
include/linux/numa.h | 4 ++
mm/mm_init.c | 10 +-----
mm/numa.c | 12 +++++++
4 files changed, 18 insertions(+), 56 deletions(-)
--- a/include/linux/memory_hotplug.h~mm-drop-config_have_arch_nodedata_extension
+++ a/include/linux/memory_hotplug.h
@@ -16,54 +16,6 @@ struct resource;
struct vmem_altmap;
struct dev_pagemap;
-#ifdef CONFIG_HAVE_ARCH_NODEDATA_EXTENSION
-/*
- * For supporting node-hotadd, we have to allocate a new pgdat.
- *
- * If an arch has generic style NODE_DATA(),
- * node_data[nid] = kzalloc() works well. But it depends on the architecture.
- *
- * In general, generic_alloc_nodedata() is used.
- *
- */
-extern pg_data_t *arch_alloc_nodedata(int nid);
-extern void arch_refresh_nodedata(int nid, pg_data_t *pgdat);
-
-#else /* CONFIG_HAVE_ARCH_NODEDATA_EXTENSION */
-
-#define arch_alloc_nodedata(nid) generic_alloc_nodedata(nid)
-
-#ifdef CONFIG_NUMA
-/*
- * XXX: node aware allocation can't work well to get new node's memory at this time.
- * Because, pgdat for the new node is not allocated/initialized yet itself.
- * To use new node's memory, more consideration will be necessary.
- */
-#define generic_alloc_nodedata(nid) \
-({ \
- memblock_alloc(sizeof(*pgdat), SMP_CACHE_BYTES); \
-})
-
-extern pg_data_t *node_data[];
-static inline void arch_refresh_nodedata(int nid, pg_data_t *pgdat)
-{
- node_data[nid] = pgdat;
-}
-
-#else /* !CONFIG_NUMA */
-
-/* never called */
-static inline pg_data_t *generic_alloc_nodedata(int nid)
-{
- BUG();
- return NULL;
-}
-static inline void arch_refresh_nodedata(int nid, pg_data_t *pgdat)
-{
-}
-#endif /* CONFIG_NUMA */
-#endif /* CONFIG_HAVE_ARCH_NODEDATA_EXTENSION */
-
#ifdef CONFIG_MEMORY_HOTPLUG
struct page *pfn_to_online_page(unsigned long pfn);
--- a/include/linux/numa.h~mm-drop-config_have_arch_nodedata_extension
+++ a/include/linux/numa.h
@@ -33,6 +33,8 @@ static inline bool numa_valid_node(int n
extern struct pglist_data *node_data[];
#define NODE_DATA(nid) (node_data[nid])
+void __init alloc_offline_node_data(int nid);
+
/* Generic implementation available */
int numa_nearest_node(int node, unsigned int state);
@@ -60,6 +62,8 @@ static inline int phys_to_target_node(u6
{
return 0;
}
+
+static inline void alloc_offline_node_data(int nid) {}
#endif
#define numa_map_to_online_node(node) numa_nearest_node(node, N_ONLINE)
--- a/mm/mm_init.c~mm-drop-config_have_arch_nodedata_extension
+++ a/mm/mm_init.c
@@ -1836,14 +1836,8 @@ void __init free_area_init(unsigned long
for_each_node(nid) {
pg_data_t *pgdat;
- if (!node_online(nid)) {
- /* Allocator not initialized yet */
- pgdat = arch_alloc_nodedata(nid);
- if (!pgdat)
- panic("Cannot allocate %zuB for node %d.\n",
- sizeof(*pgdat), nid);
- arch_refresh_nodedata(nid, pgdat);
- }
+ if (!node_online(nid))
+ alloc_offline_node_data(nid);
pgdat = NODE_DATA(nid);
free_area_init_node(nid);
--- a/mm/numa.c~mm-drop-config_have_arch_nodedata_extension
+++ a/mm/numa.c
@@ -6,6 +6,18 @@
struct pglist_data *node_data[MAX_NUMNODES];
EXPORT_SYMBOL(node_data);
+void __init alloc_offline_node_data(int nid)
+{
+ pg_data_t *pgdat;
+
+ pgdat = memblock_alloc(sizeof(*pgdat), SMP_CACHE_BYTES);
+ if (!pgdat)
+ panic("Cannot allocate %zuB for node %d.\n",
+ sizeof(*pgdat), nid);
+
+ node_data[nid] = pgdat;
+}
+
/* Stub functions: */
#ifndef memory_add_physaddr_to_nid
_
Patches currently in -mm which might be from rppt@kernel.org are
mm-move-kernel-numac-to-mm.patch
mips-sgi-ip27-make-node_data-the-same-as-on-all-other-architectures.patch
mips-sgi-ip27-ensure-node_possible_map-only-contains-valid-nodes.patch
mips-sgi-ip27-drop-have_arch_nodedata_extension.patch
mips-loongson64-rename-__node_data-to-node_data.patch
mips-loongson64-drop-have_arch_nodedata_extension.patch
arch-mm-move-definition-of-node_data-to-generic-code.patch
mm-drop-config_have_arch_nodedata_extension.patch
arch-mm-pull-out-allocation-of-node_data-to-generic-code.patch
x86-numa-simplify-numa_distance-allocation.patch
x86-numa-use-get_pfn_range_for_nid-to-verify-that-node-spans-memory.patch
x86-numa-move-fake_node_-defines-to-numa_emu.patch
x86-numa_emu-simplify-allocation-of-phys_dist.patch
x86-numa_emu-split-__apicid_to_node-update-to-a-helper-function.patch
x86-numa_emu-use-a-helper-function-to-get-max_dma32_pfn.patch
x86-numa-numa_addremove_cpu-make-cpu-parameter-unsigned.patch
mm-introduce-numa_memblks.patch
mm-move-numa_distance-and-related-code-from-x86-to-numa_memblks.patch
mm-introduce-numa_emulation.patch
mm-numa_memblks-introduce-numa_memblks_init.patch
mm-numa_memblks-make-several-functions-and-variables-static.patch
mm-numa_memblks-use-memblock_startend_of_dram-when-sanitizing-meminfo.patch
of-numa-return-einval-when-no-numa-node-id-is-found.patch
arch_numa-switch-over-to-numa_memblks.patch
arch_numa-switch-over-to-numa_memblks-fix.patch
mm-make-range-to-target_node-lookup-facility-a-part-of-numa_memblks.patch
docs-move-numa=fake-description-to-kernel-parameterstxt.patch
next reply other threads:[~2024-08-07 20:59 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-07 20:59 Andrew Morton [this message]
-- strict thread matches above, loose matches on Subject: below --
2024-08-03 18:42 + mm-drop-config_have_arch_nodedata_extension.patch added to mm-unstable branch Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240807205902.BE863C32781@smtp.kernel.org \
--to=akpm@linux-foundation.org \
--cc=Jonathan.Cameron@huawei.com \
--cc=agordeev@linux.ibm.com \
--cc=andreas@gaisler.com \
--cc=arnd@arndb.de \
--cc=bp@alien8.de \
--cc=catalin.marinas@arm.com \
--cc=chenhuacai@kernel.org \
--cc=christophe.leroy@csgroup.eu \
--cc=corbet@lwn.net \
--cc=dan.j.williams@intel.com \
--cc=dave.hansen@linux.intel.com \
--cc=dave@stgolabs.net \
--cc=davem@davemloft.net \
--cc=david@redhat.com \
--cc=glaubitz@physik.fu-berlin.de \
--cc=gor@linux.ibm.com \
--cc=gregkh@linuxfoundation.org \
--cc=hca@linux.ibm.com \
--cc=jiaxun.yang@flygoat.com \
--cc=mingo@redhat.com \
--cc=mm-commits@vger.kernel.org \
--cc=mpe@ellerman.id.au \
--cc=palmer@dabbelt.com \
--cc=rafael@kernel.org \
--cc=robh@kernel.org \
--cc=rppt@kernel.org \
--cc=samuel.holland@sifive.com \
--cc=tglx@linutronix.de \
--cc=tsbogend@alpha.franken.de \
--cc=will@kernel.org \
--cc=ziy@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.