From: Frank Li <Frank.Li@nxp.com>
To: Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
linux-hwmon@vger.kernel.org (open list:HARDWARE MONITORING),
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
linux-kernel@vger.kernel.org (open list)
Cc: imx@lists.linux.dev
Subject: [PATCH 1/1] dt-bindings: hwmon/regulator: Convert ltc2978.txt to yaml
Date: Wed, 14 Aug 2024 14:17:26 -0400 [thread overview]
Message-ID: <20240814181727.4030958-1-Frank.Li@nxp.com> (raw)
Convert binding doc ltc2978.txt to yaml format.
Additional change:
- add i2c node.
- basic it is regulator according to example, move it under regulator.
Fix below warning:
arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dtb: /soc/i2c@2000000/i2c-mux@77/i2c@2/regulator@5c:
failed to match any schema with compatible: ['lltc,ltc3882']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
.../devicetree/bindings/hwmon/ltc2978.txt | 62 ------------
.../bindings/regulator/lltc,ltc2972.yaml | 94 +++++++++++++++++++
2 files changed, 94 insertions(+), 62 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/hwmon/ltc2978.txt
create mode 100644 Documentation/devicetree/bindings/regulator/lltc,ltc2972.yaml
diff --git a/Documentation/devicetree/bindings/hwmon/ltc2978.txt b/Documentation/devicetree/bindings/hwmon/ltc2978.txt
deleted file mode 100644
index 4e7f6215a4533..0000000000000
--- a/Documentation/devicetree/bindings/hwmon/ltc2978.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-ltc2978
-
-Required properties:
-- compatible: should contain one of:
- * "lltc,ltc2972"
- * "lltc,ltc2974"
- * "lltc,ltc2975"
- * "lltc,ltc2977"
- * "lltc,ltc2978"
- * "lltc,ltc2979"
- * "lltc,ltc2980"
- * "lltc,ltc3880"
- * "lltc,ltc3882"
- * "lltc,ltc3883"
- * "lltc,ltc3884"
- * "lltc,ltc3886"
- * "lltc,ltc3887"
- * "lltc,ltc3889"
- * "lltc,ltc7880"
- * "lltc,ltm2987"
- * "lltc,ltm4664"
- * "lltc,ltm4675"
- * "lltc,ltm4676"
- * "lltc,ltm4677"
- * "lltc,ltm4678"
- * "lltc,ltm4680"
- * "lltc,ltm4686"
- * "lltc,ltm4700"
-- reg: I2C slave address
-
-Optional properties:
-- regulators: A node that houses a sub-node for each regulator controlled by
- the device. Each sub-node is identified using the node's name, with valid
- values listed below. The content of each sub-node is defined by the
- standard binding for regulators; see regulator.txt.
-
-Valid names of regulators depend on number of supplies supported per device:
- * ltc2972 vout0 - vout1
- * ltc2974, ltc2975 : vout0 - vout3
- * ltc2977, ltc2979, ltc2980, ltm2987 : vout0 - vout7
- * ltc2978 : vout0 - vout7
- * ltc3880, ltc3882, ltc3884, ltc3886, ltc3887, ltc3889 : vout0 - vout1
- * ltc7880 : vout0 - vout1
- * ltc3883 : vout0
- * ltm4664 : vout0 - vout1
- * ltm4675, ltm4676, ltm4677, ltm4678 : vout0 - vout1
- * ltm4680, ltm4686 : vout0 - vout1
- * ltm4700 : vout0 - vout1
-
-Example:
-ltc2978@5e {
- compatible = "lltc,ltc2978";
- reg = <0x5e>;
- regulators {
- vout0 {
- regulator-name = "FPGA-2.5V";
- };
- vout2 {
- regulator-name = "FPGA-1.5V";
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/regulator/lltc,ltc2972.yaml b/Documentation/devicetree/bindings/regulator/lltc,ltc2972.yaml
new file mode 100644
index 0000000000000..20ae6152a2572
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/lltc,ltc2972.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/lltc,ltc2972.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ltc2978
+
+maintainers:
+ - Jean Delvare <jdelvare@suse.com>
+
+properties:
+ compatible:
+ enum:
+ - lltc,ltc2972
+ - lltc,ltc2974
+ - lltc,ltc2975
+ - lltc,ltc2977
+ - lltc,ltc2978
+ - lltc,ltc2979
+ - lltc,ltc2980
+ - lltc,ltc3880
+ - lltc,ltc3882
+ - lltc,ltc3883
+ - lltc,ltc3884
+ - lltc,ltc3886
+ - lltc,ltc3887
+ - lltc,ltc3889
+ - lltc,ltc7880
+ - lltc,ltm2987
+ - lltc,ltm4664
+ - lltc,ltm4675
+ - lltc,ltm4676
+ - lltc,ltm4677
+ - lltc,ltm4678
+ - lltc,ltm4680
+ - lltc,ltm4686
+ - lltc,ltm4700
+
+ reg:
+ maxItems: 1
+
+ regulators:
+ type: object
+ description: |
+ list of regulators provided by this controller.
+ Valid names of regulators depend on number of supplies supported per device:
+ * ltc2972 vout0 - vout1
+ * ltc2974, ltc2975 : vout0 - vout3
+ * ltc2977, ltc2979, ltc2980, ltm2987 : vout0 - vout7
+ * ltc2978 : vout0 - vout7
+ * ltc3880, ltc3882, ltc3884, ltc3886, ltc3887, ltc3889 : vout0 - vout1
+ * ltc7880 : vout0 - vout1
+ * ltc3883 : vout0
+ * ltm4664 : vout0 - vout1
+ * ltm4675, ltm4676, ltm4677, ltm4678 : vout0 - vout1
+ * ltm4680, ltm4686 : vout0 - vout1
+ * ltm4700 : vout0 - vout1
+
+ patternProperties:
+ "^vout[0-7]$":
+ $ref: regulator.yaml#
+ type: object
+ unevaluatedProperties: false
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ regulator@5e {
+ compatible = "lltc,ltc2978";
+ reg = <0x5e>;
+
+ regulators {
+ vout0 {
+ regulator-name = "FPGA-2.5V";
+ };
+ vout2 {
+ regulator-name = "FPGA-1.5V";
+ };
+ };
+ };
+ };
+
--
2.34.1
next reply other threads:[~2024-08-14 18:17 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-14 18:17 Frank Li [this message]
2024-08-16 21:55 ` [PATCH 1/1] dt-bindings: hwmon/regulator: Convert ltc2978.txt to yaml Rob Herring
2024-08-16 22:04 ` Mark Brown
2024-08-17 0:03 ` Guenter Roeck
2024-08-17 2:01 ` Frank Li
2024-08-17 3:34 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240814181727.4030958-1-Frank.Li@nxp.com \
--to=frank.li@nxp.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=imx@lists.linux.dev \
--cc=jdelvare@suse.com \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.