From: "Michael S. Tsirkin" <mst@redhat.com>
To: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>,
Shiju Jose <shiju.jose@huawei.com>,
Ani Sinha <anisinha@redhat.com>,
Igor Mammedov <imammedo@redhat.com>,
linux-kernel@vger.kernel.org, qemu-devel@nongnu.org
Subject: Re: [PATCH v7 01/10] acpi/generic_event_device: add an APEI error device
Date: Wed, 14 Aug 2024 03:38:43 -0400 [thread overview]
Message-ID: <20240814033158-mutt-send-email-mst@kernel.org> (raw)
In-Reply-To: <0be6db8d06b3abab551f24dcc645d46d72d3f668.1723591201.git.mchehab+huawei@kernel.org>
On Wed, Aug 14, 2024 at 01:23:23AM +0200, Mauro Carvalho Chehab wrote:
> Adds a generic error device to handle generic hardware error
> events as specified at ACPI 6.5 specification at 18.3.2.7.2:
> https://uefi.org/specs/ACPI/6.5/18_Platform_Error_Interfaces.html#event-notification-for-generic-error-sources
> using HID PNP0C33.
>
> The PNP0C33 device is used to report hardware errors to
> the guest via ACPI APEI Generic Hardware Error Source (GHES).
>
> Co-authored-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> Co-authored-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
> ---
> hw/acpi/aml-build.c | 10 ++++++++++
> hw/acpi/generic_event_device.c | 8 ++++++++
> include/hw/acpi/acpi_dev_interface.h | 1 +
> include/hw/acpi/aml-build.h | 2 ++
> include/hw/acpi/generic_event_device.h | 1 +
> 5 files changed, 22 insertions(+)
>
> diff --git a/hw/acpi/aml-build.c b/hw/acpi/aml-build.c
> index 6d4517cfbe3d..cb167523859f 100644
> --- a/hw/acpi/aml-build.c
> +++ b/hw/acpi/aml-build.c
> @@ -2520,3 +2520,13 @@ Aml *aml_i2c_serial_bus_device(uint16_t address, const char *resource_source)
>
> return var;
> }
> +
> +/* ACPI 5.0: 18.3.2.6.2 Event Notification For Generic Error Sources */
I could not find Event Notification For Generic Error Sources in ACPI
5.0.
Instead, I see
18.3.2.6.2 SCI Notification For Generic Error Sources
What did I miss?
> +Aml *aml_error_device(void)
> +{
> + Aml *dev = aml_device(ACPI_APEI_ERROR_DEVICE);
> + aml_append(dev, aml_name_decl("_HID", aml_string("PNP0C33")));
> + aml_append(dev, aml_name_decl("_UID", aml_int(0)));
> +
comment on why is this here?
> + return dev;
> +}
> diff --git a/hw/acpi/generic_event_device.c b/hw/acpi/generic_event_device.c
> index 15b4c3ebbf24..1673e9695be3 100644
> --- a/hw/acpi/generic_event_device.c
> +++ b/hw/acpi/generic_event_device.c
> @@ -26,6 +26,7 @@ static const uint32_t ged_supported_events[] = {
> ACPI_GED_PWR_DOWN_EVT,
> ACPI_GED_NVDIMM_HOTPLUG_EVT,
> ACPI_GED_CPU_HOTPLUG_EVT,
> + ACPI_GED_ERROR_EVT
> };
>
> /*
> @@ -116,6 +117,11 @@ void build_ged_aml(Aml *table, const char *name, HotplugHandler *hotplug_dev,
> aml_notify(aml_name(ACPI_POWER_BUTTON_DEVICE),
> aml_int(0x80)));
> break;
> + case ACPI_GED_ERROR_EVT:
> + aml_append(if_ctx,
> + aml_notify(aml_name(ACPI_APEI_ERROR_DEVICE),
> + aml_int(0x80)));
> + break;
> case ACPI_GED_NVDIMM_HOTPLUG_EVT:
> aml_append(if_ctx,
> aml_notify(aml_name("\\_SB.NVDR"),
> @@ -295,6 +301,8 @@ static void acpi_ged_send_event(AcpiDeviceIf *adev, AcpiEventStatusBits ev)
> sel = ACPI_GED_MEM_HOTPLUG_EVT;
> } else if (ev & ACPI_POWER_DOWN_STATUS) {
> sel = ACPI_GED_PWR_DOWN_EVT;
> + } else if (ev & ACPI_GENERIC_ERROR) {
> + sel = ACPI_GED_ERROR_EVT;
> } else if (ev & ACPI_NVDIMM_HOTPLUG_STATUS) {
> sel = ACPI_GED_NVDIMM_HOTPLUG_EVT;
> } else if (ev & ACPI_CPU_HOTPLUG_STATUS) {
> diff --git a/include/hw/acpi/acpi_dev_interface.h b/include/hw/acpi/acpi_dev_interface.h
> index 68d9d15f50aa..8294f8f0ccca 100644
> --- a/include/hw/acpi/acpi_dev_interface.h
> +++ b/include/hw/acpi/acpi_dev_interface.h
> @@ -13,6 +13,7 @@ typedef enum {
> ACPI_NVDIMM_HOTPLUG_STATUS = 16,
> ACPI_VMGENID_CHANGE_STATUS = 32,
> ACPI_POWER_DOWN_STATUS = 64,
> + ACPI_GENERIC_ERROR = 128,
> } AcpiEventStatusBits;
>
> #define TYPE_ACPI_DEVICE_IF "acpi-device-interface"
> diff --git a/include/hw/acpi/aml-build.h b/include/hw/acpi/aml-build.h
> index a3784155cb33..44d1a6af0c69 100644
> --- a/include/hw/acpi/aml-build.h
> +++ b/include/hw/acpi/aml-build.h
> @@ -252,6 +252,7 @@ struct CrsRangeSet {
> /* Consumer/Producer */
> #define AML_SERIAL_BUS_FLAG_CONSUME_ONLY (1 << 1)
>
> +#define ACPI_APEI_ERROR_DEVICE "GEDD"
> /**
> * init_aml_allocator:
> *
> @@ -382,6 +383,7 @@ Aml *aml_dma(AmlDmaType typ, AmlDmaBusMaster bm, AmlTransferSize sz,
> uint8_t channel);
> Aml *aml_sleep(uint64_t msec);
> Aml *aml_i2c_serial_bus_device(uint16_t address, const char *resource_source);
> +Aml *aml_error_device(void);
>
> /* Block AML object primitives */
> Aml *aml_scope(const char *name_format, ...) G_GNUC_PRINTF(1, 2);
> diff --git a/include/hw/acpi/generic_event_device.h b/include/hw/acpi/generic_event_device.h
> index 40af3550b56d..9ace8fe70328 100644
> --- a/include/hw/acpi/generic_event_device.h
> +++ b/include/hw/acpi/generic_event_device.h
> @@ -98,6 +98,7 @@ OBJECT_DECLARE_SIMPLE_TYPE(AcpiGedState, ACPI_GED)
> #define ACPI_GED_PWR_DOWN_EVT 0x2
> #define ACPI_GED_NVDIMM_HOTPLUG_EVT 0x4
> #define ACPI_GED_CPU_HOTPLUG_EVT 0x8
> +#define ACPI_GED_ERROR_EVT 0x10
>
> typedef struct GEDState {
> MemoryRegion evt;
> --
> 2.46.0
next prev parent reply other threads:[~2024-08-14 7:40 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-13 23:23 [PATCH v7 00/10] Add ACPI CPER firmware first error injection on ARM emulation Mauro Carvalho Chehab
2024-08-13 23:23 ` [PATCH v7 01/10] acpi/generic_event_device: add an APEI error device Mauro Carvalho Chehab
2024-08-14 7:38 ` Michael S. Tsirkin [this message]
2024-08-14 12:33 ` Jonathan Cameron via
2024-08-14 12:33 ` Jonathan Cameron
2024-08-16 5:53 ` Mauro Carvalho Chehab
2024-08-16 10:42 ` Jonathan Cameron via
2024-08-16 10:42 ` Jonathan Cameron
2024-08-13 23:23 ` [PATCH v7 02/10] arm/virt: Wire up a GED error device for ACPI / GHES Mauro Carvalho Chehab
2024-08-14 12:35 ` Jonathan Cameron
2024-08-14 12:35 ` Jonathan Cameron via
2024-08-13 23:23 ` [PATCH v7 03/10] acpi/ghes: Add support for GED error device Mauro Carvalho Chehab
2024-08-14 13:50 ` Jonathan Cameron via
2024-08-14 13:50 ` Jonathan Cameron
2024-08-14 13:50 ` Jonathan Cameron via
2024-08-13 23:23 ` [PATCH v7 04/10] qapi/acpi-hest: add an interface to do generic CPER error injection Mauro Carvalho Chehab
2024-08-14 13:53 ` Jonathan Cameron
2024-08-14 13:53 ` Jonathan Cameron via
2024-08-14 17:15 ` Mauro Carvalho Chehab
2024-08-13 23:23 ` [PATCH v7 05/10] acpi/ghes: rework the logic to handle HEST source ID Mauro Carvalho Chehab
2024-08-16 5:44 ` Mauro Carvalho Chehab
2024-08-13 23:23 ` [PATCH v7 06/10] acpi/ghes: add support for generic error injection via QAPI Mauro Carvalho Chehab
2024-08-13 23:23 ` [PATCH v7 07/10] docs: acpi_hest_ghes: fix documentation for CPER size Mauro Carvalho Chehab
2024-08-13 23:23 ` [PATCH v7 08/10] scripts/ghes_inject: add a script to generate GHES error inject Mauro Carvalho Chehab
2024-08-13 23:23 ` [PATCH v7 09/10] target/arm: add an experimental mpidr arm cpu property object Mauro Carvalho Chehab
2024-08-13 23:23 ` [PATCH v7 10/10] scripts/arm_processor_error.py: retrieve mpidr if not filled Mauro Carvalho Chehab
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240814033158-mutt-send-email-mst@kernel.org \
--to=mst@redhat.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=anisinha@redhat.com \
--cc=imammedo@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mchehab+huawei@kernel.org \
--cc=qemu-devel@nongnu.org \
--cc=shiju.jose@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.